This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
DEHB (Distributed Electro-hydraulic Braking System) Having a Holding Function
Technical Paper
2015-01-0017
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Many types of brake by wire systems have been developed in past years, such as EMB (Electro-mechanical Brake) [1, 2], DEHB (Distributed Electro-hydraulic Braking System) [3] and EWB (Electric Wedge Brake) [4]. When the vehicle need braking in long period such as waiting for traffic light or downhill braking in those brake systems, the current will sustain very long time with very high level. This current will result in high temperature in motor, and will damage the power supplier. When a new DEHB is developing, a holding function is added in this DEHB. The holding function is self-energized when holding the brake, and automatic released after the brake. Advantageously, after activation of the holding function, the current delivered to the motor for braking is substantially decreased, especially, will be zero when the brake torque is not need to adjust. The holding function is fully mechanical, that means the holding function do not consume any power, and do not need to control it specially. The holding function can also be integrated into the other types of brake by wire systems. In this paper, prototype of the DEHB with holding function was described. The system is tested, which show the benefit in the power saving and motor requirements.
Authors
Citation
Wang, Y., Wang, Z., Yu, L., and Song, J., "DEHB (Distributed Electro-hydraulic Braking System) Having a Holding Function," SAE Technical Paper 2015-01-0017, 2015, https://doi.org/10.4271/2015-01-0017.Also In
References
- Nakamura , E. , Soga , M. , Sakai , A. , Otomo , A. et al. Development of Electronically Controlled Brake System for Hybrid Vehicle SAE Technical Paper 2002-01-0300 2002 10.4271/2002-01-0300
- Aoki , Y. , Suzuki , K. , Nakano , H. , Akamine , K. et al. Development of Hydraulic Servo Brake System for Cooperative Control with Regenerative Brake SAE Technical Paper 2007-01-0868 2007 10.4271/2007-01-0868
- Wang , Z. , Yu , L. , Wang , Y. , You , C. et al. Prototype of Distributed Electro-Hydraulic Braking System and its Fail-Safe Control Strategy SAE Technical Paper 2013-01-2066 2013 10.4271/2013-01-2066
- Hartmann , H. , Schautt , M. , Pascucci , A. , and Gombert , B. eBrake® - The Mechatronic Wedge Brake SAE Technical Paper 2002-01-2582 2002 10.4271/2002-01-2582
- von Albrichsfeld , C. and Karner , J. Brake System for Hybrid and Electric Vehicles SAE Technical Paper 2009-01-1217 2009 10.4271/2009-01-1217
- Wang , Z. , Yu , L. , Wang , Y. , Wu , K. et al. Design Concepts of the Four-Wheel-Independent Electro-Hydraulic Braking System SAE Technical Paper 2014-01-2537 2014 10.4271/2014-01-2537
- Schenk , D. , Wells , R. , and Miller , J. Intelligent Braking for Current and Future Vehicles SAE Technical Paper 950762 1995 10.4271/950762
- Maron , C. , Dieckmann , T. , Hauck , S. , and Prinzler , H. Electromechanical Brake System: Actuator Control Development System SAE Technical Paper 970814 1997 10.4271/970814
- Cheon , J. , Kim , J. , and Jeon , J. New Brake By Wire Concept with Mechanical Backup SAE Int. J. Passeng. Cars - Mech. Syst. 5 4 1194 1198 2012 10.4271/2012-01-1800
- Hesse , S. , Konrad , G. , Reichel , R. , Schäfer , I. et al. An Electro - Mechanical Actuator for General Aviation Aircraft SAE Technical Paper 2007-01-3900 2007 10.4271/2007-01-3900
- Robert Bosch GmbH, Stuttgart (DE) ELECTRICAL BRAKE HAVING A HOLDING BRAKE FUNCTION US 6,460,661 Bl
- Tsinghua University One type of Distribute electric hydraulic brake system with electrical valves CN201110391204
- Irby , S. , Kaufman , K. , Wirta , R. , Sutherland , D. Optimization and Application of a Wrap-Spring Clutch to a Dynamic Knee-Ankle-Foot Orthosis IEEE TRANSACTIONS ON REHABILITATION ENGINEERING 7 2 JUNE 1999
- Weibusch , C. The spring clutch J. Appl. Mechan. A 103 108 1939