This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Study on Combustion Noise in Small General Purpose Engines
Technical Paper
2014-32-0105
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
For a small general purpose engine, the authors have studied on “combustion noise”, the mechanical noise originating from combustion. The purpose of this study is to clarify the mechanisms of combustion noise generation.
The engine used in this study was a 4-stroke air-cooled single-cylinder engine with the typical characteristics of 3.5 kW-class small general purpose engines, which was specifically designed for experiments. We analyzed the operational behaviors of parts such as the crankshaft, the flywheel and the crankcase during the time of occurrence of combustion noise.
Results of the analysis showed that the primary component of combustion noise in small general purpose engines is radiated from the flywheel connected to the crankshaft, and that the vibration mode that radiates the noise is excited by bending deformation of the crankshaft under explosion load.
Based on these results, this paper will also discuss the effect of the stiffness of the main bearings on combustion noise.
Recommended Content
Technical Paper | MEASUREMENT OF ENGINE VIBRATION PHENOMENA |
Technical Paper | PRACTICAL BALANCING OF ENGINE COMPONENTS |
Technical Paper | Prediction Technique for Vibration of Power-Plant with Elastic Crankshaft System |
Topic
Citation
Maruyama, A. and Naoe, G., "Study on Combustion Noise in Small General Purpose Engines," SAE Technical Paper 2014-32-0105, 2014, https://doi.org/10.4271/2014-32-0105.Also In
References
- Matsuoka , N. Theoretical Comparison and Future Forecast on S.I and C.I Engine for Better Fuel Consumption Journal of Society of Automotive Engineers of Japan 35 10 1118 1123 1981
- Kyu , N. Hirotaka , K. 1.2L Dual Jet Gasoline Engine development for SWIFT JSEA Symposium, 20134941 2013
- Hiroki , k. , Atsushi , I. , Toshiro , A. Dynamic Behavior Analysis and Rumbling Noise of SI Engine Crankshaft Journal of Society of Automotive Engineers of Japan 46 6 51 56 1992
- Takeo Okamura , H. , and Sogabe , K. Experiments and Analyses of the Three-Dimensional Vibrations of the Crankshaft and Torsional Damper in a Four-Cylinder In-Line High Speed Engine SAE Technical Paper 971996 1997 10.4271/971996
- Directive 2000/14/EC Official Journal of the European Communities, OJ L 162 3 7 2000 2000
- Noumura , k. Theory and example of operational transfer path analysis Journal of The Acoustical Society of Japan 67 4 163 168 2011 04 01
- Ishihama , M. , Hayashi , Y. , and Kubozuka , T. An Analysis of the Movement of the Crankshaft Journals during Engine Firing SAE Technical Paper 810772 1981 10.4271/810772