This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Spray Penetrations of Ethanol, Gasoline and Iso-Octane in an Optically Accessible Spark-Ignition Direct-Injection Engine

Journal Article
2014-01-9079
ISSN: 1946-3952, e-ISSN: 1946-3960
Published November 01, 2014 by SAE International in United States
Spray Penetrations of Ethanol, Gasoline and Iso-Octane in an Optically Accessible Spark-Ignition Direct-Injection Engine
Sector:
Citation: Bao, Y., Chan, Q., Kook, S., and Hawkes, E., "Spray Penetrations of Ethanol, Gasoline and Iso-Octane in an Optically Accessible Spark-Ignition Direct-Injection Engine," SAE Int. J. Fuels Lubr. 7(3):1010-1026, 2014, https://doi.org/10.4271/2014-01-9079.
Language: English

References

  1. Agarwal , A.K. Biofuels (Alcohols and Biodiesel) Applications as Fuels for Internal Combustion Engines Prog Energy Combust Sci 33 233 271 2007 10.1016/j.pecs.2006.08.003
  2. Wang , X. , Gao , J. , Jiang , D. , Huang , Z. et al. Spray Characteristics of High-Pressure Swirl Injector Fueled with Methanol and Ethanol Energy Fuels 19 2394 2401 2005 10.1007/s11708-007-0012-z
  3. Padala , S. , Kook , S. , Hawkes , E.R. Effect of Ethanol and Ambient Pressure on Port-Fuel-Injection Sprays in an Optically Accessible Intake Chamber Atomization Spray 21 427 445 2011 10.1615/AtomizSpr.2011003823
  4. MacLean , H.L. , Lave , L.B. Evaluating Automobile Fuel/Propulsion System Technologies Prog Energy Combust Sci 29 1 69 2003 10.1016/S0360-1285(02)00032-1
  5. Gao , J. , Jiang , D. , Huang , Z. Spray Properties of Alternative Fuels: A Comparative Analysis of Ethanol-Gasoline Blends and Gasoline Fuel 86 1645 1650 2007 10.1016/j.fuel.2006.11.013
  6. Aleiferis , P.G. , Serras-Pereira , J. , van Romunde , Z. , Caine , J. et al. Mechanisms of Spray-Formation and Combustion from a Multi-Hole injector with E85 and Gasoline Combust Flame 157 735 756 2010 10.1016/j.combustflame.2009.12.019
  7. Drake , M.C. , Haworth , D.C. Advanced Gasoline Engine Development using Optical Diagnostics and Numerical Modeling Proc Combust Inst 31 99 124 2007 10.1016/j.proci.2006.08.120
  8. Zhao , F. , Lai , M.-C. , Harrington , D.L. Automotive Spark- Ignition Direct-Injection Gasoline Engines Prog Energy Combus Sci 25 437 562 1999 10.1016/S0360-1285(99)00004-0
  9. Van Romunde , Z. Factors Affecting the Development of Sprays Produced by Multihole Injectors for Direct-Injection Engine Applications Ph.D. thesis Department of Mechanical Engineering, University College London London 2011
  10. Aleiferis , P.G. , van Romunde , Z. An Analysis of Spray Development with Iso-octane, N-pentane, Gasoline, Ethanol and N-butanol from a Multi-Hole Injector under Hot Fuel Conditions Fuel 105 143 168 2013 10.1016/j.fuel.2012.07.044
  11. Mitroglou , N. , Nouri , J.M. , Gavaises , M. , Arcoumanis , C. Spray Characteristics of a Multi-Hole Injector for Direct-Injection Gasoline Engines Int J Engine Res 7 255 270 2006 10.1243/146808705X62922
  12. Mitroglou , N. , Nouri , J. , Yan , Y. , Gavaises , M. et al. Spray Structure Generated by Multi-Hole Injectors for Gasoline Direct-Injection Engines SAE Technical Paper 2007-01-1417 2007 10.4271/2007-01-1417
  13. Matsumoto , A. , Moore , W. , Lai , M. , Zheng , Y. et al. Spray Characterization of Ethanol Gasoline Blends and Comparison to a CFD Model for a Gasoline Direct Injector SAE Int. J. Engines 3 1 402 425 2010 10.4271/2010-01-0601
  14. Matsumoto , A. , Xie , X. , Zheng , Y. , Lai , M. et al. Direct Injection Multi-Hole Spray and Mixing Characterization of Ethanol Gasoline Blends in Engines ILASS Americas, 22nd Annual Conference on Liquid Atomization and Spray System USA May 2010
  15. Zeng , W. , Xu , M. , Zhang , M. , Zhang , Y. et al. Characterization of Methanol and Ethanol Sprays from Different DI Injectors by Using Mie-scattering and Laser Induced Fluorescence at Potential Engine Cold-start Conditions SAE Technical Paper 2010-01-0602 2010 10.4271/2010-01-0602
  16. Fan , Q. , Li , L. , Hu , Z. , Deng , J. et al. Spray Characteristics of Ethanol-Gasoline Blends from an Asymmetric Multi-Hole Injector of DISI Engines 2011 International Conference on Electric Information and Control Engineering (ICEICE) China April 15 17 2011
  17. Chan , Q.N. , Bao , Y. , Kook , S. Effects of Injection Pressure on the Structural Transformation of Flash-Boiling Sprays of Gasoline and Ethanol in a Spark-Ignition Direct-Injection (SIDI) Engine Fuel 130 228 240 2014 10.1016/j.fuel.2014.04.015
  18. Hiroyasu , H. and Arai , M. Structures of Fuel Sprays in Diesel Engines SAE Technical Paper 900475 1990 10.4271/900475
  19. Hiroyasu , H. , Arai , M. , and Tabata , M. Empirical Equations for the Sauter Mean Diameter of a Diesel Spray SAE Technical Paper 890464 1989 10.4271/890464
  20. Chan , Q.N. , Medwell , P.R. , Kalt , P.A.M. , Alwahabi , Z.T. et al. Solvent Effects on Two-Line Atomic Fluorescence of Indium App.Opt 49 1257 1266 2010 10.1364/AO.49.001257
  21. Allocca , L. , Alfuso , S. , Marchitto , L. , Valentino , G. GDI Multi-Hole Injector: Particle Size and Velocity Distribution for Single and Jet-to-Jet Evolution Analysis ICLASS 2009: 11th Triennial International Annual Conference on Liquid Atomization and Spray Systems USA July 2009
  22. Naber , J. and Siebers , D. Effects of Gas Density and Vaporization on Penetration and Dispersion of Diesel Sprays SAE Technical Paper 960034 1996 10.4271/960034
  23. Zeng , W. , Xu , M. , Zhang , M. , Zhang , Y. et al. Macroscopic Characteristics for Direct-Injection Multi-Hole Sprays using Dimensionless Analysis Exp Therm Fluid Sci 40 81 92 2012 10.1016/j.expthermflusci.2012.02.003
  24. Sellens , R. Liquid Particle Size Measurement Technique 2 nd ASTM International 9780803114593 193 208 1990
  25. Ortmann , R. , Arndt , S. , Raimann , J. , Grzeszik , R. et al. Methods and Analysis of Fuel Injection, Mixture Preparation and Charge Stratification in Different Direct Injected SI Engines SAE Technical Paper 2001-01-0970 2001 10.4271/2001-01-0970

Cited By