Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

A Feed-Forward Approach for the Real-Time Estimation and Control of MFB50 and SOI In Diesel Engines

Journal Article
2014-01-9046
ISSN: 1946-3936, e-ISSN: 1946-3944
DOI: https://doi.org/10.4271/2014-01-9046
Published May 05, 2014 by SAE International in United States
A Feed-Forward Approach for the Real-Time Estimation and Control of MFB50 and SOI In Diesel Engines
Sector:
Citation: Finesso, R. and Spessa, E., "A Feed-Forward Approach for the Real-Time Estimation and Control of MFB50 and SOI In Diesel Engines," SAE Int. J. Engines 7(1):528-549, 2014, https://doi.org/10.4271/2014-01-9046.
Language: English

References

  1. Guido C. , Beatrice C. , Di Iorio S. , Napolitano P. et al. Assessment of Closed-Loop Combustion Control Capability for Biodiesel Blending Detection and Combustion Impact Mitigation for an Euro5 Automotive Diesel Engine SAE Technical Paper 2011-01-1193 2011 10.4271/2011-01-1193
  2. Chung J. , Oh S. , Min K. , Sunwoo M. , Real-time combustion parameter estimation algorithm for light-duty diesel engines using in-cylinder pressure measurement Applied Thermal Engineering 60 33 43 2013 10.4271/2009-01-1318
  3. Asad U. , Zheng M. , Fast heat release characterization of a diesel engine International Journal of Thermal Sciences 47 1688 1700 2008 10.1016/j.ijthermalsci.2008.01.009
  4. Ponti F. , Ravaglioli V. , Moro D. , Serra G. , MFB50 on-board estimation methodology for combustion control Control Engineering Practice 2013 10.1016/j.conengprac.2013.05.001
  5. Ponti F. , Ravaglioli V. , Serra G. , and Stola F. , Instantaneous Engine Speed Measurement and Processing for MFB50 Evaluation SAE Int. J. Engines 2 2 235 244 2010 10.4271/2009-01-2747
  6. Ponti F. , Ravaglioli V. , Moro D. , Serra G. , Combustion control using a model-based MFB50 estimation methodology Proceedings of the 6th IFAC symposium advances in automotive control Munich 2010 10.3182/20100712-3-DE-2013.00122
  7. Ponti F. , Corti E. , Serra G. , and De Cesare M. , Common Rail Multi-Jet Diesel Engine Combustion Model Development for Control Purposes SAE Technical Paper 2007-01-0383 2007 10.4271/2007-01-0383
  8. Ravaglioli V. , Moro D. , Serra G. , and Ponti F. , MFB50 On-Board Evaluation Based on a Zero-Dimensional ROHR Model SAE Technical Paper 2011-01-1420 2011 10.4271/2011-01-1420
  9. Catania A.E. , Finesso R. , Spessa E. , Predictive Zero-Dimensional Combustion Model for DI Diesel Engine Feed-Forward Control Energy Conversion and Management 52 10 3159 3175 2011 10.1016/j.enconman.2011.05.003
  10. Catania A. , Finesso R. , Spessa E. , Catanese A. et al. Combustion Prediction by a Low-Throughput Model in Modern Diesel Engines SAE Int. J. Engines 4 1 2106 2123 2011 10.4271/2011-01-1410
  11. Catania A.E. , Finesso R. , Spessa E. Assessment of a Low-Throughput Predictive Model for Indicated Cycle, Combustion Noise and NOx Calculation in Diesel Engines in Steady-State and Transient Operations Proceedings of the ASME 2012 Internal Combustion Engine Division Spring Technical Conference, ICES2012 May 6-9 2012 Torino, Piemonte, Italy 10.1115/ICES2012-81094
  12. Baratta , M. , Finesso , R. , Kheshtinejad , H. , Misul D. et al. Use of an Innovative Predictive Heat Release Model Combined to a 1D Fluid-Dynamic Model for the Simulation of a Heavy Duty Diesel Engine SAE Int. J. Engines 6 3 1566 1579 2013 10.4271/2013-24-0012
  13. Catania , A. , Finesso , R. , and Spessa , E. , Real-Time Calculation of EGR Rate and Intake Charge Oxygen Concentration for Misfire Detection in Diesel Engines SAE Technical Paper 2011-24-0149 2011 10.4271/2011-24-0149
  14. Finesso , R. and Spessa , E. , Real-Time Predictive Modeling of Combustion and NOx Formation in Diesel Engines Under Transient Conditions SAE Technical Paper 2012-01-0899 2012 10.4271/2012-01-0899
  15. Hillion , M. , Buhlbuck , H. , Chauvin , J. , and Petit , N. , Combustion Control of Diesel Engines Using Injection Timing SAE Technical Paper 2009-01-0367 2009 10.4271/2009-01-0367
  16. Heywood , J.B. Internal Combustion Engine Fundamentals McGraw-Hill Intern. Editions 1988
  17. Arrègle , J. , García , J.M. , López , J.J. , Fenollosa , C. , Development of a zero-dimensional Diesel combustion model. Part 1: Analysis of the quasi-steady diffusion combustion phase Applied Thermal Engineering. 23 11 1301 1317 2003 10.1016/S1359-4311(03)00079-6
  18. Arrègle , J. , García , J.M. , López , J.J. , Fenollosa , C. , Development of a zero-dimensional Diesel combustion model. Part 2: Analysis of the transient initial and final diffusion combustion phases Applied Thermal Engineering. 23 11 1319 1331 2003 10.1016/S1359-4311(03)00080-2
  19. Chmela , F. and Orthaber , G. , Rate of Heat Release Prediction for Direct Injection Diesel Engines Based on Purely Mixing Controlled Combustion SAE Technical Paper 1999-01-0186 1999 10.4271/1999-01-0186
  20. Egnell , R. , A Simple Approach to Studying the Relation between Fuel Rate Heat Release Rate and NO Formation in Diesel Engines SAE Technical Paper 1999-01-3548 1999 10.4271/1999-01-3548
  21. Ryan , T. and Callahan , T. , Homogeneous Charge Compression Ignition of Diesel Fuel SAE Technical Paper 961160 1996 10.4271/961160
  22. Ericson , C. , Westerberg , B. , Andersson , M. , and Egnell , R. , Modelling Diesel Engine Combustion and NOx Formation for Model Based Control and Simulation of Engine and Exhaust Aftertreatment Systems SAE Technical Paper 2006-01-0687 2006 10.4271/2006-01-0687
  23. Grahn , M. , Olssonm , J.O. , McKelvey , T. , A Diesel Engine Model for Dynamic Drive Cycle Simulations 18th IFAC World Congress Milano (Italy) August 28 September 2 2011 10.3182/20110828-6-IT-1002.03541
  24. Tauzia , X. , Maiboom , A. , Chesse , P. , Thouvenel , N. , A new phenomenological heat release model for thermodynamical simulation of modern turbocharged heavy duty Diesel engines Applied Thermal Engineering 26 1851 1857 2006 10.1016/j.applthermaleng.2006.02.009
  25. Catania , A. , d'Ambrosio , S. , Ferrari , A. , Finesso , R. et al. Experimental Analysis of Combustion Processes and Emissions in a 2.0L Multi-Cylinder Diesel Engine Featuring a New Generation Piezo-Driven Injector SAE Technical Paper 2009-24-0040 2009 10.4271/2009-24-0040
  26. Catania , A. , d'Ambrosio , S. , Finesso , R. , Spessa , E. et al. Combustion System Optimization of a Low Compression-Ratio PCCI Diesel Engine for Light-Duty Application SAE Int. J. Engines 2 1 1314 1326 2009 10.4271/2009-01-1464
  27. Catania , A.E. , Ferrari A. , Spessa E. Numerical-Experimental Study and Solutions to Reduce the Dwell Time Threshold for Fusion-Free Consecutive Injections in a Multijet Solenoid-Type C.R. System Journal of Engineering for Gas Turbines and Power 131 1 2009 10.1115/1.2938394
  28. Finesso , R. , Spessa , E. , Ignition delay prediction of multiple injections in diesel engines Fuel 119 1 170 190 2014 10.1016/j.fuel.2013.11.040
  29. Catania , A.E. , Misul , D. , Spessa , E. , and Vassallo , A. , A New Quasi-Dimensional Multizone Combustion Diagnostic Model for the Analysis of Heat-Release, Flame Propagation Parameters and Nitric Oxide Formation in SI Engines COMODIA 2004 Yokohama, Japan 2004
  30. Baratta M. , Catania A.E. , Ferrari A. , Finesso R. , Spessa E. Premixed-Diffusive Multizone Model for Combustion Diagnostics in Conventional and PCCI Diesel Engines Journal of Engineering for Gas Turbines and Power 133 10 2011 10.1115/1.4003048
  31. Klein , P. , Grüter , R. , and Loffeld , O. , Real-Time Estimation of the Exhaust Gas Recirculation Ratio Based on Cylinder Pressure Signals SAE Technical Paper 2007-01-0493 2007 10.4271/2007-01-0493
  32. Finesso , R. and Spessa , E. , Analysis of Combustion and Emissions in a EURO V Diesel Engine by Means of a Refined Quasi-Dimensional Multizone Diagnostic Model SAE Int. J. Engines 5 3 886 908 2012 10.4271/2012-01-1066
  33. Dec , J. , A Conceptual Model of DI Diesel Combustion Based on Laser-Sheet Imaging SAE Technical Paper 970873 1997 10.4271/970873
  34. ISO/IEC GUIDE 98-3:2008(E)
  35. Rocco , V. , Dynamic T.D.C. and Thermodynamic Loss Angle Measurement in a D. I. Diesel Engine SAE Technical Paper 851546 1985 10.4271/851546

Cited By