This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Study on Parameters of Friction between Seats the Valve and its Insert using Fractal Model
Technical Paper
2014-01-2876
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The scope of the study is limited to the period of closing valve, but phenomena existing in the antecedent phase influence conditions in the contact between seats. Friction type in such contact varies from mixed to boundary or even dry one, depending on the amount of oil and wear debris wherein. The operational conditions for inlet and outlet valve are different because of temperature in contact and deposition of carbon deposits. The complexity the phenomena in contact zone, including valve rotation makes difficult the modeling of friction. The valve rotation is considered only in macro scale and the other displacements of seats in micro and macro scale. The initial shape of seats resulted from grinding and lapping process varies during impacting and abrasion wear. The aim of the studies is to obtain courses of friction force between seats, as a function of engine speed and load, duration of wear process, for some material association of valve and its insert in conditions of dry and boundary friction. The elaborated models of friction between the seats use fractal and statistical models of roughness the mating surfaces. It is used the geometry of the valve and its seat insert from the selected engine. The dynamic of valve motion and heat transfer between valve head and its seat insert has been modeled using the FEM. The values of dry friction coefficient have been estimated during earlier tests of samples made of the valve material and counterparts made of material the seat insert.
Recommended Content
Authors
Citation
Siczek, K. and Stefanski, A., "Study on Parameters of Friction between Seats the Valve and its Insert using Fractal Model," SAE Technical Paper 2014-01-2876, 2014, https://doi.org/10.4271/2014-01-2876.Also In
References
- Refalo , K. , Bowyer , S. , Smith , M. , and Hijawi , M. Optimizing Valve Rotational Speed Using Taguchi Techniques SAE Technical Paper 2010-01-1096 2010 10.4271/2010-01-1096
- Dojoong , Kim , Jongwon , Lee , Junghee , Lee Effect of Valve Train Design Parameters on Valve Rotation Performance of a Diesel Engine SAE Technical Paper F2004V281 2004
- Jelenschi , L. , Cofaru , C. , Sandu , G. , Aleontem M. State of the Art of Engine Valve and Tappet Rotation Bulletin of the Transilvania University of Braşov, Series I 4 53 2011
- Lewis , R. , Dwyer-Joyce , R. Automotive Engine Valve Recession Willey 2001 978-1-86058-358-2
- Blau , P. J. 1. A Wear Model for Diesel Engine Exhaust Valve November 24 2009 ORNL/TM-2009/259
- Siczek , K. Researches and modeling of tribological phenomena occurring in the seat insert - lightweight valve - guide system for valvetrains of internal combustion engines Scientific Bulletin of the Lodz University of Technology 1138 439 2012 0137-4834
- Calabretta , M. , Cacciatore , D. , Carden , P. Valvetrain Friction - Modeling, Analysis and Measurement of a High Performance Engine Valvetrain System 2010 http://ricardo.com/Documents/Downloads/Software%20Flyers/Conference%20Info/EUC%202011/Presentations/Lamborghini_VALDYN_Valvetrain_Friction.pdf
- Taraza , D. , Heinen , N. A. , Teodorescu , M. , Ceausu , R. , Bryzic , W. Dynamics and Friction of Valve Trains ARC Annual Meeting May 25 26 1999 University of Michigan http://arc.engin.umich.edu/events/archive/annual/conf99/taraza.pdf
- Roshan , R. , Priest , M. , Neville , A. , Morina , A. , Xia , X. , Green , J. H. , Warrens , C. P. , Payne , M. J. Friction modelling in an engine valve train considering the sensitivity to lubricant formulation Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology March 1 2009 223 3 413 424 10.1243/13506501JET540
- Gangopadhyay , A. , McWatt , D. G. , Zdrodowski , R. J. , Simko , S. J. , Matera , S. , Sheffer , K. , Furby , R. S. Valvetrain Friction Reduction through Thin Film Coatings and Polishing Tribology Transactions 55 99 108 2012
- Raghuwanshi , N. K. , Pandey , A. , Mandloi , R.K. Failure Analysis of Internal Combustion Engine Valves: A Review International Journal of Innovative Research in Science, Engineering and Technology 1 2 December 2012 173 181 2319-8753
- Erite , M. , Polycarpou , A. A. , Bergman , L. A. Physics-based modeling for fretting behavior of nominally flat rough surfaces International Journal of Solids and Structures 48 2011 1436 1450
- Truster , T., J. , Eriten , M. , Polycarpou , A., A. , Bergman , L.,A. , Masud , A. Stabilized interface methods for mechanical joints: Physics-based models and variationally consistent embedding International Journal of Solids and Structures 50 14-15 July 2013 2132 2150
- Liou , J., L. , Tsai , C., M. , Lin , J., F. A microcontact model developed for sphere- and cylinder-based fractal bodies in contact with a rigid flat surface Wear 268 2010 431 442
- Ji , Cuicui , Zhu , Hua , Jiang , Wei Fractal Prediction Model of Thermal Contact Conductance of Rough Surfaces Chinese Journal of Mechanical Engineering 26 1 2013 128 136
- Braunovic , M. , Konchits , V., V , Myshin , N. Electrical Contacts. Fundamentals, Applications and Technology CRC Press Taylor&Francis Group 2006 672
- Carbone , G. , Bottiglione , F. Asperity contact theories: Do they predict linearity between contact area and load? J. Mech. Phys. Solids 56 2008 2555 2572
- Liou , J., L. , Lin , J., F. , A modified fractal microcontact model developed for asperity heights with variable morphology parameters Wear 268 2010 133 144
- Eriten , M. Multiscale Physics Based Modeling of Friction University of Illinois Urbana-Champaign 2012
- Kogut , L. , Etsion , I. 2003 A Semi-Analytical Solution for the Sliding Inception of a Spherical Contact ASME Journal of Tribology 125 499 506
- Eriten , M. , Polycarpou , A., A. , Bergman , L., A. , Physics-based modeling for partial slip behavior of spherical contacts International Journal of Solids and Structures 47 18-19 September 2010 2554 2567
- Onescu , C. , Popa , N. , Vieru , I. The Influence of the Cam Profile Design on the Cam and Tappet Hertz Stresses and Wear 50-th Aniversary of the Faculty of Technical Science Nove Sady May 2010 87 90
- Guo , J. , Zhang , W. , Zon , D. Investigation of dynamic characteristics of valve train system Mechanism and Machine Theory 46 2011 1950 1969
- ANSYS Documentation
- Thundil Karuppa Raj , R. , Manimaran , R. Effect of Swirl in a Constant Speed DI Diesel Engine using Computational Fluid Dynamics Karuppa & Manimaran CFD Letters 4 4 2012 214