Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Particle Number Emissions Reduction Using Multiple Injection Strategies in a Boosted Spark-Ignition Direct-Injection (SIDI) Gasoline Engine

Journal Article
2014-01-2845
ISSN: 1946-3936, e-ISSN: 1946-3944
DOI: https://doi.org/10.4271/2014-01-2845
Published October 13, 2014 by SAE International in United States
Particle Number Emissions Reduction Using Multiple Injection Strategies in a Boosted Spark-Ignition Direct-Injection (SIDI) Gasoline Engine
Sector:
Citation: Su, J., Xu, M., Yin, P., Gao, Y. et al., "Particle Number Emissions Reduction Using Multiple Injection Strategies in a Boosted Spark-Ignition Direct-Injection (SIDI) Gasoline Engine," SAE Int. J. Engines 8(1):20-29, 2015, https://doi.org/10.4271/2014-01-2845.
Language: English

References

  1. Lecointe , B. and Monnier , G. Downsizing a Gasoline Engine Using Turbocharging with Direct Injection SAE Technical Paper 2003-01-0542 2003 10.4271/2003-01-0542
  2. Zaccardi , J. , Pagot , A. , Vangraefschepe , F. , Dognin , C. et al. Optimal Design for a Highly Downsized Gasoline Engine SAE Technical Paper 2009-01-1794 2009 10.4271/2009-01-1794
  3. Petitjean , D. , Bernardini , L. , Middlemass , C. , and Shahed , S. Advanced Gasoline Engine Turbocharging Technology for Fuel Economy Improvements SAE Technical Paper 2004-01-0988 2004 10.4271/2004-01-0988
  4. Schmuck-Soldan , S. , Koenigstein , A. and Westin , F. Two-Stage Boosting of Spark Ignition Engines 32.Internationales Wiener Motoren symposium Vienna, Germany May 5 6 2011
  5. Alger , T. , Gingrich , J. , Roberts , C. and Mangold , B. Cooled Exhaust-Gas Recirculation for Fuel Economy and Emissions Improvement in Gasoline Engines Int. J. Engine Res. 12 3 252 264 2011 10.1177/1468087411402442
  6. Lee , J. W. , Jeong , Y. I. , Jung , M. W. , Cha , K. O. et al. Experimental Investigation and Comparison of Nanoparticle Emission Characteristics in Light-Duty Vehicles for Two Different Fuels Int. J. Automot Technol. 9 4 397 403 2008 10.1007/s12239-008-0048-z
  7. Piock , W. , Hoffmann , G. , Berndorfer , A. , Salemi , P. et al. Strategies Towards Meeting Future Particulate Matter Emission Requirements in Homogeneous Gasoline Direct Injection Engines SAE Int. J. Engines 4 1 1455 1468 2011 10.4271/2011-01-1212
  8. Whitaker , P. , Kapus , P. , Ogris , M. , and Hollerer , P. Measures to Reduce Particulate Emissions from Gasoline DI engines SAE Int. J. Engines 4 1 1498 1512 2011 10.4271/2011-01-1219
  9. Choi , K. , Kim , J. , Myung , C. L. , Lee , M. et al. Effect of the Mixture Preparation on the Nanoparticle Characteristics of Gasoline Direct-Injection Vehicles Proc. IMechE. Part D: J. Automobile Engineering 0 0 1 11 2012 10.1177/0954407012445534
  10. Krzyzanowski , M. , Kuna-Dibbert , B. and Schneider , J. Health Effects of Transport-Related Air Pollution World Health Organization 190 2005
  11. Kunzli , N. , Kaiser , R. , Medina , S. , Studnicka , M. et al. Public-Health Impact of Outdoor and Traffic-Related Air Pollution: a European Assessment Lancet 356 9232 795 801 2000
  12. Sabathil , D. , Koenigstein , A. , Schaffner , P. , Fritzsche , J. et al. The Influence of DISI Engine Operating Parameters on Particle Number Emissions SAE Technical Paper 2011-01-0143 2011 10.4271/2011-01-0143
  13. ACEA comments to Commission proposal for Euro 6 OBD and Euro 6 PN limit for gasoline direct injection engines http://circa.europa.eu/Public/irc/enterprise/automotive/library?l=/mveg_vehicle_emissions/110th_october_2011/111011_circapdf/_EN_1.0_&a=d Nov 2 2011
  14. Xu , Z. , Yi , J. , Wooldridge , S. , Reiche , D. et al. Modeling the Cold Start of the Ford 3.5L V6 EcoBoost Engine SAE Int. J. Engines 2 1 1367 1387 2009 10.4271/2009-01-1493
  15. Lohfink , C. , Baecker , H. , and Tichy , M. Experimental Investigation on Catalyst-Heating Strategies and Potential of GDI Combustion Systems SAE Technical Paper 2008-01-2517 2008 10.4271/2008-01-2517
  16. Yang , J. and Anderson , R. Fuel Injection Strategies to Increase Full-Load Torque Output of a Direct-Injection SI Engine SAE Technical Paper 980495 1998 10.4271/980495
  17. Oh , H. , Bae , C. , Park , J. , and Jeon , J. Effect of the Multiple Injection on Stratified Combustion Characteristics in a Spray-Guided DISI Engine SAE Technical Paper 2011-24-0059 2011 10.4271/2011-24-0059
  18. Bonandrini , G. , Di Gioia , R. , Papaleo , D. , and Venturoli , L. Numerical Study on Multiple Injection Strategies in DISI Engines for Particulate Emission Control SAE Technical Paper 2012-01-0400 2012 10.4271/2012-01-0400
  19. Ntziachristos , L. , Amanatidis , S. , Samaras , Z. , Giechaskiel , B. et al. Use of a Catalytic Stripper as an Alternative to the Original PMP Measurement Protocol SAE Int. J. Fuels Lubr. 6 2 532 541 2013 10.4271/2013-01-1563
  20. Wei , Q. , Oestergaard , K. , Porter , S. , Ichiro , A. et al. Real-Time Measuring System for Engine Exhaust Solid Particle Number Emission - Design and Performance SAE Technical Paper 2006-01-0864 2006 10.4271/2006-01-0864
  21. O'Rourke , P. J. Collective Drop Effects on Vaporizing Liquid Sprays PhD Thesis Princeton University 1981
  22. O'Rourke , P. and Amsden , A. A Spray/Wall Interaction Submodel for the KIVA-3 Wall Film Model SAE Technical Paper 2000-01-0271 2000 10.4271/2000-01-0271
  23. Su , J. , Xu , M. , Li , T. , Gao , Y. et al. Combined Effects of Cooled EGR and a Higher Geometric Compression Ratio on Thermal Efficiency Improvement of a Downsized Boosted Spark-Ignition Direct-Injection Engine Energy Convers Manage 78 65 73 2013 10.1016/j.enconman.2013.10.041

Cited By

Recommended Content

Technical Paper Effect of Injection Strategies on Emissions from a Pilot-Ignited Direct-Injection Natural-Gas Engine- Part II: Slightly Premixed Combustion
Journal Article Key Fuel Injection System Features for Efficiency Improvement in Future Diesel Passenger Cars
Journal Article Conventional and Low Temperature Combustion Using Naphtha Fuels in a Multi-Cylinder Heavy-Duty Diesel Engine