This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Studying on Fuel Injection Strategies on the Performance of Two-Stroke Marine Diesel Engine
Technical Paper
2014-01-2706
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Emission reduction and efficiency increase of two-stroke marine diesel engine depends on fuel injection, which affects in-cylinder combustion. This paper presents injection strategies varied results from simulation based on AVL BOOST and the experimental results and its validity was confirmed by actual measurements in a two-stroke engine during shop testing, which reveals the affect on performance and emission, as well as the corresponding concept analysis. This simulation enabled a more thorough investigation into engine performance features. In particular it provided a detailed examination of how changes in injection strategies impacted the combustion and ultimately engine performance. These results are summarized and based on these results, optimal injection strategies settings are suggested for balancing engine performance and NOx emissions.
Authors
Topic
Citation
Liu, H., Lu, L., and Wang, Z., "Studying on Fuel Injection Strategies on the Performance of Two-Stroke Marine Diesel Engine," SAE Technical Paper 2014-01-2706, 2014, https://doi.org/10.4271/2014-01-2706.Also In
References
- IMO. NOx Technical Code 2008 Technical Code on Control of Emission of Nitrogen Oxides from Marine Diesel Engines MEPC 58/23/Add.1, ANNEX 14
- Marine Diesel Engine NOx Emission Testing and Inspection Guide CCS 2012
- Ishikawa , N. , Uekusa , T. , Nakada , T. , and Hariyoshi , R. DI Diesel Emission Control by Optimized Fuel Injection SAE Technical Paper 2004-01-0117 2004 10.4271/2004-01-0117
- Benajes , J. , Molina , S. , and García , J. Influence of Pre-and Post-Injection on the Performance and Pollutant Emissions in a HD Diesel Engine SAE Technical Paper 2001-01-0526 2001 10.4271/2001-01-0526
- Payri , F. , Benajes , J. , Pastor , J. , and Molina , S. Influence of the Post-Injection Pattern on Performance, Soot and NOx Emissions in a HD Diesel Engine SAE Technical Paper 2002-01-0502 2002 10.4271/2002-01-0502
- Han , Z. , Uludogan , A. , Hampson , G. , and Reitz , R. Mechanism of Soot and NOx Emission Reduction Using Multiple-injection in a Diesel Engine SAE Technical Paper 960633 1996 10.4271/960633
- Andreadis , P. , Chryssakis , C. , and Kaiktsis , L. Optimization of Injection Characteristics in a Large Marine Diesel Engine Using Evolutionary Algorithms SAE Technical Paper 2009-01-1448 2009 10.4271/2009-01-1448
- Bergman , M. and Golovitchev , V. Application of Transient Temperature vs. Equivalence Ratio Emission Maps to Engine Simulations SAE Technical Paper 2007-01-1086 2007 10.4271/2007-01-1086
- Kamimoto , T. and Bae , M. High Combustion Temperature for the Reduction of Particulate in Diesel Engines SAE Technical Paper 880423 1988 10.4271/880423
- Chryssakis C.A. , Hagena J.R. , Knafl A. etc. In-Cylinder Reduction of PM and NOx Emissions from Diesel Combustion with Advanced Injection Strategies Journal International Journal of Vehicle Design 41 1-4 2006 83 102
- Sun P.T. Marine Diesel Engine[M] Dalian Dalian Maritime University Press 2008
- Sheng Z. B and Liu Y. Z. Ship Principle[M] Shanghai Shanghai Jiaotong University Press 2004
- Liu H. Q. , and Lu L. Research on Calculation Platform for Matching Design of Screw Propeller and Diesel Engine[J] SHIP & OCEAN ENGINEERING 2008 03 56 58
- Kontoulis P. , Chryssakis C. , Kaiktsis L. Evaluation of Pilot Injections in a Large Two-Stroke Marine Diesel Engine, Using CFD and T-φ Mapping COMODIA 2008 Sapporo, Japan July 2008
- Chryssakis Christos A. , Assanis Dennis N. Effect of Multiple Injections on Fuel-Air Mixing and Soot Formation in Diesel Combustion Using Direct Flame Visualization and CFD Techniques ASME Internal Combustion Engine Division 2005 Spring Technical Conference April 5 7 2005
- Lechner , G. , Jacobs , T. , Chryssakis , C. , Assanis , D. et al. Evaluation of a Narrow Spray Cone Angle, Advanced Injection Timing Strategy to Achieve Partially Premixed Compression Ignition Combustion in a Diesel Engine SAE Technical Paper 2005-01-0167 2005 10.4271/2005-01-0167