This content is not included in your SAE MOBILUS subscription, or you are not logged in.
Combined Effects of Multi-Pulse Transient Plasma Ignition and Intake Heating on Lean Limits of Well-Mixed E85 DISI Engine Operation
ISSN: 1946-3936, e-ISSN: 1946-3944
Published October 13, 2014 by SAE International in United States
Citation: Sjöberg, M., Zeng, W., Singleton, D., Sanders, J. et al., "Combined Effects of Multi-Pulse Transient Plasma Ignition and Intake Heating on Lean Limits of Well-Mixed E85 DISI Engine Operation," SAE Int. J. Engines 7(4):1781-1801, 2014, https://doi.org/10.4271/2014-01-2615.
Well-mixed lean SI engine operation can provide improvements of the fuel economy relative to that of traditional well-mixed stoichiometric SI operation. This work examines the use of two methods for improving the stability of lean operation, namely multi-pulse transient plasma ignition and intake air preheating. These two methods are compared to standard SI operation using a conventional high-energy inductive ignition system without intake air preheating. E85 is the fuel chosen for this study.
The multi-pulse transient plasma ignition system utilizes custom electronics to generate 10 kHz bursts of 10 ultra-short (12ns), high-amplitude pulses (200 A). These pulses were applied to a custom spark plug with a semi-open ignition cavity. High-speed imaging reveals that ignition in this cavity generates a turbulent jet-like early flame spread that speeds up the transition from ignition to the main combustion event.
Performance testing shows that lean operation with heated intake air enables a 17% improvement of fuel economy at ϕ = 0.59 for both ignition systems, relative to that of stoichiometric operation. Moreover, multi-pulse transient plasma ignition offers more stable ultra-lean operation, with IMEPn variability less than 5% down to ϕ = 0.49. The ability to operate stably at such lean conditions is attributed to a more stable flame initiation offered by both the increased charge temperature and the multi-pulse transient plasma ignition that allows a later spark timing due to the very fast transition to fully turbulent deflagration.
|Journal Article||Stabilization of Highly Diluted Gasoline Direct Injection Engine using Innovative Ignition Systems|
|Technical Paper||Effects of Swirl/Tumble Motion on In-Cylinder Mixture Formation in a Lean-Burn Engine|