This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
CFD Model of the Mixture Formation Process of the CNG Direct Injection Engine
Technical Paper
2014-01-2575
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The article presents results of the 3D-CFD modeling of mixture creation process in the cylinder of diesel engine. The simulation was performed using the AVL Fire software. Based on the geometry of the ADCR engine, produced by Andoria-Mot Company, a 3D-CFD model of combustion chamber, channels in the engine head and CNG injector nozzle were created. This model prevented the simulation of the filling, compression and mixture creation process. Specially prepared CNG injector has been placed in the socket of the glow plug, to minimize interference with the structure of the engine. With this solution full functionality of the original fuel supply system was retained with the ability to work with one or two fuels. During studies the location of the gas injector nozzle was changed. The results of simulation are presented for three variants of CNG injector locations. Simulation studies prevented the determination of the degree of stratification and the distribution of fuel in the cylinder of the engine. Influence of the injector nozzle position on the air-fuel stratification in the cylinder was demonstrated. The characteristics of the fuel mass in piston bowl and the rest part of the cylinder were also analyzed. As a result of the simulation, the optimal position of the injector nozzle was presented.
Authors
Topic
Citation
Bialy, M., Wendeker, M., Magryta, P., Czyz, Z. et al., "CFD Model of the Mixture Formation Process of the CNG Direct Injection Engine," SAE Technical Paper 2014-01-2575, 2014, https://doi.org/10.4271/2014-01-2575.Also In
References
- Harrington , J. , Munshi , S. , Nedelcu , C. , Ouellette , P. et al. Direct Injection of Natural Gas in a Heavy-Duty Diesel Engine SAE Technical Paper 2002-01-1630 2002 10.4271/2002-01-1630
- Liu J. , Yang F. , Wang H. Ouyang M. , Hao S. Effects of pilot fuel quantity on the emissions characteristics of a CNG/diesel dual fuel engine with optimized pilot injection timing Applied Energy 110 2013 Sochaczewski R. Impact of an gas injection start angle on the fuel distribution Combustion Engines 2013 154 3 414 420 0138-0346
- Pietrykowski K. , Grabowski L. , Sochaczewski R. , Wendeker M. The CFD model of the mixture formation in the Diesel dual-fuel engine Combustion Engines 2013 154 3 476 482 0138-0346
- Doppelbauer , C. , Penz , M. , Renner , D. , Masser , K. et al. DUAL FUEL - Potential of Combined Combustion of CNG and Diesel Fuel SAE Technical Paper 2013-36-0133 2013 10.4271/2013-36-0133
- www.andoria-mot.com.pl
- Taylor ch. F. The Internal-Combustion Engine in Theory and Practice: Thermodynamics, Fluid Flow, Performance Mit Pr 1985 0262700263/0-262-70026-3