Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

A Comparison between Regular and Vibration-Assisted Drilling in CFRP/Ti6Al4V Stack

Journal Article
2014-01-2236
ISSN: 1946-3979, e-ISSN: 1946-3987
DOI: https://doi.org/10.4271/2014-01-2236
Published September 16, 2014 by SAE International in United States
A Comparison between Regular and Vibration-Assisted Drilling in CFRP/Ti6Al4V Stack
Sector:
Citation: Lonfier, J. and De Castelbajac, C., "A Comparison between Regular and Vibration-Assisted Drilling in CFRP/Ti6Al4V Stack," SAE Int. J. Mater. Manf. 8(1):18-26, 2015, https://doi.org/10.4271/2014-01-2236.
Language: English

References

  1. Rech , J. Contribution à la compréhension des modes d'actions tribologiques et thermiques des revêtements en usinage -Application au cas du taillage de dentures à la fraise-mère à grande vitesse Arts et Métiers ParisTech 2002
  2. Guibert , N. Etude et modélisation de l'influence des phénomènes de coupe sur les performances du forage vibratoire Laboratoire G-SCOP and LTDS, Centre de Saint Etienne 2008
  3. Brinksmeler , E. , Janssen , R. Drilling of multi-layer composite materials consisting of carbon fiber reinforced plastics (CFRP), Titanium and aluminum alloys Faculty of production technology, Division of manufacturing processes 10.1016/S0007-8506(07)61472-3
  4. Bohrer, Senker, Reibahlen, Gewindebohrer, Gewindeschneideisen DIN-Taschenbuch 6, DIN 1412 111 112 1991
  5. Bonnet , C. Comprehensive study of cutting phenomena for Titanium alloys Ti6Al4V and CFRP stacks drilling in dry condition Arts et Métiers ParisTech, Centre de Cluny 2010
  6. Denkena , B. , Boehnke , D. , Dege , J. H. Helical milling of CFRP-titanium layer compounds CIRP J. Manuf. Sci. Technol. 1 2 64 69 Jan. 2008 10.1016/j.cirpj.2008.09.009
  7. coromant Sandvik Guide pratique de production de trous 2006
  8. coromant Sandvik Drilling Techniques de l'ingenieur, Traité du travail des matériaux et assemblages 2001
  9. Neugebauer , R. , Stoll , A. Ultrasonic application in drilling J. Mater. Process. Technol. 149 1-3 633 639 Jun. 2004 10.1016/j.jmatprotec.2003.10.062
  10. Chang , S. F. , Bone , G. M. Burr size reduction in drilling by ultrasonic assistance Robotics and computer-integrated manufacturing 21 442 450 2005 10.1016/j.rcim.2004.11.005
  11. Azarhoushang , B. , Akbari , J. Ultrasonic-assisted drilling of Inconel 738-LC Int. J. Mater. Manf. 47 1027 1033 2007 10.1016/j.ijmachtools.2006.10.007
  12. Moraru , G. , Veron , P. , Rabate , P. DRILLING HEAD WITH AXIAL VIBRATIONS US 2012/0107062 A12012
  13. Toews , H. G. , Compton , W. D. , Chandrasekar , S. A study of the influence of superimposed low-frequency modulation on the drilling process Precis. Eng. 22 1-9 9 1998 10.1016/S0141-6359(97)00085-8
  14. Chhabra , P. N. , Ackroyd , B. , Compton , W. D. Low frequency modulation assisted drilling using linear drives Journal of engineering manufacture 216 321 330 2002 10.1243/0954405021519997
  15. Okamura , K. , Sasahara , H. , Segawa , T. , Tsutsumi , M. Low-Frequency Vibration Drilling of Titanium Alloy JSME Int. J. Ser. C 49 1 76 82 2006 10.1299/jsmec.49.76
  16. Utkin , T.E. Deep hole drilling Moscow 1988
  17. Peigne , G. RING-ROLLING BEARING WITH AXIAL DISPLACEMENT AND SHAPING TOOLING EQUIPPED WITH SUCH A BEARING US 2010/0003096 A12010
  18. Moraru , G. The dynamics of the machining system in vibration cutting Ecole Nationale Supérieur d'Arts et Métiers Université Polytechnique de Bucarest 2002
  19. Laporte , S. and De Castelbajac , C. Major Breakthrough in Multi Material Drilling, Using Low Frequency Axial Vibration Assistance SAE Int. J. Mater. Manf. 6 1 11 18 2013 10.4271/2012-01-1866
  20. AFNOR. NF E66-507 Basic quantities in cutting and grinding_Forces, energy, power_ Juin 1985
  21. AFNOR. NF E66-502 Géométrie de la partie active des outils coupants, Notion générales systèmes de références, angles de foret et angles en travail_ 1978
  22. AFNOR. NF E66-520-8 Working zones of cutting tools _Couple Tool Material_ Part 8: Couple tool material methodology in drilling on plain 2000

Cited By

Recommended Content

Journal Article A New Robotic Vibration-Drilling Process
Journal Article New Vibration System for Advanced Drilling Composite-Metallic Stacks
Technical Paper Prop-Fan - A High Thrust, Low Noise Propulsor