This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Meeting Challenges of Using COTS Component Thermal Data in Aerospace Application
Technical Paper
2014-01-2201
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
This article is about the issues associated with the published thermal data from commercial off the shelf (COTS) component manufacturers. Some of the published electrical component thermal data can be confusing and/or misleading. This article discusses the possibility of wrong design decisions that can be made using published COTS thermal data. There are two major issues of the published thermal data associated with the use of COTS components. One is the published ambient temperature rating. Another is the published thermal resistance. This paper will discuss these two major issues in details and provide mitigation suggestions.
Recommended Content
Authors
Citation
Wang, F., "Meeting Challenges of Using COTS Component Thermal Data in Aerospace Application," SAE Technical Paper 2014-01-2201, 2014, https://doi.org/10.4271/2014-01-2201.Also In
References
- Holman , J. P. , Heat Transfer McGraw-Hill Book Company 8th. Edition NY, NY 1997
- McQuiston , F.C. and Parker , J.D. Heating, Ventilating, and Air conditioning Analysis and Design John Wiley & Sons. 1988
- Avallone , E. A. , Baumeister III T Mark's Standard Handbook for Mechanical Engineers McGraw-Hill Book Company Ninth Edition NY, NY 1976
- MIL-STD-810F Test Method Standard for Environmental Engineering Considerations and Laboratory Tests Department of Defense Washington D.C. 2000
- MIL-STD-883G TEST METHOD STANDARD MICROCIRCUITS Department of Defense Washington D.C. 2006
- RTCA/DO-160D Environmental Conditions and Test Procedures for Airborne Equipment RTCA Washington D.C. 1997
- Wang F. , Airborne Electronics Equipment Fastener Joint Failure Study Proceedings of IEEE Eighth Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems - ITherm 2004 June 1 June 4 2004 Las Vegas, Nevada, USA
- Wang F. , Jelinek C. J. , Davis M. Physics of Failure HALT Result Assessment Proceedings of 2003 ASME International Mechanical Engineering Congress and RD&D Expo - IMECE2003-41089 November 15 - 21 2003 Washington D.C., USA
- Wang F. Modified Highly Accelerated Life Test for Aerospace Electronics Proceedings of IEEE Eighth Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems - ITherm 2002 May 29 June 1 2002 San Diego, California, USA
- Wang F. , Quilliam J. , Green J. Avionics Thermal Analysis & Testing Strategy Proceedings of Proceedings of ASME The Pacific Rim/ASME International Electronic Packaging Technical Conference and Exhibition, InterPACK 2001-15859 July 8-13 2001 Kauai, Hawaii, USA
- JESD51 Methodology for the Thermal Measurement of Component Packages (Single Semiconductor Device) Joint Electron Devices Engineering Council (JEDEC) SOLID STATE TECHNOLOGY ASSOCIATION Dec. 1995
- JESD51-2 Integrated Circuits Thermal Test Method Environmental Conditions - Natural Convection (Still Air) Joint Electron Devices Engineering Council (JEDEC) SOLID STATE TECHNOLOGY ASSOCIATION Dec. 1995
- JESD51-3 Low Effective Thermal Conductivity Test Board for Leaded Surface Mount Packages Joint Electron Devices Engineering Council (JEDEC) SOLID STATE TECHNOLOGY ASSOCIATION Aug. 1996
- JESD51-5 Extension of Thermal Test Board Standards For Packages With Direct Thermal Attachment Mechanisms Joint Electron Devices Engineering Council (JEDEC) SOLID STATE TECHNOLOGY ASSOCIATION Feb. 1996
- JESD51-6 Integrated Circuit Thermal Test Method Environmental Conditions - Forced Convection (Moving Air) Joint Electron Devices Engineering Council (JEDEC) SOLID STATE TECHNOLOGY ASSOCIATION March 1999
- JESD51-7 High Effective Thermal Conductivity Test Board for Leaded Surface Mount Packages Joint Electron Devices Engineering Council (JEDEC) SOLID STATE TECHNOLOGY ASSOCIATION Feb. 1999
- JESD51-8 Integrated Circuit Thermal Test Method Environmental Conditions - Junction-to-Board Joint Electron Devices Engineering Council (JEDEC) SOLID STATE TECHNOLOGY ASSOCIATION Oct. 1999
- JESD51-9 Test Boards for Area Array Surface Mount Package Thermal Measurements Joint Electron Devices Engineering Council (JEDEC) SOLID STATE TECHNOLOGY ASSOCIATION July 2000
- JESD51-10 Test Boards for Through-Hole Perimeter Leaded Package Thermal Measurements Joint Electron Devices Engineering Council (JEDEC) SOLID STATE TECHNOLOGY ASSOCIATION July 2000
- JESD51-11 Test Boards for Through-Hole Area Array Leaded Package Thermal Measurement Joint Electron Devices Engineering Council (JEDEC) SOLID STATE TECHNOLOGY ASSOCIATION June 2001
- JESD51-12 Guidelines for Reporting and Using Electronic Package Thermal Information Joint Electron Devices Engineering Council (JEDEC) SOLID STATE TECHNOLOGY ASSOCIATION May 2005
- JESD15 Thermal Modeling Overview Joint Electron Devices Engineering Council (JEDEC) SOLID STATE TECHNOLOGY ASSOCIATION
- JESD15-1 Compact Thermal Modeling Overview Joint Electron Devices Engineering Council (JEDEC) SOLID STATE TECHNOLOGY ASSOCIATION
- JESD15-2 Terms and Definitions for Modeling Standards Joint Electron Devices Engineering Council (JEDEC) SOLID STATE TECHNOLOGY ASSOCIATION
- JESD15-4 DELPHI Compact Thermal Model Guideline Joint Electron Devices Engineering Council (JEDEC) SOLID STATE TECHNOLOGY ASSOCIATION
- NAVSO P-3641A The Office of the Assistant Secretary of the Navy (Research Development and Acquisition) Acquisition and Business Management October 1999
- JESD51-1 Integrated Circuit Thermal Measurement Method - Electrical Test Method (Single Semiconductor Device) Joint Electron Devices Engineering Council (JEDEC) SOLID STATE TECHNOLOGY ASSOCIATION
- Wang F. Electronics Packaging Simplified Radiation Heat Transfer Analysis Method Proceedings of IEEE Eighth Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems - ITherm 2004 June 1 June 4 2004 Las Vegas, Nevada, USA
- Wang F. January 13-16 2002 Finite Elements or Finite Volumes: Which to Choose for Airborne Electronic Packaging Thermal Analysis Proceedings of International Conference of The United Engineering Foundation, Thermal Challenges in Next Generation Electronic Systems THERMES-2002 Santa Fe, New Mexico, USA