This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Excitation Strategies for a Wound Rotor Synchronous Machine Drive
Technical Paper
2014-01-2138
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
In this research, excitation strategies for a salient-pole wound rotor synchronous machine are explored using a magnetic equivalent circuit model that includes core loss. It is shown that the excitation obtained is considerably different than would be obtained using traditional qd-based models. However, through evaluation of the resulting ‘optimal’ excitation, a relatively straightforward field-oriented type control is developed that is consistent with a desire for efficiency yet control simplicity. Validation is achieved through hardware experiment. The usefulness/applicability of the simplified control to variable speed applications is then considered.
Authors
Citation
Wang, R., Bash, M., and Pekarek, S., "Excitation Strategies for a Wound Rotor Synchronous Machine Drive," SAE Technical Paper 2014-01-2138, 2014, https://doi.org/10.4271/2014-01-2138.Also In
References
- F. Blaschke The principle of field-orientation as applied to the transvector closed-loop control system for rotating-field machines Siemens Rev. 34 217 220 1972
- Gabriel , Rupprecht , Leonhard , Werner , Nordby , Craig J. Field-oriented control of a standard AC motor using microprocessors IEEE Transactions on Industry Applications IA-16 2 186 192 March 1980
- Xu , X. , de Doncker , R. , Novotny , D.W. Stator flux orientation control of induction machines in the field weakening region Conference Record of the 1988 IEEE Industry Applications Society Annual Meeting 437 443 1 2-7 Oct. 1988
- Xu , L. , Xu , X. , Lipo , T.A. , Novotny , D.W. Vector control of a synchronous reluctance motor including saturation and iron loss IEEE Transactions on Industry Applications 27 5 977 985 Sep/Oct 1991
- Li , Shuhui , Haskew , Timothy A. , Swatloski , Richard P. , Gathings , William Optimal and direct-current vector control of direct-driven PMSG wind turbines IEEE Transactions on Power Electronics 27 5 2325 2337 May 2012
- Bazzi , Ali M. , Domínguez-García , Alejandro D. , Krein , Philip T. Markov reliability modeling for induction motor drives under field-oriented control IEEE Transactions on Power Electronics 27 2 534 546 Feb 2012
- Jain , A.K. , Ranganathan , V. T. Modeling and field oriented control of salient pole wound field synchronous machine in stator flux coordinates IEEE Transactions on Industrial Electronics 58 3 960 970 Mar 2011
- Mohseni , Mansour , Islam , Syed M. , Masoum , Mohammad A S Enhanced hysteresis-based current regulators in vector control of DFIG wind turbines IEEE Transactions on Power Electronics 26 1 223 234 Jan 2011
- Pellegrino , Gian-Mario M. , Armando , Eric , Guglielmi , Paolo Direct flux field-oriented control of IPM drives with variable DC link in the field-weakening region IEEE Transactions on Industry Applications 45 5 1619 1627 Oct 2009
- Hopfensperger , B. , Atkinson , D.J. , Lakin , R.A. Stator-flux-oriented control of a doubly-fed induction machine with and without position encoder IEE Proceedings on Electric Power Applications 147 4 241 250 Jul 2000
- Poza , J. , Oyarbide , E. , Sarasola , I. , Rodriguez , M. Vector control design and experimental evaluation for the brushless doubly fed machine IET on Electric Power Applications 3 4 247 256 Jul 2009
- Rekioua , T. , Meibody Tabar, F. , Le Doeuff, R. A new approach for the field-oriented control of brushless, synchronous, permanent magnet machines Fourth International Conference on Power Electronics and Variable-Speed Drives 46 50 Jul 1990
- Morimoto , S. , Sanada , M. , Takeda , Y. Wide-speed operation of interior permanent magnet synchronous motors with high-performance current regulator IEEE Transactions on Industry Applications 30 4 920 926 Jul/Aug 1994
- Bodson , M. , Chiasson , J.N. , Novotnak , R.T. A systematic approach to selecting flux references for torque maximization in induction motors IEEE Transactions on Control Systems Technology 3 4 388 397 Dec 1995
- Wasynczuk , O. , Sudhoff , S.D. , Corzine , K.A. , Tichenor , J.L. , Krause , P.C. , Hansen , I.G. , Taylor , L.M. A maximum torque per ampere control strategy for induction motor drives IEEE Transactions on Energy Conversion 13 2 163 169 Jun 1998
- Wai , J. , Jahns , T.M. A new control technique for achieving wide constant power speed operation with an interior PM alternator machine IEEE Industry Applications Conference 2001 2 807 814 Sept 2001
- Pan Ching-Tsai ; Sue , S.-M. A linear maximum torque per ampere control for IPMSM drives over full-speed range IEEE Transactions on Energy Conversion 20 2 359 366 Jun 2005
- Wang , Wei , Fahimi , Babak , Kiani , Morgan Maximum torque per ampere control of Permanent Magnet Synchronous Machines 2012 XXth International Conference on Electrical Machines (ICEM) 1013 1020 Sept 2012
- Bolognani , Silverio , Petrella , Roberto , Prearo , Antonio , Sgarbossa , Luca Automatic tracking of MTPA trajectory in IPM motor drives based on AC current injection IEEE Transactions on Industry Applications 47 1 105 114 Feb 2011
- Consoli , Alfio , Scarcella , Giuseppe , Scelba , Giacomo , Testa , Antonio Steady-State and transient operation of IPMSMs under maximum-torque-per-ampere control IEEE Transactions on Industry Applications 46 1 121 129 Feb 2010
- Kim , Sung-Min , Yoon , Young-Doo , Sul , Seung-Ki K. , Ide , Kozo , Tomita , Koji Parameter independent maximum torque per ampere (MTPA) control of IPM machine based on signal injection 2010 Twenty-Fifth Annual IEEE Applied Power Electronics Conference and Exposition (APEC) 103 108 Feb 2010
- Soong , W.L. , Miller , T.J.E. Field-weakening performance of brushless synchronous AC motor drives IEE Proceedings on Electric Power Applications 141 6 331 340 1994
- Shi , J.-L. , Liu , T.-H. , Chang , Y.-C. Adaptive controller design for a sensorless IPMSM drive system with a maximum torque control IEE Proceedings on Electric Power Applications 153 6 823 833 Nov 2006
- Hoang K.D. , Zhu Z.Q. , Foster M. Online optimized stator flux reference approximation for maximum torque per ampere operation of interior permanent magnet machine drive under direct torque control 6th IET International Conference on Power Electronics, Machines and Drives (PEMD 2012) 54 59 2012
- M. Depenbrock Direct self control of inverter-fed induction machines IEEE Transactions on Power Electronics 3 420 429 Oct. 1988
- Takahashi I. and Noguchi T. A new quick-response and high efficiency control strategy of an induction machine IEEE Transactions on Industry Applications IA-22 820 827 Sept./Oct. 1986
- Rahman , M.F. , Zhong , L. , Lim Khiang Wee A direct torque-controlled interior permanent magnet synchronous motor drive incorporating field weakening IEEE Transactions on Industry Applications 34 6 1246 1253 Nov./Dec. 1998
- Buja , G.S. , Kazmierkowski , M.P. Direct torque control of PWM inverter-fed AC motors - a survey IEEE Transactions on Industry Electronics 51 4 744 757 Aug. 2004
- Inoue , Yukinori , Shigeo , Morimoto , Masayuki , Sanada Control method suitable for direct-torque-control-based motor drive system satisfying voltage and current limitations IEEE Transactions on Industry Applications 48 3 970 976 Jun 2012
- Choi Chan-Hee , Seok Jul-Ki , Lorenz , R.D. Wide-speed direct torque and flux control for interior PM synchronous motors operating at voltage and current limits IEEE Transactions on Industry Applications 49 1 109 117 Feb 2013
- Liu Y , Zhu ZQ , Shi YF , Howe D Sensorless direct torque control of a permanent magnet brushless AC drive via an extended Kalman filter Second IEE International Conference on Power Electronics, Machines and Drives 303 307 Jan 2004
- Jovanovic , M. Sensored and sensorless speed control methods for brushless doubly fed reluctance motors IET on Electric Power Applications 3 6 503 513 Nov 2009
- Foo , G. , Rahman , M.F. Direct torque and flux control of an IPM synchronous motor drive using a backstepping approach IET on Electric Power Applications 3 5 413 421 Sept 2009
- Friedrich G , Girardin A Integrated starter generator IEEE Industry Applications Magazine 15 4 26 34 July-Aug. 2009
- Friedrich , G. Experimental comparison between wound rotor and permanent magnet synchronous machine for integrated starter generator applications 2010 IEEE Energy Conversion Congress and Exposition (ECCE) 1731 1736 12-16 Sept. 2010
- Wang , R. , Pekarek , S. , Bash , M. Alternative excitation strategies for a wound rotor synchronous machine drive IEEE Energy Conversion Congress and Exposition (ECCE) 2300 2307 15-20 Sept. 2012
- Bash , M.L. , Pekarek , S.D. Analysis and validation of a population-based design of a wound-rotor synchronous machine IEEE Transactions on Energy Conversion 27 3 603 614 Sept 2012
- Bash , M.L. , Pekarek , S.D. Modeling of salient-pole wound-rotor synchronous machines for population-based design IEEE Transactions on Energy Conversion 26 2 381 392 June 2011
- Corzine , K.A. , Kuhn , B.T. , Sudhoff , S.D. , Hegner , H.J An improved method for incorporating magnetic saturation in the Q-D synchronous machine model IEEE Transactions on Energy Conversion 13 3 270 275 Sept 1998
- Krause , P. C. , Wasynczuk O. , Sudhoff S. D. Analysis of Electric Machinery IEEE. Press 2002