This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Acoustic Simulation of Medium Speed IC-Engine Exhaust Gas After Treatment Devices with Substrate
Technical Paper
2014-01-2057
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The after treatment devices (ATD) used in internal combustion engine (IC-engine) exhaust systems are mainly designed with emphasis on emission control, i.e. chemical efficiency, while paying less attention to the acoustic performance. In automotive applications, the duct diameters are so small that studying the acoustic wave propagation only in the plane wave frequency range is usually sufficient. In the case of medium speed IC-engines, used for example in power plants and ships, the three dimensional acoustic phenomena must also be taken into account. The main elements of the medium speed IC-engine ATD are the selective catalytic reducer (SCR) and oxidation catalyst (OC), which are based on a large amount of coated channels, i.e. the substrates. The number and type of the substrates depends not only on the regional environment legislations but also on the engine type. In this study the acoustic attenuation of a medium speed IC-engine ATD is simulated and the results are compared with measurements. The focus is in the low and mid frequency range. That is, the three dimensional waves inside the ATD are taken into account whereas only the plane waves are assumed to propagate at the inlet and outlet ports. The paper also discusses how to extend the classical one dimensional two-port solution into the higher frequencies. Using the computationally effective two-port solution in a wider frequency range is of great importance, e.g., when searching the acoustically optimal substrate configuration.
Recommended Content
Authors
Topic
Citation
Hynninen, A. and Abom, M., "Acoustic Simulation of Medium Speed IC-Engine Exhaust Gas After Treatment Devices with Substrate," SAE Technical Paper 2014-01-2057, 2014, https://doi.org/10.4271/2014-01-2057.Also In
References
- Pierce , A. Acoustics: an introduction to its physical principles and applications Acoustical Society of America 0-88318-612-8 1989
- Munjal , M. L. Acoustics of Ducts and Mufflers with Application to Exhaust and Ventilation System Design John Wiley & Sons New York 0-471-84738-0 1987
- Glav , R. , and Åbom , M. A general formalism for analyzing acoustic 2-port networks Journal of Sound and Vibration 202 5 739 747 1997 10.1006/jsvi.1996.0808
- Elnady , T. , and Åbom , M. SIDLAB: new 1D sound propagation simulation software for complex duct networks Proceedings of the 13th International Congress on Sound and Vibration Vienna, Austria 2006
- Åbom , M. Measurement of the scattering matrix of acoustical two-ports Mechanical Systems and Signal Processing 5 89 104 1991 10.1016/0888-3270(91)90017-Y
- Bodén , H. One-sided multi-port techniques for characterisation of in-duct samples with nonlinear acoustic properties Journal of Sound and Vibration 331 13 3050 3067 2012 10.1016/j.jsv.2012.02.013
- Bodén , H. Two-sided multi-port techniques for characterisation of in-duct samples with non-linear acoustic properties Acta Acustica united with Acustica 99 3 359 378 2013 10.3813/AAA.918618
- Allam , S. , and Åbom , M. Acoustic modelling and testing of diesel particulate filters Journal of Sound and Vibration 288 1 255 273 2005 10.1016/j.jsv.2005.01.004
- Allam , S. , and Åbom , M. Modeling and testing of after-treatment devices Journal of Vibration and Acoustics 128 3 347 356 2006 10.1115/1.2172262
- Allam , S. , and Åbom , M. Sound propagation in an array of narrow porous channels with application to diesel particulate filters Journal of Sound and Vibration 291 3 882 901 2006 10.1016/j.jsv.2005.07.022
- Elnady , T. , Elsaadany , S. , and Herrin , D. Investigation of the Acoustic Performance of After Treatment Devices SAE Int. J. Passeng. Cars - Mech. Syst. 4 2 1068 1075 2011 10.4271/2011-01-1562
- Elnady , T. , Åbom , M. , and Allam , S. Modeling perforates in mufflers using two-ports Journal of Vibration and Acoustics 132 061010 2010 10.1115/1.4001510
- Elnady , T. , Elsaadany , S. , and Åbom , M. Flow and pressure drop calculation using two-ports Journal of Vibration and Acoustics 133 041016 10.1115/1.4003593
- Glav , R. , Bodén , H. , and Åbom , M. An acoustic model for automotive catalytic converters Proceedings of Internoise 1988 88 1261 1266 1988
- Dokumaci , E. Sound transmission in narrow pipes with superimposed uniform mean flow and acoustic modelling of automobile catalytic converters Journal of Sound and Vibration 182 5 799 808 1995 10.1006/jsvi.1995.0233
- Zwikker , C. , and Kosten , C. Sound absorption materials 1949
- Dokumaci , E. On transmission of sound in circular and rectangular narrow pipes with superimposed mean flow Journal of Sound and Vibration 210 3 375 389 1998 10.1006/jsvi.1997.1336
- Peat , K. A first aproximation to the effects of mean flow on sound propagation through cylindrical capillary tubes Journal of Sound and Vibration 175 4 475 489 1994 10.1006/jsvi.1994.1340
- Astley , R. , and Cummings , A. Wave propagation in catalytic converters: Formulation of the problem and finite element to solution scheme Journal of Sound and vibration 188 5 635 657 1995 10.1006/jsvi.1995.0616
- Peat , K Convected acoustic wavemotion along a capillary duct with an axial temperature gradient Journal of Sound and Vibration 203 5 855 866 1997 10.1006/jsvi.1997.0917
- Peat , K. , and Kirby , R. Acoustic wave motion along a narrow cylindrical duct in the presence of an axial mean flow and temperature gradient The Journal of the Acoustical Society of America 107 1859 2000 10.1121/1.428466
- Hynninen , A. , Turunen , R. , Åbom , M. , and Bodén , H. Acoustic source data for medium speed IC-engines Journal of Vibration and Acoustics 134 051008 2012 10.1115/1.4006415
- Bodén , H. , and Glav , R. Exhaust and in take noise and acoustical design of mufflers and silencers Handbook of noise and vibration control Crocker M. Wiley 978-0-471-39599-7 2007
- Keefe , D. Acoustical wave propagation in cylindrical ducts: Transmission line parameter approximations for isothermal and nonisothermal boundary conditions The Journal of the Acoustical Society of America 75 58 1984 10.1121/1.390300
- Stinson , M. The propagation of plane sound waves in narrow and wide circular tubes, and generalization to uniform tubes of arbitrary cross-sectional shape The Journal of the Acoustical Society of America 89 550 1991 10.1121/1.400379
- Selamet , A. , Easwaran , V. , Novak , J. , and Kach , R. Wave attenuation in catalytic converters: reactive versus dissipative effects The Journal of the Acoustical Society of America 103 2 935 943 1998 10.1121/1.421210
- Christoffersen , P. , Frederiksen , S. , and Mikkelsen , S. Progress in SCR denox and silencing technology for diesel engine exhaust systems CIMAC Congress Copenhagen 1998
- Gijrath , H. , and Åbom , M. A matrix formalism for fluid-borne sound in pipe systems ASME 5 th International Symposium New Orleans 2002 10.1115/IMECE2002-33356
- Soikkeli , N. , Lehikoinen , M. , and Rönnback , K.-O. Design aspects of SCR systems for HFO fired marine diesel engines Proceedings of the CIMAC Congress Shanghai 2013
- Backlund , L. , and Sundström , P. Compact silencer system - for reduced noise Wärtsilä technical journal 2 53 55 2008
- Gupta , M. The Wärtsilä compact silencer system Wärtsilä technical journal in detail 2 50 54 2012
- Munjal , M. , and Doige , A. Theory of a two source-location method for direct experimental evaluation of the four-pole parameters of an aeroacoustic element Journal of Sound and Vibration 141 2 323 333 1990 10.1016/0022-460X(90)90843-O
- Elnady , T. A platform to measure transmission loss of mufflers with flow Inter-Noise and Noise-Con Congress and Conference Proceedings 2007 Institute of Noise Control Engineering 3418 3427 2007
- International Organization for Standardization Acoustics - determination of sound power radiated into a duct by fans and other air-moving devices - in-duct method ISO standard ISO-5136 2009
- Hynninen , A. , and Åbom , M. Procedure to estimate the in-duct sound power in the high frequency range with non-plane waves ASME 2012 Noise Control and Acoustics Division Conference at Inter-Noise 2012 New York City, New York, USA 181 191 2012 10.1115/NCAD2012-0531
- Hynninen , A. , and Åbom , M. Determination of the non-plane wave frequency range in-duct sound power using wall mounted microphones submitted manuscript