This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Numerical Analysis on Electromagnetic Forming of Automotive Sheets with Flat Spiral Coil
Technical Paper
2014-01-2013
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
In this study, numerical simulations of electromagnetic forming (EmF) for automotive sheet metals with flat spiral coil were performed in order to analyze electromagnetic, mechanical behaviors in EmF process. Two automotive sheets which are 5J32 aluminum alloy sheet and DP780 high strength steel sheet having thickness of 1.0mm were utilized. Numerical simulations were conducted with the commercial software LS-Dyna, which is able to fully couple with electromagnetic and mechanical as well as thermal natures in three dimensional spaces. From numerical analysis, electromagnetic quantities such as Lorentz force and mechanical quantities such as deformed shape of sheet metals were examined. At low charge voltage, the simulations of the deformed shape for two workpiece blanks have a good agreement with the experiments.
Authors
Topic
Citation
Kim, D., Park, H., Kim, J., Lee, Y. et al., "Numerical Analysis on Electromagnetic Forming of Automotive Sheets with Flat Spiral Coil," SAE Technical Paper 2014-01-2013, 2014, https://doi.org/10.4271/2014-01-2013.Also In
References
- Psyk , V. , Risch , D. , Tekkaya , A.E. and Kleiner , M. Electromagentic forming -A Review J. Mater. Process. Technol. 211 787 829 2011
- Seth , M. , Vohnout , V.J. and Daehn , G.S. Formability of steel sheet in high velocity impact J. Mater. Process. Technol. 168 390 400 2005
- Balanethiram , V.S. and Daehn , G.S. Hyperplasticity-increased forming limits at high wrokpiece velocities Scr. Matall. 31 515 520 1994
- Thomas , J.D. , Seth , M. , Daehn , G.S. , Bradley , J.R. and Triantafyllidis , N. Forming limits for electromagnetically expanded aluminum alloy tubes: Theory and experiment Act Mater 55 2863 2873 2007
- Oliveira , D.A. , Worswick , M.J. , Finn , M. and Newman , D. Electromagnetic forming of aluminum alloy sheet: Free-form and cavity fill experiments and model J. Mater. Process. Technol. 170 350 362 2005
- Kim , J.H. , Kim , D. , Han , H.N. , Barlat , F. and Lee , M.-G. Strain rate dependent tensile behavior of advanced high strength steels: Experiment and constitutive modeling Mater. Sci. Eng., A 559 222 231 2013
- Eguia , I. Mangas , A. , Iturbe , R. and Guierrez , M.A. Electromagnetic forming of longitudinal strengthening ribs in roll formed automotive profiles Proceedings of the 4th International Conference on High Speed Forming - ICHSF 2010 Columbus 198 207
- Kim , J. , Noh , H.G. , Ko , S.J. and Kim , T.J. Analysis of electromagnetic forming using sequential electromagnetic-mechanical coupled simulations Transactions of Materials Processing 21 441 446 2012
- Kore , S.D. , Dhanesh , P. and Kulkarni , S.V. and Date , P.P. Numerical Modeling of Electromagnetic Welding Int. J. Appl. Electromagn. Mech. 32 1 9 2010
- Zhang , Y. , Eplattenier , P. L. , Geoff , T. , Vivek , A. , Daehn , G. , Babu , S. Proceedings of 10 th International LS-Dyna Users Conference 8 13 2010
- Kim , D. , Kim , J. , and Lee , M. Evaluation of Electromagnetic Forming Behavior of Automotive Aluminum Alloy Sheet SAE Technical Paper 2013-01-0131 2013 10.4271/2013-01-0131
- LS-Dyna v.971 R4 manual Livermore Software Technology Corporations 2013