This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Network Diagnostic Flow Chart-How to Troubleshoot Vehicle Level CAN Communication and CAN Diagnostic Issues on Nissan and Infinity Vehicles
Technical Paper
2014-01-1978
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Support personnel such as Dealer mechanics and Technicians may not have the necessary skill set to diagnose vehicle level CAN issues, especially when there are multiple buses, and upwards of 40 modules per vehicle. CAN issues may occur only once in a while, not allowing one to remember what they did last time to fix the issue. Many tools are available such as Service Manual, CAN Tool, Diagnostic Tools, CAN message list, and Diagnostic Specification, to make matters even more complicated. How can a new Mechanic or Technician be asked to troubleshoot such a complicated networked vehicle? Where should one begin? Training can help, but network communication is black magic to most. In an effort to quickly and accurately solve all vehicle level CAN issues, a Network Diagnostic Flow Chart, NDFC, for Nissan and Infinity vehicles was created. The NDFC reduces labor, summarizes experience, and if followed, will help solve all vehicle level CAN issues. The NDFC is a troubleshooting flow chart, similar to one you would find for any module but dedicated to the CAN network. The NDFC can and has diagnosed any vehicle level CAN and Diag-On-CAN diagnostic issues. All failure modes including but not limited to U1000's, configuration, CAN wiring issues, termination resistance, open grounds, and Gateway issues are covered. A concise, easy to follow flow chart will help the inexperienced and experienced troubleshoot CAN networks.
Recommended Content
Technical Paper | Organizing the Engineer's Toolbox |
Technical Paper | Why You Should Use Web Based Learning for CAD Training in Your Organization |
Technical Paper | Introduction of Functional Periodicity to Prevent Long-Term Failure Mechanism |
Authors
Topic
Citation
Robertson, T., "Network Diagnostic Flow Chart-How to Troubleshoot Vehicle Level CAN Communication and CAN Diagnostic Issues on Nissan and Infinity Vehicles," SAE Technical Paper 2014-01-1978, 2014, https://doi.org/10.4271/2014-01-1978.Also In
References
- Robertson Timothy CAN Diag Support Monitor ETI Winter Tech Week 2010, Nissan Presentation December 2010
- ESD CAN-Bus Troubleshooting Guide Rev 1.1 http://www.esd-electronics-usa.com/CAN-Bus-Troubleshooting-Guide.html
- Hobbs David Communication Is Key: Serial Bus Diagnosis September 2011 http://www.motor.com/article.asp?article_ID=1819
- Boys Robert CAN: Controller Area Network Introduction and Primer, September 2004, Version 3.1 http://www.dgtech.com/images/primer.pdf
- Nissan Technical Service Bulletins NTB13-027[1]-CAN Diag Flow Chart-Nissan” and Infinity “ITB13-006[1]-CAN Diag Flow Chart-Infiniti
- Markel Andrew Tech Feature: Controller Area Network (CAN) Bus Topology February 22 2013 http://www.diagnosticnews.com/featured/tech-feature-controller-area-network-can-bus-topology/