This content is not included in your SAE MOBILUS subscription, or you are not logged in.
A Life Cycle Assessment of Natural Fiber Reinforced Composites in Automotive Applications
ISSN: 0148-7191, e-ISSN: 2688-3627
Published April 1, 2014 by SAE International in United States
Annotation ability available
Automakers have the opportunity to utilize bio-based composite materials to lightweight cars while replacing conventional, nonrenewable resource materials. In this study, Life Cycle Assessment (LCA) is used to understand the potential benefits and tradeoffs associated with the implementation of bio-based composite materials in automotive component production. This cradle-to-grave approach quantifies the fiber and resin production as well as material processing, use, and end of life for both a conventional glass-reinforced polypropylene component as well as a cellulose-reinforced polypropylene component. The comparison is calculated for an exterior component on a high performance vehicle. The life cycle primary energy consumption and global warming potential (GWP) are evaluated. Reduced GWP associated with the alternative component are due to the use of biomass as process energy and carbon sequestration, in addition to the alternative material component's lightweighting effect. Sensitivity analyses exploring both the effect of the automobile's lifetime as well as material sourcing is explored.
CitationBoland, C., DeKleine, R., Moorthy, A., Keoleian, G. et al., "A Life Cycle Assessment of Natural Fiber Reinforced Composites in Automotive Applications," SAE Technical Paper 2014-01-1959, 2014, https://doi.org/10.4271/2014-01-1959.
- Puri, P., Compston, P. and Pantano, V., “Life Cycle Assessment of Australian Automotive Door Skins.” The International Journal of Life Cycle Assessment 14(5):420-428, 2009, doi:10.1007/s11367-009-0103-7.
- Natural Fiber Composites: A Review. Pacific Northwest National Laboratory, 2010.
- Environmental Management-Life Cycle Assessment-Principles and framework. ISO 14040:2010. Rev. June 2013.
- Wötzel, K., Wirth, R., and Flake M., “Life cycle studies on hemp fibre reinforced components and ABS for automotive parts.” Die Angewandte Makromolekulare Chemie 272(1):121-127, 1999, doi:10.1002/(SICI)1522-9505(19991201)272:1<121::AID-APMC121>3.0.CO;2-T.
- Kim, S., Dale, B. E., Drzal, L. T., Misra, M., “Life Cycle Assessment of Kenaf Reinforced Biocomposite.” Journal of Biobased Materials and Bioenergy 2(1):85-93, 2009, doi:10.1166/jbmb.2008.207.
- Witik, R. A., Payet, J., Michaud, V., Ludwig, C., and Månson, J. E., “Assessing the life cycle costs and environmental performance of lightweight materials in automobile applications.” Composites Part A: Applied Science and Manufacturing, 42(11):1694-1709, 2011, doi:10.1016/j.compositesa.2011.07.024.
- Graupner, N., Herrmann, A.S., Mussig, J., “Natural and man-made cellulose fiber-reinforced poly(lactic acid) (PLA) composites: An overview about mechanical characteristics and application areas,” Composites Part A: Applied Science and Manufacturing 40(6-7):810-821. 2009. Doi:10.1016/j.compositesa.2009.04.003.
- Brito de Figueiredo, M.C., de Frietas Rosa, M., Ugaya, C. M. L., de Souza Filho, M., da Silva Braid, A.C.C., de Melo, L. F. L., “Life cycle assessment of cellulose nanowhiskers,” Journal of Cleaner Production 35:130-139, 2012.
- Environmental Protection Agency, “Cars and Light Trucks: Test Car List Data Files,” http://www.epa.gov/otaq/tcldata.htm, June 2013.
- Sonne Hall, E., Weyerhaeuser NR Company, personal communication, May 2013.
- Argonne National Lab, “Greet Model: The Greenhouse Gases, Regulated Emissions and Energy Use in Transportation Model,” http://greet.es.anl.gov/. Apr 2013.
- Environmental Protection Agency, “eGrid,” http://www.epa.gov/cleanenergy/energy-resources/egrid/index.html. June 2013.
- National Council for Air and Stream Improvement, Inc. 2011. Greenhouse gas and non-renewable energy benefits of black liquor recovery. Technical Bulletin No. 984. Research Triangle Park, N.C.: National Council for Air and Stream Improvement, Inc.
- McKendry, P., “Energy Production from biomass (Part 1).” Bioresource Technology 83: 37-46, 2002. Doi:10.1016/S0960-8524(01)00118-3.
- American Forest & Paper Association. 2012. 2012 AF&PA Sustainability Report. Washington DC: American Forest & Paper Association. http://www.afandpa.org/Sustainability/.
- Gabi 6 Professional and Extension, Computer Software, PE International, Boston, MA. 2011.
- Franklin Associates. “Cradle-to-Gate Life Cycle Inventory of Nine Plastic Resins and Four Polyurethane Precursors.” Prepared for The Plastics Division of The American Chemistry Council, Aug 2011.
- Thiriez, A., and Gutowski, T. “An Environmental Analysis of Injection Molding.” Proceedings of the 2006 IEEE International Symposium on Electronics and Environment, 2006, doi:10.1109/ISEE.2006.1650060.
- Franklin Associates. “Life Cycle Inventory of Plastic Fabrication Processes: Injection Molding and Thermoforming.” Prepared for Rigid Plastics Group, Sept 2011.
- Simapro 7.3.2 MultiUser, Computer Software, PRe International, Washington DC, 2012.
- Kim, H. C., Wallington, T. J., “Life Cycle Assessment of Vehicle Lightweighting: A Physics-Based Model of Mass-Induced Fuel Consumption”, Environmental Science and Technology 47: 14358-66, 2013.
- Sawyer-Beaulieu, S., “Gate-To-Gate Life Cycle Inventory Assessment of North American End-of-Life Vehicle Management Processes,” Ph.D. thesis, Civil and Environmental Engineering Department, University of Windsor, Windsor, 2009.
- International Panel on Climate Change, “IPCC Fourth Assessment Report: Climate Change 2007,” http://www.ipcc.ch/publications_and_data/ar4/wg1/en/ch2s2-10-2.html, Aug 2012.
- Environmental Protection Agency, “Tool for the Reduction and Assessment of Chemical and Other Environmental Impacts (TRACI),” http://www.epa.gov/nrmrl/std/traci/traci.html, Sept 2013.
- Hon, D.S., “Cellulose: a random walk along its historical path,” Cellulose 1:1-25, 1994.