This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Study of Power Losses in a Two-Speed Dual Clutch Transmission
Technical Paper
2014-01-1799
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
This paper mainly studies the power losses in a refined two-speed dual clutch transmission which is equipped in a electric vehicle test rig. Both numerical and experimental investigations are carried out. After theoretical analysis of the power losses original sources, the developed model is implemented into simulation code to predict the power losses. In order to validate the effectiveness of the proposed model, results from experimental test are used to compare the difference the simulation and test. The simulation and test result agree well with each other. Results show that the power losses in the two-speed are mainly generated by multi-plate wet clutch drag torque and gear churning loss.
Recommended Content
Authors
Citation
Zhou, X., Walker, P., Zhang, N., Zhu, B. et al., "Study of Power Losses in a Two-Speed Dual Clutch Transmission," SAE Technical Paper 2014-01-1799, 2014, https://doi.org/10.4271/2014-01-1799.Also In
References
- Chan CC Electric, Hybrid & Fuel Cell Vehicles: Overview, State-of-the-art, Key Technologies & Issues Proceedings of the IEEE 2007 95 4 704 718
- Zhou , X. , Walker , P. , Zhang , N. , and Zhu , B. , Performance Improvement of a Two Speed EV through Combined Gear Ratio and Shift Schedule Optimization SAE Technical Paper 2013-01-1477 2013 10.4271/2013-01-1477
- Diab Y , Ville F and Velex P Investigations on Power Losses in high speed gears Proc. Inst. Mech. Eng. Part J: J. Eng. Tribol. 2006 220 191 198
- Heingartner P and Mba D Determining Power Losses in the Helical Gear Mesh Gear Technol. 2005 32 37
- Li S , Vaidyanathan A , Harianto J , and Kahraman A Influence of Design Parameters on Mechanical Power Losses of Helical Gear Pairs Journal of Advanced Mechanical Design, Systems, and Manufacturing 2009 3 2 13
- Xu H , Kahraman A , Anderson NE , and Maddock DG Prediction of mechanical efficiency of parrallel-axis gear pairs Journal of Mechanical Design 2007 129 January 58 68
- Dawson PH Windage loss in large high speed gears Proc. Inst. Mech. Eng. Part J: J. Engineering Tribology 1984 198A 1 51 59
- Eastwick CN and Johnson G Gear windage: a review J. Mech. Des. 2008 130
- Diab Y , Ville F , Houjoh H , Sainsot P et al. Experimental and numerical investigations on the air pumping phenomenon in high speed spur and helical gears Proc. Inst. Mech. Eng., Part C: J. Mechanical Engineering Sciences 2004 219 G8 785 790
- Changenet C and Velex P A model for the prediction of churning losses in geared transmissions-preliminary results J. Mech. Des. 2006 129 1 128 133
- Changenet C , Oviedo-Marlot X and Velex P Power loss predictions in geared transmissions using thermal networks-application to a six speed manual gearbox Trans. Am. Soc. Mech. Eng. 2006 128 618 625
- Seetharaman S and Kahraman A Load-Independent Spin Power Losses of a Spur Gear Pair: Model Formulation Journal of Tribology 2009 131 2
- Harris TA Rolling Bearing Analysis 1966
- Hashimoto H , Wada S and Murayama Y The performance of a Turbulent Lubricated Sliding Bearing Subject to Centrifugal Effect Trans. Jpn, Soc. Mech. Eng., Ser, C 1984 49 446 1753 1761
- Walker PD , Zhang N , Tamba R , and Fitzgerald S Simulations of drag torque affecting synchronisers in a dual clutch transmissions Japan J. Indust. Appl. Math. 2011 28 119 140
- British Standards Institute BS ISO/TR 14179-1:2001 Gears-thermal capacity-Part 1: rating gear drives with thermal equilibrium at 95°C sump temperature. Part 2:Thermal load-carrying capacity 2001
- Kato Y , Murasugi T and Hirano H Fuel Economy Improvement through Tribological Analysis of the Wet Clutches and Brakes of an Automatic Transmission Society of automotive Engineers of Japan 1993 16 12 57 60
- Iqbal S , Janssens T , Desmet W , and Al-Bender F Transmitted power and energy flow behaviour of degrading wet friction clutches International Journal of Applied Research in Mechanical Engineering 2012 2 1 94 100
- Lechner G and Naunheimer H Automotive Transmissions-Fundamentals, Selection, Design and Application 1999 Berlin Springer
- Patel PD and Patel JM An Experimental Investigation of Power Losses in Manual Transmission Gear Box International Journal of Applied Research in Mechanical Engineering 2012 2 1 1 5
- Iritani , M. , Aoki , H. , Suzuki , K. , and Morita , Y. , Prediction Technique for the Lubricating Oil Temperature in Manual Transaxle SAE Technical Paper 1999-01-0747 1999 10.4271/1999-01-0747
- Seetharaman S , Kahraman A , Bednarek G , and Rosander P A Model to Predict Mechanical Power Losses of Manual Transmissions Automobiltechnische Zeitschrift 2008 4 346 357
- Per R , Georg B , Satya S , and Ahmet K Development of an efficiency model for manual transmissions ATZ worldwide 2008 110 4 36 43
- Michlin Y and Myunster V Determination of power losses in gear transmissions with rolling and sliding friction incorporated Mechanism and Machine Theory 2002 37 2 167 174
- Goetz M Integrated Powertrain Control for Twin Clutch Transmissions University of Leeds 2005