This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Effect of Off-Axis Needle Motion on Internal Nozzle and Near Exit Flow in a Multi-Hole Diesel Injector

Journal Article
2014-01-1426
ISSN: 1946-3952, e-ISSN: 1946-3960
Published April 01, 2014 by SAE International in United States
Effect of Off-Axis Needle Motion on Internal Nozzle and Near Exit Flow in a Multi-Hole Diesel Injector
Sector:
Citation: Battistoni, M., Xue, Q., Som, S., and Pomraning, E., "Effect of Off-Axis Needle Motion on Internal Nozzle and Near Exit Flow in a Multi-Hole Diesel Injector," SAE Int. J. Fuels Lubr. 7(1):167-182, 2014, https://doi.org/10.4271/2014-01-1426.
Language: English

References

  1. Arcoumanis , C. , Flora , H. , Gavaises , M. , and Badami , M. Cavitation in Real-Size Multi-Hole Diesel Injector Nozzles SAE Technical Paper 2000-01-1249 2000 10.4271/2000-01-1249
  2. Baumgarten C. 2006 Mixture Formation in Internal Combustion Engines Springer-Verlag Berlin
  3. Som S. , Ramirez A. I. , Longman D. E. , Aggarwal S. K. Effect of nozzle orifice geometry on spray, combustion, and emission characteristics under diesel engine conditions 2011 Fuel 90 1267 1276
  4. Giannadakis , E. , Gavaises , M. and Arcoumanis , C. Modelling of cavitation in diesel injector nozzles J. Fluid Mech. 2008 616 153 193
  5. de Villiers , E. , Gosman , A. , and Weller , H. Large Eddy Simulation of Primary Diesel Spray Atomization SAE Technical Paper 2004-01-0100 2004 10.4271/2004-01-0100
  6. Powell C.F. , Kastengren A.L. , Liu Z. , Fezzaa K. The Effects of Diesel Injector Needle Motion on Spray Structure J. Eng. Gas Turbines Power 2011 133 1 2010 10.1115/1.4001073
  7. Kastengren , A.L. , Tilocco , F.Z. , Powell , C.F. , Manin , J. , Pickett , L.M. , Payri , R. , and Bazyn , T. Engine combustion network (ECN): measurements of nozzle geometry and hydraulic behavior Atomization and Sprays 2013 Atom Sprays 22 12 1011 1052
  8. Tatschl , R. , Sarre , C.V.K. , Alajbegovic , A. , and Winklhofer , E. Diesel spray break-up modelling including multidimensional cavitating nozzle flow effects 16th Proceedings of the ILASS Europe Darmstadt 2000
  9. Payri , R. , Margot , X. , and Salvador , F. A Numerical Study of the Influence of Diesel Nozzle Geometry on the Inner Cavitating Flow SAE Technical Paper 2002-01-0215 2002 10.4271/2002-01-0215
  10. Battistoni , M. and Grimaldi , C. Analysis of Transient Cavitating Flows in Diesel Injectors Using Diesel and Biodiesel Fuels SAE Int. J. Fuels Lubr. 3 2 879 900 2010 10.4271/2010-01-2245
  11. Battistoni , M. , and Grimaldi , C. N. Numerical analysis of injector flow and spray characteristics from diesel injectors using fossil and biodiesel fuels Applied Energy 2012 97 656 666
  12. Giannadakis , E. , Papoulias , D. , Gavaises , M. , Arcoumanis , C. et al. Evaluation of the Predictive Capability of Diesel Nozzle Cavitation Models SAE Technical Paper 2007-01-0245 2007 10.4271/2007-01-0245
  13. Papoutsakis , A. , Theodorakakos , A. , Giannadakis , E. , Papoulias , D. et al. LES Predictions of the Vortical Flow Structures in Diesel Injector Nozzles SAE Technical Paper 2009-01-0833 2009 10.4271/2009-01-0833
  14. Edelbauer W. , Suzzi D. , Sampl P. , Tatschl R. , Krueger C. and Weigand B. New concept for on-line coupling of 3D Eulerian and Lagrangian spray approaches in engine simulations Proceedings of the ICLASS 2006 Kyoto, Japan
  15. Befrui , B. , Corbinelli , G. , D'Onofrio , M. , and Varble , D. GDI Multi-Hole Injector Internal Flow and Spray Analysis SAE Technical Paper 2011-01-1211 2011 10.4271/2011-01-1211
  16. Vallet , A. , Burluka , A. A. , & Borghi , R. Development of a Eulerian Model for the “Atomization” of a Liquid Jet Atomization and Sprays 11 619 642 2001
  17. Garcia-Oliver , J. M. , Pastor , J. M. , Pandal , A. , Trask , N. , Baldwin , E. , and Schmidt , D. P. Diesel Spray CFD Simulations Based on the Sigma-Y Eulerian Atomizaton Model Atomization and Sprays 23 71 95 2013
  18. Xue , Q. , Battistoni , M. , Som , S. , Quan , S. et al. Eulerian CFD Modeling of Coupled Nozzle Flow and Spray with Validation against X-ray Radiography Data SAE Int. J. Engines 7 2 in press 2014 10.4271/2014-01-1425
  19. Desjardins , O. , McCaslin , J. , Owkes , M. , Brady , P. Direct numerical and large-eddy simulation of primary atomization in complex geometries Atomization and Spray 2013 10.1615/AtomizSpr.201300767
  20. Chiavola , O. and Palmieri , F. Modeling Needle Motion Influence on Nozzle Flow in High Pressure Injection System SAE Technical Paper 2007-01-0250 2007 10.4271/2007-01-0250
  21. Spathopoulou , M. , Papoulias , D. , Giannadakis , E. , Gavaises , M. et al. Influence of the Spatially Resolved Nozzle Hole Exit Flow Distribution on Diesel Spray Development SAE Technical Paper 2007-24-0025 2007 10.4271/2007-24-0025
  22. Xue , Q. , Som , S. , Battistoni , M. , Longman , D.E. , Zhao , H. , Senecal , P.K. , and Pomraning , E. Three-dimensional Simulations of the Transient Internal Flow in a Diesel Injector: Effects of Needle Movement Proceedings of ILASS Americas 2013
  23. Battistoni , M. , Grimaldi , C. , and Mariani , F. Coupled Simulation of Nozzle Flow and Spray Formation Using Diesel and Biodiesel for CI Engine Applications SAE Technical Paper 2012-01-1267 2012 10.4271/2012-01-1267
  24. Caika , V. , Sampl , P. , and Greif , D. Integrated 1D/2D/3D Simulation of Fuel Injection and Nozzle Cavitation SAE Int. J. Engines 6 3 1544 1552 2013 10.4271/2013-24-0006
  25. Chiatti , G. and Palmieri , F. Influence of Actual Injector Tip on Multi-Hole Diesel Nozzle Flow SAE Technical Paper 2012-32-0029 2012 10.4271/2012-32-0029
  26. Senecal , P. , Richards , K. , Pomraning , E. , Yang , T. et al. A New Parallel Cut-Cell Cartesian CFD Code for Rapid Grid Generation Applied to In-Cylinder Diesel Engine Simulations SAE Technical Paper 2007-01-0159 2007 10.4271/2007-01-0159
  27. Richards , K. J. , Senecal , P. K. , and Pomraning , E. CONVERGE Manual (Version 2.1.0) Convergent Science, Inc. Middleton, WI 2013
  28. Zhao , H. , Quan , S. , Dai , M. , Pomraning , E. , Senecal , E. , Xue , Q. , Battistoni , M. , and Som , S. Proceedings of the ASME 2013 Internal Combustion Engine Division Fall Technical Conference ICEF2013-19167 Dearborn, MI 2013
  29. Winklhofer , E. , Kull , E. , Kelz , E. , and Morozov , A. Comprehensive hydraulic and flow field documentation in model throttle experiments under cavitation conditions ILASS-Europe Zurich 2001
  30. Duke , D.J. , Kastengren , A.L. , Tilocco , F.Z. , Powell , C.F. Synchrotron X-Ray Measurements of Cavitation Proceedings of ILASS Americas 2013 Pittsburgh, PA 2013
  31. Battistoni , M. , Som , S. , Longman , D.E. Comparison of Mixture and Multi-Fluid Models for In-Nozzle Cavitation Prediction J. Eng. Gas Turb. Power 2013
  32. Bilicki , Z. , Kestin , J. Physical Aspects of the Relaxation Model in Two-Phase Flow 1990 Proc. Roy. Soc. Lond. A. 428 379 397
  33. Schmidt , D.P. , Gopalakrishnan , S. and Jasak , H. Multidimensional simulation of thermal non-equilibrium channel flow Int. J. of Multiphase Flow 36 2010 284 292
  34. Rakshit , S. , and Schmidt , D.P. Simulating cavitating flow in fuel injector nozzles with an equilibrium-based model Proceedings of ILASS Americas 2012 San Antonio, TX 2012 paper no. 62
  35. Neroorkar K.D. , Mitcham , C.E. , Plazas , A.H. , Grover , R.O. , and Schmidt D.P. Simulations and Analysis of Fuel Flow in an Injector Including Transient Needle Effects Proceedings of ILASS Americas 2012 San Antonio, TX 2012 paper no. 88
  36. Shields B. , Neroorkar K. , and Schmidt D.P Cavitation as Rapid Flash Boiling Proceedings of ILASS Americas 2011 Ventura, CA 2011 paper no. 110
  37. Plesset , M. and Prosperetti , A. Bubble Dynamics and Cavitation Annu. Rev. Fluid Mech. 9 145 1977
  38. Downar-Zapolski , P. , Bilicki , Z. , Bolle , L. , Franco , J. The non-equilibrium relaxation model for one-dimensional flashing liquid flow 1996 Int. J. of Multiphase Flow 22 473 483
  39. Payri , R. , Gil , A. , Plazas , A. , and Giménez , B. Influence of Nozzle Seat Type on Internal Flow of Convergent Nozzles SAE Technical Paper 2004-01-2010 2004 10.4271/2004-01-2010
  40. Benajes J. , Pastor J.V. , Payri R. , and Plazas A.H. Analysis of the Influence of Diesel Nozzle Geometry in the Injection Rate Characteristic Journal of Fluids Engineering 126 2004
  41. Kastengren , A. , Powell , C. F. , Liu , Z. , Fezzaa , K. , and Wang , J. High-speed x-ray imaging of diesel injector motion Proc. of the ASME Internal Combustion Engine Division Spring Technical Conference, Paper ICES2009-76032 2009
  42. Manin , J. , Kastengren , A. , and Payri , R. Understanding the acoustic oscillations observed in the injection rate of a common-rail DI diesel injector J. Eng. Gas Turbines Power 134 122801 2012

Cited By