This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Investigations of the Multiple Fuel Injection and Atomization with the Use of Two Outward-Opening Injectors
Technical Paper
2014-01-1402
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The paper discusses the results of investigations into fuel atomization with the use of two high-pressure angularly arranged injectors fitted in a combustion of constant volume chamber. Using two Direct Injection injectors is a new conception, which was not applied yet. Nowadays, the conceptions where two injectors are used, one in direct injection and one in port injection are used. It is expected, that new gasoline Direct Injection system will allow better fuel spray and following combustion process. It is especially important in spray-guided mixture creating. The analysis mainly relates to the parameters of the fuel spray: spray penetration, observed fuel spray area in reference to both a single fuel spray and two angularly fuel sprays. The assessment of the uniformity of the fuel spray penetration for both sprays has been carried out. The authors have shown a growth in the fuel spray volume and a reduction of the time of the fuel spray penetration during the angularly arranged injection at identical fuel doses (identical accumulative injection duration for a single fuel dose and two angularly fuel doses). In paper there are also presented the research results about multi-injection (three doses) where gasoline is injected into research Constant Volume Chamber. The penetration depth and area occupied by injected fuel into CVC during injection with different configurations were analyzed.
Recommended Content
Authors
Citation
Pielecha, I. and Borowski, P., "Investigations of the Multiple Fuel Injection and Atomization with the Use of Two Outward-Opening Injectors," SAE Technical Paper 2014-01-1402, 2014, https://doi.org/10.4271/2014-01-1402.Also In
References
- Heiduk , T. , Kuhn , M. , Stichlmeir , M. and Unselt , F. The new 1.8 l TFSI Engine from Audi part 2: Mixture Formation, Combustion Method and Turbocharging MTZ worldwide Magazine 72 7-8 58 64 2011 10.1365/s38313-011-0078-1
- Itoh , T. , Kakuho , A. , Hiraya , K. , Takahashi , E. et al. A study of mixture formation processes in direct injection stratified charge gasoline engines by quantitative laser- induced fluorescence imaging and the infrared absorption method International Journal of Engine Research 7 2006 10.1243/14680874JER04705
- Jelitto , Ch. Numerische Auslegung eines neuen Brennverfahrens für Benzin-Direktein-spritzung Dissertation Der Otto-von-Guericke-Universität Magdeburg Fakultät für Maschinenbau 2004
- Marchi , A. , Nouri , J. , Yan , Y. and Arcoumanis , C. Spray stability of outwards opening pintle injectors for stratified direct injection spark ignition engine operation International Journal of Engine Research 11 2010 10.1243/14680874JER605
- Peterson , B. , Reuss , D.L. and Sick , V. High-speed imaging analysis of misfires in a spray-guided direct injection engine Proceedings of the Combustion Institute 33 2 2011 10.1016/j.proci.2010.07.079
- Pielecha , I. , Borowski , P. , Czajka , J. and Wislocki , K. Spray Analysis Carried Out With the Use of Two Angularly Arranged Outward-Opening Injectors ILASS Americas 25th Annual Conference on Liquid Atomization and Spray Systems Pittsburgh May 5 8 2013
- Pielecha , I. , Maslennikov , D. , and Wislocki , K. Optical Research of Spray Development of E85 Fuel in High Pressure Gasoline Direct Injection System SAE Technical Paper 2010-01-2285 2010 10.4271/2010-01-2285
- Pielecha , I. , Wislocki , K. , Czajka , J. and Maslennikov , D. Gasoline Atomization with the Use of Two Opposite High- Pressure Injectors 24rd European Conference on Liquid Atomization and Spray Systems - ILASS - Europe 2011 Estoril, Portugal September 2011
- Sauter , W. , Pfeil , J. , Velji , A. , Spicher , U. et al. Application of Particle Image Velocimetry for Investigation of Spray Characteristics of an Outward Opening Nozzle for Gasoline Direct Injection SAE Technical Paper 2006-01-3377 2006 10.4271/2006-01-3377
- Skogsberg , M. , Dahlander , P. , and Denbratt , I. Spray Shape and Atomization Quality of an Outward-Opening Piezo Gasoline DI Injector SAE Technical Paper 2007-01-1409 2007 10.4271/2007-01-1409
- VanDerWege , B. , Han , Z. , Iyer , C. , Muñoz , R. et al. Development and Analysis of a Spray-Guided DISI Combustion System Concept SAE Technical Paper 2003-01-3105 2003 10.4271/2003-01-3105
- Waltner , A. , Lückert , P. , Breitbach , H. , Doll , G. et al. The new V6 petrol engine with direct injection from Mercedes- Benz 31st International Vienna Engine Symposium Wien 2010 1 21
- Waltner , A. , Lückert , P. , Schaupp , U. , Rau , E. et al. Future technology of the spark-ignition engine: Spray- guided direct injection with piezo injector The potential of synthetic fuels to meet future emission regulations. 27st International Vienna Engine Symposium Wien 2006
- Wislocki , K. , Pielecha , I. , Czajka , J. and Maslennikov , D. Evaluation of the Liquid Fuel Spray Parameters Based on Experimental Research and Numerical Simulation for the Piezoelectric Injectors Archives of Transport 23 1 111 121 2011 10.2478/v10174-011-0008-7
- Wislocki , K. , Pielecha , I. , Czajka , J. , and Maslennikov , D. The Influence of Fuel Injection Parameters on the Indexes of Fuel Atomization Quality for a High Pressure Injection SAE Technical Paper 2010-01-1499 2010 10.4271/2010-01-1499
- Wislocki , K. , Pielecha , I. , Czajka , J. , and Stobnicki , P. Experimental and Numerical Investigations into Diesel High-Pressure Spray - Wall Interaction under Various Ambient Conditions SAE Technical Paper 2012-01-1662 2012 10.4271/2012-01-1662