This content is not included in your SAE MOBILUS subscription, or you are not logged in.

A Dual Grid Curved Beam Finite Element Model of Piston Rings for Improved Contact Capabilities

Journal Article
2014-01-1085
ISSN: 1946-3936, e-ISSN: 1946-3944
Published April 01, 2014 by SAE International in United States
A Dual Grid Curved Beam Finite Element Model of Piston Rings for Improved Contact Capabilities
Sector:
Citation: Baelden, C. and Tian, T., "A Dual Grid Curved Beam Finite Element Model of Piston Rings for Improved Contact Capabilities," SAE Int. J. Engines 7(1):156-171, 2014, https://doi.org/10.4271/2014-01-1085.
Language: English

References

  1. Holmberg K. , Andersson P. , and Erdemir A. Global energy consumption due to friction in passenger cars Tribology International 47 221 234 2012 10.1016/j.triboint.2011.11.022
  2. Prescott J. The bending of thin rings Automobile engineer 9 130 295 302 1919
  3. Swift H. W. Elastic deformation of piston rings Engineering 163 161 165 1947
  4. Dragoni E. , and Strozzi A. Analysis of a split ring inserted into a circular housing The Journal of Strain Analysis for Engineering Design 21 2 59 70 1986 10.1243/03093247V212059
  5. Müller R. Zur Frage des Formfüllungsvermögen von Kolbenringen in von der Kreisform abweichenden Bohrungen gleicher Umfangslänge MTZ 31 79 82 1970
  6. Dunaevsky V. V. Analysis of distortions of cylinders and conformability of piston rings Tribology transactions 33 1 33 40 1990 10.1080/10402009008981927
  7. Dunaevsky V. V. Development of conformability model of piston rings with consideration of their three-dimensional torsional distortions and Fourier series representation of cylinder bore geometry SAE Technical Paper 2002-01-3131 2002 10.4271/2002-01-3131
  8. Dunaevsky V. , and Rudzitis J. Clarification of a Semi-Empirical Approach in Piston Ring-Cylinder Bore Conformability Prediction Journal of Tribology 129 2 430 2007 10.1115/1.2647800
  9. Tomanik , E. Piston Ring Conformability in a Distorted Bore SAE Technical Paper 960356 1996 10.4271/960356
  10. Tomanik E. Improved Criterion for Ring Conformability Under Realistic Bore Deformation SAE Technical Paper 2009-01-0190 2009 10.4271/2009-01-0190
  11. Ejakov M. A. , Schock H. J. , and Brombolich L. J. Modeling of Ring Twist For an IC Engine SAE Technical Paper 982693 1998 10.4271/982693
  12. Liu L. , Tian T. , and Rabuté R. Development and Applications of an Analytical Tool for Piston Ring Design SAE Technical Paper 2003-01-3112 2003 10.4271/2003-01-3112
  13. Liu L. , and Tian T. A Three-Dimensional Model for Piston Ring-Pack Dynamics and Blow-By Gas Flow ASME 2004 Internal Combustion Engine Division Fall Technical Conference ICEF2004-0968 2004 10.1115/ICEF2004-0968
  14. Timoshenko S. P. Strength of Materials: Elementary theory and problems Krieger Publishing Company Florida 978-0898746211 93 96 362 384 1976
  15. Greenwood J. A. , and Tripp J. H. The contact of two nominally flat rough surfaces Proceedings of the institution of mechanical engineers 185 1 625 633 1970 10.1243/PIME_PROC_1970_185_069_02
  16. Chen , H. , Li , Y. , and Tian , T. A Novel Approach to Model the Lubrication and Friction between the Twin-Land Oil Control Ring and Liner with Consideration of Micro Structure of the Liner Surface Finish in Internal Combustion Engines SAE Technical Paper 2008-01-1613 2008 10.4271/2008-01-1613
  17. Hu Y. , Cheng H. S. , Arai T. , Kobayashi Y. , and Aoyama S. Numerical simulation of piston ring in mixed lubrication: a nonaxisymmetrical analysis Journal of tribology 116 3 470 478 1994
  18. Press W. H. Numerical recipes 3rd edition: The art of scientific computing Cambridge University Press Cambridge UK 978-0521880688 110 119 2007
  19. Love A. E. H. A Treatise on the Mathematical Theory of Elasticity Fourth Dover Publications New York 978-0486601748 444 450 1927

Cited By