Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

A Numerical Simulation Study on Improving the Thermal Efficiency of a Spark Ignited Engine --- Part 1: Modeling of a Spark Ignited Engine Combustion to Predict Engine Performance Considering Flame Propagation, Knock, and Combustion Chamber Wall ---

Journal Article
2014-01-1073
ISSN: 1946-3936, e-ISSN: 1946-3944
DOI: https://doi.org/10.4271/2014-01-1073
Published April 01, 2014 by SAE International in United States
A Numerical Simulation Study on Improving the Thermal Efficiency of a Spark Ignited Engine --- Part 1: Modeling of a Spark Ignited Engine Combustion to Predict Engine Performance Considering Flame Propagation, Knock, and Combustion Chamber Wall ---
Sector:
Citation: Kikusato, A., Jin, K., and Daisho, Y., "A Numerical Simulation Study on Improving the Thermal Efficiency of a Spark Ignited Engine --- Part 1: Modeling of a Spark Ignited Engine Combustion to Predict Engine Performance Considering Flame Propagation, Knock, and Combustion Chamber Wall ---," SAE Int. J. Engines 7(1):96-105, 2014, https://doi.org/10.4271/2014-01-1073.
Language: English

References

  1. Kawamura , H. , Matsuoka , H. and Hara , S. Construction of Heat-Insulated Engine with Large Heat-Insulation Rate (in Japanese) JSME Transaction, No. 93-0702 4059 4063 1993
  2. Xin , J. , Shih , S. , Itano , E. , and Maeda , Y. Integration of 3D Combustion Simulations and Conjugate Heat Transfer Analysis to Quantitatively Evaluate Component Temperatures SAE Technical Paper 2003-01-3128 2003 10.4271/2003-01-3128
  3. Shih , S. , Itano , E. , Xin , J. , Kawamoto , M. et al. Engine Knock Toughness Improvement Through Water Jacket Optimization SAE Technical Paper 2003-01-3259 2003 10.4271/2003-01-3259
  4. Inagaki , K. , Mizuta , J. , Fuyuto , T. , Hashizume , T. et al. Low Emissions and High-Efficiency Diesel Combustion Using Highly Dispersed Spray with Restricted In-Cylinder Swirl and Squish Flows SAE Int. J. Engines 4 1 2065 2079 2011 10.4271/2011-01-1393
  5. Fujimoto , H. , Yamamoto , H. , Fujimoto , M. , and Yamashita , H. A Study on Improvement of Indicated Thermal Efficiency of ICE Using High Compression Ratio and Reduction of Cooling Loss SAE Technical Paper 2011-01-1872 2011 10.4271/2011-01-1872
  6. Das , S. and Roberts , C. Factors Affecting Heat Transfer in a Diesel Engine: Low Heat Rejection Engine Revisited SAE Technical Paper 2013-01-0875 2013 10.4271/2013-01-0875
  7. Nomura , K. , Tanaka , K. , Sakai , S. , Kusaka , J. and Daisho , Y. Improving Thermal Efficiency of an SI engine by Avoiding Knock Occurrence (in Japanese) JSAE Transaction 42 4 2011
  8. Kikusato , A. , Kusaka , J. and Daisho , Y. A Numerical Study on Evaluating the Performance of a Turbocharged Spark Ignition Natural Gas Engine (in Japanese) JSAE Transaction 44 3 2013
  9. Morel , T. , Rackmil , C. , Keribar , R. , and Jennings , M. Model for Heat Transfer and Combustion In Spark Ignited Engines and its Comparison with Experiments SAE Technical Paper 880198 1988 10.4271/880198
  10. Heywood , J. B. International Combustion Engine Fundamentals McGraw-Hill New York 1988
  11. Halstead , M. P. , Kirsch , L. J. and Quinn , C. P. The autoignition of hydrocarbon fuels at high temperatures and pressures - Fitting of a mathematical model Combustion and Flame 30 45 60 1977
  12. Golovichev , V. I. Compression Ignited Engine Modeling - A Possible “Road Map” in Solving New Problems Lecture for ICE2003 Italy 2003
  13. Morgan , N. , Smallbone , A. , Bhave , A. , Markus , K. et al. Mapping surrogate gasoline compositions into RON/MON space Combustion and Flame 157 1122 1131 2010
  14. Patankar , S. V. Numerical Heat Transfer and Fluid Flow Taylor & Francis 1980
  15. Colburn , A. P. A Method of Correlating Forced Convection Heat Transfer Data and a Comparison with Fluid Friction Int. J. Heat Mass Transfer 7 1359 1384 1964
  16. Dittus , F. W. and Boelter , L. M. K. Heat Transfer in Automobile Radiators of the Tubular Type Int. Comm. Heat Mass Transfer 12 3 22 1985
  17. Enomoto , Y. and Furuhama , S. A Study of the Local Heat Transfer Coefficient on the Combustion Chamber Walls of a 4-Stroke Gasoline Engine (in Japanese) JSME Transaction, No.86-1451A 3835 3843 1987
  18. Chang , J. , Güralp , O. , Filipi , Z. , Assanis , D. et al. New Heat Transfer Correlation for an HCCI Engine Derived from Measurements of Instantaneous Surface Heat Flux SAE Technical Paper 2004-01-2996 2004 10.4271/2004-01-2996
  19. Rakopoulos , C. D. , Giakoumis , E. G. and Rakopoulos , D. C. Study of the short-term cylinder wall temperature oscillations during transient operation of a turbo-charged diesel engine with various insulation schemes Int. J. Eng. Res. 9 177 193 2008

Cited By

Recommended Content

Journal Article A Numerical Simulation Study on Improving the Thermal Efficiency of a Spark Ignited Engine --- Part 2: Predicting Instantaneous Combustion Chamber Wall Temperatures, Heat Losses and Knock ---
Technical Paper Unsteady Convection Model for Heat Release Analysis of IC Engine Pressure Data
Technical Paper Effects of Combustion Chamber Insulation on the Heat Rejection and Thermal Efficiency of Diesel Engines