Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Strain Rate Effect on Forming Limit Diagram for Advanced High Strength Steels

Journal Article
2014-01-0993
ISSN: 1946-3979, e-ISSN: 1946-3987
DOI: https://doi.org/10.4271/2014-01-0993
Published April 01, 2014 by SAE International in United States
Strain Rate Effect on Forming Limit Diagram for Advanced High Strength Steels
Sector:
Citation: Liu, R., Sun, L., Wang, X., Lin, L. et al., "Strain Rate Effect on Forming Limit Diagram for Advanced High Strength Steels," SAE Int. J. Mater. Manf. 7(3):583-587, 2014, https://doi.org/10.4271/2014-01-0993.
Language: English

References

  1. Keeler , S.P. and Backhofen , W.A. Plastic Instability and Fracture in Sheet Stretched over Rigid Punches Transactions of the ASM 56 25 48 1964
  2. Kim , J.H. , Sung , J.H. , Piao , K. and Wagoner , R.H. The Shear Fracture of Dual-Phase Steel International Journal of Plasticity 27 10 1658 1676 2011 10.1016/j.ijplas.2011.02.009
  3. Percy , J.H. and Brown , R.H. The Effect of Strain Rate on the Forming Limit Diagram for Sheet Metal Annals of the CIRP 29 1 151 152 1980 10.1016/S0007-8506(07)61312-2
  4. Jie , M. , Cheng , C.H. , Chan , L.C. and Chowa , C.L. Forming Limit Diagrams of Strain-Rate-Dependent Sheet Metals International Journal of Mechanical Sciences 51 269 275 2009 10.1016/j.ijmecsci.2009.01.007
  5. Kim , S.B. , Huh , H. , Bok , H.H. and Moon , M.B. Forming limit diagram of auto-body steel sheets for high-speed sheet metal forming Journal of Materials Processing Technology 211 851 862 2011 10.1016/j.jmatprotec.2010.01.006
  6. Naka , T. , Torikai , G. , Hino , R. , and Yoshida , F. The Effects of Temperature and Forming Speed on the Forming Limit Diagram for Type 5083 Aluminum-Magnesium Alloy Sheet Journal of Materials Processing Technology 113 648 653 2001
  7. Zhang , C.S. , Leotoing , L. , Guines , D. and Ragneau , E. Theoretical and Numerical Study of Strain Rate Influence on AA5083 Formability Journal of Materials Processing Technology 209 3849 3858 2009 10.1016/j.jmatprotec.2008.09.00
  8. Zhang , C.S. , Leotoing , L. , Guines , D. and Ragneau , E. Experimental and Numerical Study on Effect of Forming Rate on AA5086 Sheet Materials Science and Engineering A A527 967 972 2010 10.1016/j.msea.2009.09.013
  9. Savic , V. and Hector , L. Tensile Deformation and Fracture of Press Hardened Boron Steel using Digital Image Correlation SAE Technical Paper 2007-01-0790 2007 10.4271/2007-01-0790
  10. Savic , V. , Hector , L. , Snavely , K. , and Coryell , J. Tensile Deformation and Fracture of TRIP590 Steel from Digital Image Correlation SAE Int. J. Mater. Manuf. 3 1 246 254 2010 10.4271/2010-01-0444
  11. Coryell , J. , Savic , V. , Hector , L. , and Mishra , S. Temperature Effects on the Deformation and Fracture of a Quenched-and-Partitioned Steel SAE Technical Paper 2013-01-0610 2013 10.4271/2013-01-0610
  12. Li , J. , Carsley , J.E. , Stoughton , T.B. , Hector , L.G. et al. Forming Limit Analysis for Two-Stage Forming of 5182-O Aluminum International Journal of Plasticity 45 21 43 2013 http://dx.doi.org/10.1016/j.ijplas.2012.10.004
  13. GB/T 15825.8-2008, Sheet metal formability and test methods--Part 8: Guidelines for the determination of forming-limit diagrams GB Standards
  14. Abu-Farha , F. , Verma , R. and Hector , L.G. High Temperature Composite Forming Limit Diagrams of Four Magnesium AZ31B Journal of Materials Processing Technology 212 1414 1429 2012 10.1016/j.jmatprotec.2012.01.008

Cited By

Recommended Content

Technical Paper Evaluation of Metal Gainers for Advanced High Strength Steel Flanging
Technical Paper Optimal Production Trimming Process for AHSS Sheared Edge Stretchability Improvement
Technical Paper Edge Formability and Material Characterization of Hot-Rolled Multiphase Steels