This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
An Investigation of Heat Generation Due To Friction Using Finite Element Method
Technical Paper
2014-01-0954
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Most of failures in automotive friction clutches occur due to the excessive heat generated between the contact surfaces during the slipping period; for this reason, the accurate calculation of the heat generation during the slipping is considered an essential item in the successful design process to avoid the failures due to the high thermal stresses. A finite element technique has been used to study the temperature field, the heat generation and the contact pressure distribution when friction disc slides over the steel disc. Analysis has been completed using a three dimensional model to simulate the thermo-structural coupling in automotive clutches. ANSYS software has been used to perform the numerical calculation in this paper.
Recommended Content
Citation
Abdullah, O. and Schlattmann, J., "An Investigation of Heat Generation Due To Friction Using Finite Element Method," SAE Technical Paper 2014-01-0954, 2014, https://doi.org/10.4271/2014-01-0954.Also In
References
- Al-Shabibi Abdullah M. and Barber James R. Transient Solution of the Unperturbed Thermoelastic Contact Problem Journal of Thermal Stresses 32 3 226 243 February 2009
- Lee Choon Yeol , Chung Il Sup , Chai Young Suck Finite Element Analysis of an Automobile Clutch System J. Key Engineering Materials 353-358 2707 2711 September 2007
- Zhang Jin-Le , Ma Biao , Zhang Ying-Feng and Li He-Yan Simulation and Experimental Studies on the Temperature Field of a Wet Shift Clutch during one Engagement International Conference of Computational Intelligence and Software Engineering (CiSE) IEEE 2009
- Abdullah Oday I. and Schlattmann Josef The Effect of Disc Radius on Heat Flux and Temperature Distribution in Friction Clutches J. of Advanced Materials Research 505 154 164 2012
- Abdullah Oday I. and Schlattmann Josef Finite Element Analysis of Dry Friction Clutch with Radial and Circumferential Grooves Proceeding of World Academy of Science, Engineering and Technology Conference Paris 2012 1279 1291
- Abdullah Oday I. and Schlattmann Josef Effect of Band Contact on the Temperature Distribution for Dry Friction Clutch Proceeding of World Academy of Science, Engineering and Technology Conference Berlin 2012 167 177
- Abdullah Oday I. and Schlattmann Josef The Correction Factor for Rate of Energy Generated in the Friction Clutches under Uniform Pressure Condition J. of Advances in Theoretical and Applied Mechanics 5 6 277 290 2012
- Abdullah Oday I. and Schlattmann Josef Finite Element Analysis of Temperature Field in Automotive Dry Friction Clutch J. of Tribology in Industry 34 4 206 216 2012
- Abdullah Oday I. , Schlattmann Josef and Al-Shabibi Abdullah M. Transient Thermoelastic Analysis of Multi-disc Clutches Proceedings of 9 th Arnold Tross Colloquium Hamburg June 2013
- Abdullah Oday I. and Schlattmann Josef Stresses and Deformations Analysis of a Dry Friction Clutch System J. of Tribology in Industry 35 2 155 162 2013
- ANSYS Contact Technology Guide, ANSYS Release 14.0 Documentation ANSYS, Inc.
- Mohr GA A Contact Stiffness Matrix for Finite Element Problems Involving External Elastic Restraint Journal of Computers & Structures 12 2 189 191 August 1980
- Wriggers , P. , and Miehe C. Contact constraints within coupled thermomechanical analysis-a finite element model J. Computer Methods in Applied Mechanics and Engineering 113 3 1994 301 319