This content is not included in your SAE MOBILUS subscription, or you are not logged in.
Evaluation of Biofidelity of Side Impact Computational Surrogates (ES-2re, WorldSID, GHBMC)
ISSN: 0148-7191, e-ISSN: 2688-3627
Published April 1, 2014 by SAE International in United States
Annotation ability available
The goal of this study was to evaluate the biofidelity of the three computational surrogates (GHBMC model, WorldSID model, and the FTSS ES-2re model) under the side impact rigid wall sled test condition. The responses of the three computational surrogates were compared to those of post mortem human surrogate (PMHS) and objectively evaluated using the correlation and analysis (CORA) rating method. Among the three computational surrogates, the GHBMC model showed the best biofidelity based on the CORA rating score (GHBMC =0.65, WorldSID =0.57, FTSS ES-2re =0.58). In general, the response of the pelvis of all the models showed a good correlation with the PMHS response, while the response of the shoulder and the lower extremity did not. In terms of fracture prediction, the GHBMC model overestimated bone fracture. The results of this study can be effectively utilized in a research that mainly relies on the response of computational surrogates without experimental tests, especially initial development stage of countermeasures for occupant protection from vehicular accidents.
CitationPark, G., Kim, T., Crandall, J., Svendsen, A. et al., "Evaluation of Biofidelity of Side Impact Computational Surrogates (ES-2re, WorldSID, GHBMC)," SAE Technical Paper 2014-01-0541, 2014, https://doi.org/10.4271/2014-01-0541.
- National Highway Traffic Safety Administration, “Anthropomorphic Test Devices; ES-2re Side Impact Crash Test Dummy 50th Percentile Adult Male”, 49 CFR Part 572, Docket No. NHTSA-2004-25441, 2006
- Rhule, Heather, Moorhouse Kevin, Donnelly Bruce, and Stricklin Jim. “Comparison of WorldSID and ES-2re Biofidelity Using an Updated Biofidelity Ranking System.” In Proceedings of the 21th Enhanced Safety of Vehicles Conference. 2009.
- Scherer, Risa, Bortenschlager Klaus, Akiyama Akihiko, Tylko Suzanne, Hartlieb Markus, and Harigae Takeshi. “WorldSID production dummy biomechanical responses.” In Proceedings of the 21th Enhanced Safety of Vehicles Conference. 2009.
- Liu, Yi, Zhu Fuchun, Wang Zhenwen, and van Ratingen Michiel. “Side Impact Injury Prediction with FE Simulations of the New Advanced World SID FE Dummy Models.” In Proceedings of the 20th International Technical Conference on the Enhanced Safety of Vehicles (EVS), Washington, DC. 2007.
- Uriu, T., Yasuki, T., Fukushima, S., and Kuwahara, M., “Development of Side Impact Dummy FE Models using Reverse Engineering,” SAE Technical Paper 2012-01-0091, 2012, doi:10.4271/2012-01-0091.
- Fonseka, Sanjaya, and Van den Bergh Gaetan. “Development of a doe/optimization cae method to simultaneously improve side impact occupant restraint system performance for multiple test modes.” In The 20th International Technical Conference on the Enhanced Safety of Vehicles Conference (ESV), Lyon, France. 2007.
- Vavalle, Nicholas A., Moreno Daniel P., Rhyne Ashley C., Stitzel Joel D., and Gayzik F. Scott. “Lateral impact validation of a geometrically accurate full body finite element model for blunt injury prediction.” Annals of biomedical engineering, 41(3):497-512, 2013, doi:10.1007/s10439-012-0684-3.
- Beillas P, and Berthet F, “Performance of a 50th percentile abdominal model for impact: effect of size and mass”, European Society of Biomechanics Conference, 2012.
- DeWit, Jennifer A., and Cronin Duane S.. “Cervical spine segment finite element model for traumatic injury prediction.” Journal of the mechanical behavior of biomedical materials 10:138-150, 2012, doi:10.1016/j.jmbbm.2012.02.015.
- Li, Zuoping, Kindig Matthew W., Kerrigan Jason R., Untaroiu Costin D., Subit Damien, Crandall Jeff R., and Kent Richard W.. “Rib fractures under anterior-posterior dynamic loads: Experimental and finite-element study.” Journal of biomechanics. 43(2):228-234,2010, doi:10.1016/j.jbiomech.2009.08.040.
- Shin, Jaeho, Yue Neng, and Untaroiu Costin D.. “A finite element model of the foot and ankle for automotive impact applications.” Annals of biomedical engineering. 40(12):2519-2531, 2012, doi:10.1007/s10439-012-0607-3.
- Crandall, J. R., Bose D., Forman J., Untaroiu C. D., Arregui-Dalmases C., Shaw C. G., and Kerrigan J. R.. “Human surrogates for injury biomechanics research.” Clinical Anatomy, 24(3):362-371, 2011, doi:10.1002/ca.21152.
- Lessley, David, Shaw Greg, Parent Daniel, Arregui-Dalmases Carlos, Kindig Matthew, Riley Patrick, Purtsezov Sergey et al. “Whole-body response to pure lateral impact.” Stapp car crash journal, 54:289-336, 2010.
- LS-DYNA Keyword User's Manual, Version 971, Livermore Software Technology Corporation.
- Kim, T., Park, G., Crandall, J. R., et al. “Evaluation of biofidelity of ES-2re and WorldSID under side impact test conditions with and without airbag”, submitted.
- Robbins DH, “Anthropometric specifications for midsized male dummy, volume 2”, UMTRI-83-53-2, UMTRI, 1983.
- National Highway Traffic Safety Administration, “Procedures for Assembly, Disassembly and Inspection (PADI) of the EuroSID-2re 50th Percentile Adult Male Side Impact Crash Test Dummy”, NHTSA-2008-0111-0002, 2008
- ISO/TC22/SC12, “Road vehicles -- Design and performance specifications for the WorldSID 50th percentile male side impact dummy -- Part 4: User's manual”, ISO 15830-4, 2013.
- Eppinger, R., Marcus, J., and Morgan, R., “Development of Dummy and Injury index for NHTSA's Thoracic Side Impact Protection Research Program,” SAE Technical Paper 840885, 1984, doi:10.4271/840885.
- SAE International Surface Vehicle Information Report, “Sign Convention for Vehicle Crash Testing,” SAE Standard J1733, Issued Dec. 1994.
- Gehre, Christian, Gades Heinrich, and Wernicke Philipp. “Objective rating of signals using test and simulation responses.” In 21st International Technical Conference on the Enhanced Safety of Vehicles Conference (ESV), 2009.
- Untaroiu, C. D., Yue, N., Shin, J. (2012), A Finite Element Model of the Lower Limb for Simulating Automotive Impacts, Annals of Biomedical Engineering, 1573-9686. doi:10.1007/s10439-012-0687-0.
- Yue, N., Shin, J., and Untaroiu, C., “Development and Validation of an Occupant Lower Limb Finite Element Model,” SAE Technical Paper 2011-01-1128, 2011, doi:10.4271/2011-01-1128.
- Vavalle, N. A., Moreno, D. P., Rhyne, A. C., Stitzel, J. D., Gayzik F. S., “Lateral impact validation of a geometrically accurate full body finite element model for blunt injury prediction”, Annals of biomedical engineering, 41(3), 497-512, doi:10.1007/s10439-012-0684-3.
- Bolte, John H, Hines Margaret H, Herriott Rodney G, McFadden Joseph D, and Donnelly Bruce R. 2003. “Shoulder Impact Response and Injury Due to Lateral and Oblique Loading.” Stapp Car Crash Journal, 47, 35-53.
- Compigne, Sabine, Caire Yves, Quesnel Thierry, and Verries Jean-Pierre. 2004. “Non-Injurious and Injurious Impact Response of the Human Shoulder Three-Dimensional Analysis of Kinematics and Determination of Injury Threshold.” Stapp Car Crash Journal, 48, 89-123.
- Subit D, Duprey S, Lau S, Guillemot H, Lessley D, Kent R. “Response of the human torso to lateral and oblique constant-velocity impacts”, Ann Adv Automot Med. 54:27-40, 2010