This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Modeling and Experimental Validation of the Solenoid Valve of a Common Rail Diesel Injector
Technical Paper
2014-01-0195
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Common rail diesel injectors are multi-domain systems with complex interactions between mechanical, hydraulic and electrical components. For a detailed understanding of the dynamic behavior and for further performance improvements, often simulation models are indispensable. Injection dynamics is influenced by the opening and closing dynamics of the solenoid valve. Therefore an accurate simulation model of the solenoid valve is necessary for injector simulations. The objective of this study is to present a validated simulation model of the solenoid valve of a commercially available common rail diesel injector.
For modeling the solenoid valve, a division into a mechanical and a magnetic submodel is done. The mechanical submodel is made up by a two mass system representing the pin and the armature of the solenoid valve. Contacts are modeled using linear-elastic spring-damper elements and viscous damping is considered for friction representation. The magnetic submodel is based on experimentally gained static magnetic force data. Therefore a test bench is presented, that allows to measure magnetic force-current characteristics of the solenoid at operation relevant air-gap values. Investigations by the author have shown, that transient effects of the solenoid during switching on and off the supply current cannot be neglected. In this study a semi-empirical approach is proposed to account for these transient effects, which are mainly caused by eddy-currents.
In order to validate the model of the solenoid valve, dynamic displacement measurements of the pin are carried out. Comparisons between simulated and measured pin displacement data show excellent agreement.
Recommended Content
Authors
Citation
Huber, B. and Ulbrich, H., "Modeling and Experimental Validation of the Solenoid Valve of a Common Rail Diesel Injector," SAE Technical Paper 2014-01-0195, 2014, https://doi.org/10.4271/2014-01-0195.Also In
References
- Mollenhauer , K. and Tschöke , H. Handbuch Dieselmotoren Springer Berlin Heidelberg 3-54072-164-9 159 180 2007
- Baumann , J. Einspritzmengenkorrektur in Common-Rail-Systemen mit Hilfe magnetoelastischer Drucksensoren Univ.-Verlag Karlsruhe 3-86644-064-2 2006
- Seebode , J. Dieselmotorische Einspritzratenformung unter dem Einfluss von Druckmodulation und Nadelsitzdrosselung Ph.D. thesis Mechanical Engineering Department, Universität Hannover Hannover 2004
- Skiba , S. and Melbert , J. Dosing Performance of Piezo Injectors and Sensorless Closed-Loop Controlled Solenoid Injectors for Gasoline Direct Injection SAE Int. J. Engines 5 2 330 335 2012 10.4271/2012-01-0394
- Shinohara , Y. , Takeuchi , K. , Herrmann , O.E. , and Laumen , H.J. Common-Rail-Einspritzsysteme mit 3000 Bar MTZ - Motorentechnische Zeitschrift 72 1 10 15 2011 10.1365/s35146-011-0005-7
- Glasmachers , H. Elektronische Verfahren zur Optimierung der Dosiereigenschaften von Kfz-Magneteinspritzventilen Shaker Verlag Aachen 978-3-8322-8351-3 2009
- Borchsenius , F. , Stegemann , D. , Gebhardt , X. , Jagani , J. , and Lyubar , A. Simulation von Diesel-Common-Rail-Einspritzsystemen MTZ - Motorentechnische Zeitschrift 71 6 436 441 2010 10.1007/BF03225583
- Bianchi , G. , Falfari , S. , Pelloni , P. , Kong , S. et al. Numerical Analysis of High-Pressure Fast-Response Common Rail Injector Dynamics SAE Technical Paper 2002-01-0213 2002 10.4271/2002-01-0213
- Keskinen , K. , Kaario , O. , Tilli , A. , Hulkkonen , T. et al. Improving the Accuracy of 1-D Fuel Injection Modeling SAE Technical Paper 2012-01-1256 2012 10.4271/2012-01-1256
- Payri , R. , Climent , H. , Salvador , F. , and Favennec , A. Diesel Injection System Modelling. Methodology and Application for a First-Generation Common Rail System Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 218 1 81 91 2004 10.1243/095440704322829191
- Seykens , X. , Somers , L. , and Baert , R. Diesel Injection System Modelling. Methodology and Application for a First-Generation Common Rail System Journal of Middle European Construction and Design of Cars (MECCA) 111 30 39 2005
- Chung , N. , Oh , B. , and Sunwoo , M. Modelling and Injection Rate Estimation of Common-Rail Injectors for Direct-Injection Diesel Engines Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 222 6 1089 1101 2008 10.1243/09544070jauto647
- Shamdani , A. , Shamekhi , A. , Ziabasharhagh , M. , and Aghanajafi , C. Modeling and Simulation of a Diesel Engine Common Rail Injector in Matlab/Simulink 14th Annual (International) Mechanical Engineering Conference Isfahan May 2006
- Bianchi , G. , Pelloni , P. , Filicori , F. , and Vannini , G. Optimization of the Solenoid Valve Behavior in Common-Rail Injection Systems SAE Technical Paper 2000-01-2042 2000 10.4271/2000-01-2042
- Dongiovanni , C. , and Coppo , M. Accurate Modelling of an Injector for Common Rail Systems Fuel Injection 2010 10.5772/9728
- Kallenbach , E. , Eick , R. , Quendt , P. , Strohla , T. , Feindt , K. et al. Elektromagnete: Grundlagen, Berechnung, Entwurf und Anwendung Vieweg+Teubner Verlag Wiesbaden 3-83480-968-3 125 160 2012
- Wang , Y. , Megli , T. , Haghgooie , M. , Peterson , K. et al. Modeling and Control of Electromechanical Valve Actuator SAE Technical Paper 2002-01-1106 2002 10.4271/2002-01-1106
- Chung , S.K. , Koch , C.R. , and Lynch , A.F. Flatness-Based Feedback Control of an Automotive Solenoid Valve Control Systems Technology, IEEE Transactions on 15 2 394 401 2007 10.1109/TCST.2006.886440
- Ando , R. , Koizumi , M. , and Ishikawa , T. Development of a Simulation Method for Dynamic Characteristics of Fuel Injector Magnetics, IEEE Transactions on 37 5 3715 3718 2001 10.1109/20.952697
- Brauer , J.R. Magnetic Actuators and Sensors John Wiley & Sons New Jersey 0-47173-169-2 39 51 125 143 2006
- Wiedemann , D. Permanent Magnet Reluctance Actuators for Vibration Testing Ph.D. thesis Mechanical Engineering Department, Technische Universität München Munich 2013