This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Blanks Physical Parameters Optimization for Automotive Panels Deep Drawing
Technical Paper
2013-36-0204
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
This work conducted an optimization in sheet metal blank's sizes for cold pressing automotive parts, comparing dimensional characteristics of automotive hood outer panels deep drawn with commonly used blank sizes for this process. As a result, it was possible to suggest modifications to smaller blank sizes, accordingly to the improvement accomplished in this work. The experimental study was conducted from observations in part's superficial aspects after its deep drawing process, which was realized in a commonly used tooling for automotive industry, with a blank's width reduction for the suggested case. The results showed a cost reduction opportunity based in this optimization.
Authors
Citation
Viveiros, F., Colosio, M., and Rossini, E., "Blanks Physical Parameters Optimization for Automotive Panels Deep Drawing," SAE Technical Paper 2013-36-0204, 2013, https://doi.org/10.4271/2013-36-0204.Also In
References
- ALBUT , A. Influence of the friction coeficient on springback effect of a u-shaped part manufactured by tailor welded stripes U.p.b. sci. bull. Romania 68 28 36 01 ago. 2006
- ARA⁄JO , Daniele Dias Estudo do Springback na conformação mecânica de segmentos toroidais em chapas grossas 138 f. Dissertação (Mestrado) - Curso de Engenharia de Materiais Universidade Federal de Ouro Preto Ouro Preto 2007
- BANABIC , D. et al. Formability of Metallic Materials Stuttgart Springer 2000 334
- BOTAS , José Lourenço Sistema inteligente aplicado a ensaios de avaliação de estampabilidade 60 Monografia (Mestrado) - Curso de Engenharia Elétrica Universidade Federal de Minas Gerais Belo Horizonte 2001
- CARVALHO , Enéas Gonçalves de Inovação tecnológica na indústria automobilística: características e evolução recente Economia e sociedade Campinas 17 429 461 01 dez. 2008
- FIRAT , Mehmet An analysis of sheet drawing characteristics with drawbead elements Computational Materials Science Adapazari 41 266 274 16 abr. 2007
- GOEL , Amit Blank optimization in sheet metal forming using finite element simulation 83 Monografia (Mestrado em Engenharia Mecânica) - Texas A&M University College Station 2004
- HAUS , Siedro Augusto 92 f Dissertação (Mestrado) - Curso de Engenharia de Mecânica Universidade Federal do Paraná Curitiba 2011
- MEINDERS , T. et al. The implementation of an equivalent drawbead model in a finite-element code for sheet metal forming Journal of materials processing technology Netherlands 234 244 1997
- MURALI , A. ; GOPAL , B. ; RAJADURAI , C. Analysis of influence of draw bead location and profile in hemispherical cup forming International journal of engineering and technology India 2 01 ago. 2010
- PLAUT , Ronald Lesley Estampabilidade de chapas: ensaios e aplicações II Workshop Sobre Textura e Relações de Orientação São Paulo 417 460 02 out. 2003