This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Development of Cylinder Block and Cylinder Head of Four Valve/Cylinder OHV Engine for Future High Performance and Durability Needs
Technical Paper
2013-26-0130
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
In the growing automobile world, every commercial vehicle manufacturer upgrades their product from their existing product to meet world market demand for high power engine with high torque, most fuel efficient, BS-IV and BS-V emission norms and less cost. In an Engine cylinder block and cylinder head are among the critical parts need to be modified to upgrade the existing engine platform. The VE4101 Engine is a massive 3.8 l 4 Cyl 16 valve engine based on the E483 4 cyl 8 valve engine, which is currently being mass produced in VECV, India. This engine cylinder block and cylinder head are designed with key features such as capable for high peak firing pressure, rigid load structure, curvy envelope and ribs to reduce NVH, light weight 2 split top box manufacturing method. Key strategy is used such as less capital investment in purchasing machines, no/less alteration in current machining and assembly line. The block and head design made with the help of CAD, CAE, and simulation software to perform required design and analysis results. Test results were correlated.
Authors
Citation
Smith, A., Rajauria, S., and Agarwal, S., "Development of Cylinder Block and Cylinder Head of Four Valve/Cylinder OHV Engine for Future High Performance and Durability Needs," SAE Technical Paper 2013-26-0130, 2013, https://doi.org/10.4271/2013-26-0130.Also In
References
- Heywood J B Internal Combustion Engine Fundamentals McGraw-Hill Book Co. New York 1988
- Bogart H Automotive Cylinder Block Materials - Cast Iron SAE Technical Paper 610128 1961 10.4271/610128
- Onezawa T and Kanda H Analysis of Cavitation Erosion on Cylinder Liner and Cylinder Block SAE Technical Paper 850401 1985 10.4271/850401
- Nagayama I , Araki , Y , Kakuta K and Usuba Y Engine Noise Reduction by Structural Study of Cylinder Block SAE Technical Paper 800441 1980 10.4271/800441
- Van Camp H Stress Analysis of Aluminum V-8 Diesel Cylinder Block SAE Paper No. 610020 1961 10.4271/610020
- Osman A Design Concept and Manufacturing Method of a Lightweight Deep Skirt Cylinder Block SAE Technical Paper 2012-01-0406 2012 10.4271/2012-01-0406
- Hamm , T. , Rebbert , M. , Ecker , H. , and Grafen , M. Cylinder Head Design for High Peak Firing Pressures SAE Int. J. Engines 1 1 746 755 2009 10.4271/2008-01-1196
- Gale N Diesel Engine Cylinder Head Design: The Compromises and the Techniques SAE Technical Paper 900133 1990 10.4271/900133
- Sunayama N Heat Transfer/Thermal Analysis for Cylinder Head SAE Technical Paper 910301 1991 10.4271/910301
- Megel , M. , Westmoreland , B. , Jones , G. , Phillips , F. et al. Development of a Structurally Optimized Heavy Duty Diesel Cylinder Head Design Capable of 250 Bar Peak Cylinder Pressure Operation SAE Int. J. Engines 4 3 2736 2755 2011 10.4271/2011-01-2232
- Woods M and Earnshaw A Use of Predictive Analysis to Optimise the Design of a Novel Cylinder Head Cooling Arrangement SAE Technical Paper 2001-01-1210 2001 10.4271/2001-01-1210
- Osterwisch C , DeJack M and Smolnikar M CAE Process for Developing Cylinder Head Design Including Statistical Correlation and Shape Optimization SAE Technical Paper 2010-01-0494 2010 10.4271/2010-01-0494
- Kim B , Chang H , Lee K and Kim C Improvement of Durability in HSDI Diesel Cylinder Head SAE Technical Paper 2005-01-0655 2005 10.4271/2005-01-0655
- Nozue Y , Satoh H and Umetani S Thermal Stress and Strength Prediction of Diesel Engine Cylinder Head SAE Technical Paper 830148 1983 10.4271/830148