This content is not included in your SAE MOBILUS subscription, or you are not logged in.
Cold Start Thermal Management with Electrically Heated Catalyst: A Way to Lower Fuel Consumption
ISSN: 0148-7191, e-ISSN: 2688-3627
Published September 08, 2013 by SAE International in United States
Annotation ability available
Recent engine development has been mainly driven by increased specific volumetric power and especially by fuel consumption minimization. On the other hand the stringent emission limits require a very fast cold start that can be reached only using tailored catalyst heating strategy.
This kind of thermal management is widely used by engine manufactures although it leads to increased fuel consumption. This fuel penalty is usually higher for high power output engines that have a very low load during emission certification cycle leading to very low exhaust gas temperature and, consequently, the need of additional energy to increase the exhaust gas temperature is high.
An alternative way to reach a fast light off minimizing fuel consumption increase is the use of an Electrical Heated Catalyst (EHC) that uses mechanical energy from the engine to generate the electrical energy to heat up the catalyst. Following this thermal management strategy the energy input can be tailored according to the component need and the energy loss in the system can be minimized. Moreover, the efficiency of such systems can be further optimized using for example brake energy recuperation or advanced thermal management.
The present work describes the different engine management strategies tested by Ferrari to find the best compromise between fuel consumption and emission reduction.
CitationPresti, M., Pace, L., Poggio, L., and Rossi, V., "Cold Start Thermal Management with Electrically Heated Catalyst: A Way to Lower Fuel Consumption," SAE Technical Paper 2013-24-0158, 2013, https://doi.org/10.4271/2013-24-0158.
- Johnson , T. Diesel Emissions in Review SAE Int. J. Engines 4 1 143 157 2011 10.4271/2011-01-0304
- Hanel , F. , Otto , E. , and Brück , R. Electrically Heated Catalytic Converter (EHC) in the BMW ALPINA B12 5.7 Switch-Tronic SAE Technical Paper 960349 1996 10.4271/960349
- Hanel , F. , Otto , E. , Brück , R. , Nagel , T. et al. Practical Experience with the EHC System in the BMW ALPINA B12 SAE Technical Paper 970263 1997 10.4271/970263
- Wiartalla A. , Severin C. , Rosefort Y. , Kemper H. , FEV Motorentechnik GmbH; Kwee H. Lehrstuhl für Verbrennungskraftmaschinen, RWTH Aachen Diesel Hybrid and Exhaust Aftertreatment - Synergies and Optimization Potentials MinNox Berlin June 2008
- Maus W. , Brueck R. Emitec GmbH Die Zukunft der heterogenen Katalyse im Automobil: Turbulente Katalysatoren für Otto- und Diesel-Anwendungen 26. Internationales Wiener Motorensymposium 2005
- Hallgren , B. and Heywood , J. Effects of Substantial Spark Retard on SI Engine Combustion and Hydrocarbon Emissions SAE Technical Paper 2003-01-3237 2003 10.4271/2003-01-3237
- Eng , J. The Effect of Spark Retard on Engine-out Hydrocarbon Emissions SAE Technical Paper 2005-01-3867 2005 10.4271/2005-01-3867