Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Impact on Performance, Emissions and Thermal Behavior of a New Integrated Exhaust Manifold Cylinder Head Euro 6 Diesel Engine

Journal Article
2013-24-0128
ISSN: 1946-3936, e-ISSN: 1946-3944
DOI: https://doi.org/10.4271/2013-24-0128
Published September 08, 2013 by SAE International in United States
Impact on Performance, Emissions and Thermal Behavior of a New Integrated Exhaust Manifold Cylinder Head Euro 6 Diesel Engine
Sector:
Citation: D'Ambrosio, S., Ferrari, A., Spessa, E., Magro, L. et al., "Impact on Performance, Emissions and Thermal Behavior of a New Integrated Exhaust Manifold Cylinder Head Euro 6 Diesel Engine," SAE Int. J. Engines 6(3):1814-1833, 2013, https://doi.org/10.4271/2013-24-0128.
Language: English

References

  1. Regulation (EC) No. 443/2009, “Emission Performance Standards for New Passenger Cars as part of the Community's Integrated Approach to Reduce CO 2 Emissions from Light-Duty Vehicles European Parliament and Council 23 th April 2009
  2. Regulation (EC) No. 715/2007, “On type approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information”, 20 th June 2007, and following amendments: Regulation (EC) No. 692/2008, Regulation (EC) No. 595/2009, Regulation (EU) No. 566/2011
  3. Turner , J. , Pearson , R. , Curtis , R. , and Holland , B. Improving Fuel Economy in a Turbocharged DISI Engine Already Employing Integrated Exhaust Manifold Technology and Variable Valve Timing SAE Technical Paper 2008-01-2449 2008 10.4271/2008-01-2449
  4. Balding , A. , and Coltman , D. 2007 The Lotus Integrated Exhaust Manifold Lotus 22 September October 2007
  5. Kuhlbach , K. , Mehring , J. , Borrmann , D. , and Friedfeldt , R. 2009 Cylinder Head with Integrated Exhaust Manifold for Downsizing Concepts MTZ 04 2009 70 12 17
  6. Mercury Marine USA The Cylinder-Head Verado www.iffa.it
  7. Turner , J. , Pearson , R. , Curtis , R. , and Holland , B. Effects of Cooled EGR Routing on a Second-Generation DISI Turbocharged Engine Employing an Integrated Exhaust Manifold SAE Technical Paper 2009-01-1487 2009 10.4271/2009-01-1487
  8. Meda , L. , Shu , Y. , and Romzek , M. Exhaust System Manifold Development SAE Technical Paper 2012-01-0643 2012 10.4271/2012-01-0643
  9. Taylor , J. , Fraser , N. , and Wieske , P. Water Cooled Exhaust Manifold and Full Load EGR Technology Applied to a Downsized Direct Injection Spark Ignition Engine SAE Int. J. Engines 3 1 225 240 2010 10.4271/2010-01-0356
  10. Deng , B. , Liu , J. , Feng , R. , and Zhang , D. The Fluid Induced Vibration Analysis on an Integrated Exhaust Manifold SAE Technical Paper 2013-01-0937 2013 10.4271/2013-01-0937
  11. Van Basshuysen , R. , and Schafer , F. Internal Combustion Engine Handbook Society of Automotive Engineers, Inc. Warrendale, PA 978-0-7680-1139-5 2004 10.4271/R-345
  12. Kojima , S. Development of High-Performance and Low-Emission Gasoline Engine SAE Technical Paper 2008-01-0608 2008 10.4271/2008-01-0608
  13. Heiduk , T. , Dornhofer , R. , Eiser , A. , Grigo , M. , Pelzer , A. , and Wurms , R. 2011 The New Generation of the R4 TFSI Engine from Audi 32th Vienna Motoren Symposium 2011
  14. Antonioli , P. , Boretto , G. , Frank , R.M. , Golisano , R. , Rovatti , G. , Scotti , M. , and Weßlau , M. 2013 The first of a new generation of diesel engines from General Motors: the efficient and powerful 1.6 liter Euro6 Midsize Diesel Engine 34 th Vienna Motoren Symposium 2013
  15. Potter , M. A. , and Vassallo , A. 2012 Synergistic integration of commercially-available technologies for highly-efficient diesel engines for passenger car application Proceedings of 2012 Thiesel Conference Valencia
  16. Frottier , C. , Riess , M. , Sens , M. , Friedrich , I. , and Lang , O. 2012 Numerical Analysis of the Potential of a Water cooled Exhaust Manifold on Diesel and Gasoline Engines International Journal of Automotive Engineering 3 115 123
  17. Galindo , J. , Lujan , J. M. , Serrano , J. R. , Dolz , V. , and Guilan , S. 2004 Design of an Exhaust Manifold to Improve Transient Performance of a High-speed Turbocharged Diesel Engine Experimental Thermal and Fluid Science 28 863 875
  18. d'Ambrosio , S. , and Ferrari , A. 2012 Diesel Injector Coking: Optical-Chemical Analysis of Deposits and Influence on Injected Flow-Rate, Fuel Spray and Engine Performance Journal of Engineering for gas Turbines and Power , Transactions of the ASME 134 6 062801 0742-4795
  19. Council Directive of 16 December 1980 on the approximation of the laws of the Member States relating to the engine power of motor vehicles (80/1269/EEC) and following amendments
  20. Heywood , J. B. Internal Combustion Engine Fundamentals McGraw-Hill International Editions 1988
  21. Watson , N. , Janota , M.S. Turbocharging the Internal Combustion Engine Palgrave MacMillan 1982
  22. Jääskeläinen , H. , and Khair , M. K. 2012 Turbocharger Fundamentals www.dieselnet.com
  23. Catania , A. E. , Ferrari , A. , and Spessa , E. 2008 Temperature Variations in the Simulation of High-Pressure Injection System Transient Flows under Cavitation Elsevier Press International Journal of Heat and Mass Transfer 51 2090 2107
  24. d'Ambrosio , S. , Finesso , R. , Spessa , E. Calculation Of Mass Emissions, Oxygen Mass Fraction And Thermal Capacity Of The Inducted Charge In SI And Diesel Engines From Exhaust And Intake Gas Analysis Fuel 90 1 152 166 2011 Elsevier
  25. d'Ambrosio , S. , Ferrari , A. , Spessa , E. Analysis of the EGR System Performance in Modern Diesel Engines Proceedings of the ASME 2012 IC Engine Division Spring Technical Conference Journal of Engineering for Gas Turbines and Power
  26. Heisler , H. 2003 Advanced Engine Technology SAE International

Cited By

Recommended Content

Technical Paper Compressed Air Technology in Idling Mode of a Diesel Engine
Technical Paper Development and Application of a New Mass Spectrometer Based Measurement System for Fast Online Monitoring of Oil Emission in the Raw Exhaust Gas of Combustion Engines
Technical Paper The CAE Analysis of a Cylinder Head Water Jacket Design for Engine Cooling Optimization