Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Experimental Characterization of the Geometrical Shape of ks-hole and Comparison of its Fluid Dynamic Performance Respect to Cylindrical and k-hole Layouts

Journal Article
2013-24-0008
ISSN: 1946-3936, e-ISSN: 1946-3944
DOI: https://doi.org/10.4271/2013-24-0008
Published September 08, 2013 by SAE International in United States
Experimental Characterization of the Geometrical Shape of ks-hole and Comparison of its Fluid Dynamic Performance Respect to Cylindrical and k-hole Layouts
Sector:
Citation: Brusiani, F., Bianchi, G., and Di Gioia, R., "Experimental Characterization of the Geometrical Shape of ks-hole and Comparison of its Fluid Dynamic Performance Respect to Cylindrical and k-hole Layouts," SAE Int. J. Engines 6(3):1553-1565, 2013, https://doi.org/10.4271/2013-24-0008.
Language: English

References

  1. Mahr , B. Future and Potential of Diesel Injection Systems THIESEL 2002 Conference on Thermo- and Fluid-Dynamic Processes in Diesel Engines
  2. Bianchi , G. , Falfari , S. , Brusiani , F. , Pelloni , P. et al. Numerical Investigation of Critical Issues in Multiple-Injection Strategy Operated by a New C.R. Fast-Actuation Solenoid Injector SAE Technical Paper 2005-01-1236 2005 10.4271/2005-01-1236
  3. Bianchi , G. , Falfari , S. , Brusiani , F. , Pelloni , P. et al. Advanced Modelling of a New Diesel Fast Solenoid Injector and Comparison with Experiments SAE Technical Paper 2004-01-0019 2004 10.4271/2004-01-0019
  4. Mulemane , A. , Han , J. , Lu , P. , Yoon , S. et al. Modeling Dynamic Behavior of Diesel Fuel Injection Systems SAE Technical Paper 2004-01-0536 2004 10.4271/2004-01-0536
  5. Payri , F. , Margot , X. , Patouna , S. , Ravet , F. et al. A CFD Study of the Effect of the Needle Movement on the Cavitation Pattern of Diesel Injectors SAE Technical Paper 2009-24-0025 2009 10.4271/2009-24-0025
  6. Som , S. , Aggarwal , S. , El-Hannouny , E. , and Longman , D. Investigation of nozzle flow and cavitation characteristics in a diesel injector Journal of Engineering for Gas Turbines and Power 132 4 2010
  7. NISHIDA , K. , ZHANG , W. , and MANABE , T. Effects of Micro-Hole and Ultra-High Injection Pressure on Mixture Properties of D.I. Diesel Spray SAE Technical Paper 2007-01-1890 2007 10.4271/2007-01-1890
  8. Blessing , M. , König , G. , Krüger , C. , Michels , U. et al. Analysis of Flow and Cavitation Phenomena in Diesel Injection Nozzles and Its Effects on Spray and Mixture Formation SAE Technical Paper 2003-01-1358 2003 10.4271/2003-01-1358
  9. Han , J. , Lu , P. , Xie , X. , Lai , M. et al. Investigation of Diesel Spray Primary Break-up and Development for Different Nozzle Geometries SAE Technical Paper 2002-01-2775 2002 10.4271/2002-01-2775
  10. He , L. and Ruiz , F. Effect of Cavitation on Flow and Turbulence in Plain Orifice for High-Speed Atomization Atomization and Sprays 1995 5 6 569 584
  11. Soteriou , C. , Andrews , R.J. , Torres , N. , Smith , M. , and Kunkulagunta , R. Through the Diesel Nozzle Hole - A Journey of Discovery II Proc. ILASSEurope Zurich, Switzerland September 2001
  12. Asi O. 2006 Failure of a diesel engine injector nozzle by cavitation damage Engin. Failure Analysis 13 112
  13. Benajes , J , Pastor , J.V. , Payri , R. , Plazas , A. H. Analysis of the Influence of Diesel Nozzle Geometry in the Injection Rate Characteristics J. Fluids Eng 2004 126 63 71
  14. Payri , R. , Garcia , J.M. , Salvador , F.J. , Gimeno , J. Using Spray Momentum Flux Measurements to Understand the Influence of Diesel Nozzle Geometry on Spray Characteristics Fuel 2005 84 551 61
  15. Brusiani , F. , Negro , S. , Bianchi , G. , Moulai , M. et al. Comparison of the Homogeneous Relaxation Model and a Rayleigh Plesset Cavitation Model in Predicting the Cavitating Flow Through Various Injector Hole Shapes SAE Technical Paper 2013-01-1613 2013 10.4271/2013-01-1613
  16. Product Information Giessen Werth Messtechnik 2004
  17. Baltes , H. , Brand , O. , Fedder , G.K. , Hierold , C. , Korvink , O. , Tabata , D. Microengineering of Metals and Ceramics: Part II Löhe Detlef , Haußelt Jürgen 2005
  18. Macian , V. , Bermudez , V. , Payri , R. , Gimeno , J. New Technique for Determination of Internal Geometry of a Diesel Nozzle with the Use of Silicon Methodology Innovative Measurement Techniques Series: Part 3 March April 2003
  19. Bianchi , G. , Falfari , S. , Brusiani , F. , Pelloni , P. et al. Numerical Investigation of Critical Issues in Multiple- Injection Strategy Operated by a New C.R. Fast-Actuation Solenoid Injector SAE Technical Paper 2005-01-1236 2005 10.4271/2005-01-1236
  20. Fluent v12 User Manual Fluent Inc.
  21. Versteeg , H.K. , Malalasekera , W. An Introduction to Computational Fluid Dynamics: The Finite Volume Method 2nd Longman 2006
  22. Singhal , A. K. , Li , H. Y. , Athavale , M. M. , and Jiang , Y. Mathematical Basis and Validation of the Full Cavitation Model ASME FEDSM'01 New Orleans, Louisiana 2001
  23. Winklhofer , E. , Kull , E. , Kelz , E. , and Morozov , A. Comprehensive hydraulic and flow field documentation in model throttle experiments under cavitation conditions 17th Annual Conference on Liquid Atomization and Spray Systems Zurich, Switzerland September 2001
  24. Mirosław Chorazewski , M. , Dergal , F. , Sawaya , T. , Mokbel , I. , Grolier J.P. , Jose , J. Thermophysical properties of Normafluid (ISO 4113) over wide pressure and temperature ranges Fuel 105 2013 440 450
  25. Som , S. , Ramirez , A.I. , Longman , D.E. , Aggarwal , S.K. , Kastengren , A.L. , El-Hannouny , E.M. Effect of Nozzle Orifice Geometry on Spray, Combustion, and Emission Characteristics under Diesel Engine Conditions Fuel 90 2011 1267 1276
  26. Sallam , K. A. , and Faeth , G. M. Surface Properties During Primary Breakup of Turbulent Liquid Jets in Still Air AIAA Journal 41 8 August 2003
  27. Brusiani , F. , Bianchi , G. , and Tiberi , A. Primary Breakup Model for Turbulent Liquid Jet Based on Ligament Evolution SAE Technical Paper 2012-01-0460 2012 10.4271/2012-01-0460

Cited By