Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

A Numerical Study of the Effects of FAME Blends on Diesel Combustion and Emissions Characteristics Using a 3-D CFD Code Combined with Detailed Kinetics and Phenomenological Soot Formation Models

Journal Article
2013-01-2689
ISSN: 1946-3952, e-ISSN: 1946-3960
DOI: https://doi.org/10.4271/2013-01-2689
Published October 14, 2013 by SAE International in United States
A Numerical Study of the Effects of FAME Blends on Diesel Combustion and Emissions Characteristics Using a 3-D CFD Code Combined with Detailed Kinetics and Phenomenological Soot Formation Models
Sector:
Citation: Cui, X., Zhou, B., Matsunaga, M., Fujii, Y. et al., "A Numerical Study of the Effects of FAME Blends on Diesel Combustion and Emissions Characteristics Using a 3-D CFD Code Combined with Detailed Kinetics and Phenomenological Soot Formation Models," SAE Int. J. Fuels Lubr. 6(3):839-851, 2013, https://doi.org/10.4271/2013-01-2689.
Language: English

References

  1. United States Environmental Protection Agency 2002 A Comprehensive Analysis of Biodiesel Impacts on Exhaust Emissions Draft Technical Report, EPA420-P-02-001
  2. Sharma Y. C. , Singh B. , and Upadhyay S. N. Advancements in development and characterization of biodiesel: A review Fuel 87 12 2008 09 2322 2373
  3. Satyanarayana M. , and Muraleedharan C. A comparative study of vegetable oil methyl esters (biodiesels) Energy 36 4 2011 4 2129 2137
  4. Curran HJ , Fischer SL , and Dryer FL The reaction kinetics of dimethyl ether, II: low-temperature pyrolysis and oxidation in flow reactors Int J Chem Kinet 2000 32 741 59
  5. Rochaya D. Numerical simulation of spray combustion using bio-mass derived liquid fuels Cranfield University PhD Thesis Bedfordshire 2007
  6. Brakora , J. , Ra , Y. , Reitz , R. , McFarlane , J. et al. Development and Validation of a Reduced Reaction Mechanism for Biodiesel-Fueled Engine Simulations SAE Int. J. Fuels Lubr. 1 1 675 702 2008 10.4271/2008-01-1378
  7. Golovitchev V. , and Yang J. Construction of combustion models for rapeseed methyl ester bio-diesel fuel for internal combustion engine applications Biotechnology Advances 27 2009 641 655
  8. Cheng A. S. , Upatnieks A. , and Mueller C. J. Investigation of the impact of biodiesel fuelling on NOx emissions using an optical direct injection diesel engine Int. J. Engine Res. 2006 8 1 297 318
  9. Yoshimoto Y. , and Kinoshita E. Applied technology of vegetable oils for diesel engines - use of biodiesel fuel Journal of the Combustion Society of Japan 51 156 2009 121 128
  10. Carlucci , P. , Ficarella , A. , and Laforgia , D. Effects of Pilot Injection Parameters on Combustion for Common Rail Diesel Engines SAE Technical Paper 2003-01-0700 2003 10.4271/2003-01-0700
  11. Wang X. , H.Z. , Kuti O. A. , Zhang W. , and Nishida K. Experimental and analytical study on biodiesel and diesel spray characteristics under ultra-high injection pressure International Journal of Heat and Fluid Flow 31 2010 659 666
  12. Nakakita K. , Kondoh T. , and Watanabe S. A study on diesel combustion with high-pressure fuel injection (improvement of combustion and exhaust emissions using small-hole-diameter nozzles) The Japan Society of Mechanical Engineers 60-577 1994 9 254 262
  13. Suzuki M. , Nishida K. , and Hiroyasu H. Mixture formation process in a diesel spray with high injection pressure (behavior of spray injected into a model combustion chamber) The Japan Society of Mechanical Engineers 60-569 1994 1 327 334
  14. Maiboom A. , Tauzia X. , and Hetet J. F. Experimental study of various effects of exhaust gas recirculation (EGR) on combustion and emissions of an automotive direct injection diesel engine Energy 33 2008 22 34
  15. Cui , X. , Kim , T. , Fujii , Y. , Kusaka , J. et al. The Effects of Jatropha-derived Biodiesel on Diesel Engine Combustion and Emission Characteristics SAE Technical Paper 2012-01-1637 2012 10.4271/2012-01-1637
  16. Szybist James P. , Boehman Andre L. , Taylor Joshua D. , and McCormick Robert L. Evaluation of formulation strategies to eliminate the biodiesel NOx effect Fuel Processing Technology 86 2005 1109 1126
  17. Reid R. C. , and Prausnitz J. M. The properties of gases and liquids McGRAW-HILL, Inc. 4th 1987
  18. Nakakita K. , Kondoh T. , Ohsawa K. , Takahashi T. , and Watanabe S. Optimization of pilot injection pattern and its effect on diesel combustion with high-pressure injection JSME international Journal, Series B, Fluids and Thermal Engineering 1994 37 966 973
  19. Ishida M. , Chen Z. L. , Luo G. F. , and Ueki H. Effect of pilot injection on combustion in a turbocharged D.I. diesel engine SAESA2, 95-005154-012
  20. Tanaka T. , Ando A. , and Ishizaka K. Study on pilot injection of DI diesel engine using common-rail injection system JSAE Review 23 3 2002 6 297 302
  21. Ladommatos , N. , Abdelhalim , S. , Zhao , H. , and Hu , Z. The Dilution, Chemical, and Thermal Effects of Exhaust Gas Recirculation on Disesel Engine Emissions - Part 4: Effects of Carbon Dioxide and Water Vapour SAE Technical Paper 971660 1997 10.4271/971660
  22. Ladommatos , N. , Abdelhalim , S. , Zhao , H. , and Hu , Z. Effects of EGR on Heat Release in Diesel Combustion SAE Technical Paper 980184 1998 10.4271/980184
  23. Jacobs , T. , Assanis , D. , and Filipi , Z. The Impact of Exhaust Gas Recirculation on Performance and Emissions of a Heavy-Duty Diesel Engine SAE Technical Paper 2003-01-1068 2003 10.4271/2003-01-1068
  24. Amsden A. A. KIVA-3: A KIVA program with block- structured mesh for complex geometries Report LA- 12503-MS Los Alamos National Laboratory 1993
  25. Kusaka , J. , Horie , N. , Daisho , Y. , Golovichev , V. et al. Numerical Simulation Accounting for the Finite-Rate Elementary Chemical Reactions for Computing Diesel Combustion Process SAE Technical Paper 2005-24-051 2005 10.4271/2005-24-051
  26. Kusaka J. , Montorsi L. , Golovitchev V. , and Denbratt I. Numerical simulation of combustion in a heavy duty diesel engine FISITA 2006, F2006P398
  27. Tao , F. , Golovitchev , V. , and Chomiak , J. Self-Ignition and Early Combustion Process of n-Heptane Sprays Under Diluted Air Conditions: Numerical Studies Based on Detailed Chemistry SAE Technical Paper 2000-01-2931 2000 10.4271/2000-01-2931
  28. Gustavsson , J. and Golovitchev , V. Spray Combustion Simulation Based on Detailed Chemistry Approach for Diesel Fuel Surrogate Model SAE Technical Paper 2003-01-1848 2003 10.4271/2003-01-1848
  29. Yang J. , Johansson M. , and Golovitchev V. Engine Performance and Emissions Formation for RME and Conventional Diesel Oil: A Comparative Study Proceeding of the ASME Internal Combustion Engine Division 2009 Spring Technical Conference, ICES2009-76121
  30. Yang J. , Golovitchev V. , Lurbe P. R. , and Sanchez J. L. Chemical kinetic study of nitrogen oxides formation trends in biodiesel combustion International Journal of Chemical Engineering 2012 898742
  31. Beale J. , and Reitz R. D. Modeling spray atomization with the Kelvin Helmholtz/Rayleigh-Taylor hybrid model Atomization and Sprays 1999 9 623 650
  32. Kaminaga T. , Kusaka J. , and Ishii Y. A three- dimensional numerical study on exhaust gas emissions from a medium-duty diesel engine using a phenomenological soot particle formation model combined with detailed chemistry Int. J. Engine Res. 9 283 296
  33. Hill S. C. , and Smoot L. Douglas Modeling of nitrogen oxides formation and destruction in combustion systems Prog. Energy Combust., Sci. 2000 26 417 458
  34. Amsden A. A. KIVA-3: A block-structured KIVA program for engines with vertical or canted valves LA-13313-MS Los Alamos National Laboratory 1997
  35. Daubert T. , and Danner R. Physical and thermodynamic properties of pure chemicals, data compilation Taylor & Francis Group 1994
  36. http://garfield.chem.elte.hu/Burcat/THERM.DAT
  37. Vlasov P. A. , and Warnatz J. Detailed kinetic modeling of soot formation: Results, problems, and prospects German-Russian Workshop on Reactive flows 2002
  38. Morishima A. , Kusaka J. , and Daisho Y. Numerical and experimental study on particulate matter formation process in diesel combustion - analysis in fuel-rich HCCI combustion JSAE, 20074133 2007
  39. Yang J. Biodiesel spray combustion modeling based on a detailed chemistry approach Department of Applied Mechanics Division of Combustion, Chalmers University of Technology Gothenburg, Sweden 2012 5 18
  40. Crookes R. J. , Sivalingam G. , Nazha M. A. A. , and Rajakaruna H. Prediction and measurement of soot particulate formation in a confined diesel fuel spray-flame at 2.1 MPa Int. J. Thermal Sci. 2003 42 639 646
  41. Tao F. , Forster D. E. , and Reitz R. D. Characterization of soot particle distribution in conventional, non-premixed DI diesel flame using a multi-step phenomenological soot model Proc. Combust. Inst. 2007 31 2991 2998
  42. Ito , T. , Hosaka , T. , Ueda , M. , Senda , J. et al. Detailed Kinetic Modeling and Laser Diagnostics of Soot Formation Process in Diesel Jet Flame SAE Technical Paper 2004-01-1398 2004 10.4271/2004-01-1398

Cited By

Recommended Content

Technical Paper DI Diesel Emission Control by Optimized Fuel Injection
Technical Paper The Effect of Post Injection Coupled with Extremely High Injection Pressure on Combustion Process and Emission Formation in an Off-Road Diesel Engine: A Numerical and Experimental Investigation
Technical Paper Low Soot, Low NOx in a Heavy Duty Diesel Engine Using High Levels of EGR