This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Computational Study of Coanda Adhesion Over Curved Surface

Journal Article
2013-01-2302
ISSN: 1946-3855, e-ISSN: 1946-3901
Published September 17, 2013 by SAE International in United States
Computational Study of Coanda Adhesion Over Curved Surface
Sector:
Citation: Subhash, M. and Dumas, A., "Computational Study of Coanda Adhesion Over Curved Surface," SAE Int. J. Aerosp. 6(1):260-272, 2013, https://doi.org/10.4271/2013-01-2302.
Language: English

Abstract:

This paper presents a set of numerical computations with different turbulence model on an air jet flowing tangentially over the curved surface. It has been realized that jet deflection angle and the corresponding thrust are important parameter to determine with great care. Through the grid independence analysis, it has been found that without resolution of the viscous sub-layer, it is not possible to determine the computationally independent angle of jet deflection and boundary layer thickness. The boundary layer analysis has been performed at different radius of curvature and at jet Reynolds number ranging from approximately about 2400-10,000. The boundary layer thickness has been determined at the verge of separation and found a relation with the radius of curvature and jet Reynolds number. The skin-friction coefficient has been also studied at the verge of separation in relation to the surface radius and jet Reynolds number. In this research work, the inter-relation between flow and geometric parameters has been recognized for the further design of the Coanda nozzle flow. The result presented in this paper can serve as guidelines for the experimental investigation of such type of flow in order to have better insight into the flow.