This content is not included in your SAE MOBILUS subscription, or you are not logged in.
Knock Tendency Prediction in a High Performance Engine Using LES and Tabulated Chemistry
ISSN: 1946-3952, e-ISSN: 1946-3960
Published April 08, 2013 by SAE International in United States
Citation: Fontanesi, S., Paltrinieri, S., D'Adamo, A., Cantore, G. et al., "Knock Tendency Prediction in a High Performance Engine Using LES and Tabulated Chemistry," SAE Int. J. Fuels Lubr. 6(1):98-118, 2013, https://doi.org/10.4271/2013-01-1082.
The paper reports the application of a look-up table approach within a LES combustion modelling framework for the prediction of knock limit in a highly downsized turbocharged DISI engine.
During experimental investigations at the engine test bed, high cycle-to-cycle variability was detected even for relatively stable peak power / full load operations of the engine, where knock onset severely limited the overall engine performance.
In order to overcome the excessive computational cost of a direct chemical solution within a LES framework, the use of look-up tables for auto-ignition modelling perfectly fits with the strict mesh requirements of a LES simulation, with an acceptable approximation of the actual chemical kinetics.
The model here presented is a totally stand-alone tool for autoignition analysis integrated with look-up table reading from detailed chemical kinetic schemes for gasoline. The look-up table access is provided by a multi-linear interpolating routine internally developed at the “Gruppo Motori (GruMo)” of the University of Modena and Reggio Emilia. As the experimental tests were conducted operating the engine at knock-limited spark advance, the tool is at first validated for three different LES cycles in terms of knock tolerance, i.e. the safety margin to knock occurrence.
As a second stage, the validation of the methodology is performed for discrete spark advance increases in order to assess the sensitivity of the modelling strategy to variations in engine operations. A detailed analysis of the unburnt gas physical state is performed which confirms the knock-limited condition suggested by the experimental tests.