This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Fatigue Evaluation of Notched Plate Specimens by the Battelle Structural Stress Method

Journal Article
2013-01-1011
ISSN: 1946-3979, e-ISSN: 1946-3987
Published April 08, 2013 by SAE International in United States
Fatigue Evaluation of Notched Plate Specimens by the Battelle Structural Stress Method
Sector:
Citation: Hong, J. and Forte, T., "Fatigue Evaluation of Notched Plate Specimens by the Battelle Structural Stress Method," SAE Int. J. Mater. Manf. 6(2):262-270, 2013, https://doi.org/10.4271/2013-01-1011.
Language: English

References

  1. Neuber H. Theory Of Stress Concentration for Shear-Strained Prismatical Bodies with Arbitrary Non-Linear Stress-Strain Curve Trans. ASME Journal of Applied Mechanics 28 544 550 1961
  2. Peterson R. E. Stress Concentration Design Factors John Wiley New York, USA 1953
  3. Glinka G. Calculation of Inelastic Notch-Tip Strain-Stress Histories under Cyclic Loading Engineering Fracture Mechanics 22 5 839 854 1985
  4. Glinka G , and Newport A. Universal Features of Elastic Notch-Tip Stress Fields International Journal of Fatigue 9 3 143 150 1987
  5. Dong , P. , Hong , J.K. , and Cao , Z. A Mesh-Insensitive Structural Stress Procedure for Fatigue Evaluation of Welded Structures IIW Doc. XIII-1902-01/XV-1089-01 2001
  6. Dong , P. , Hong , J. K. , Osage , D.A. , Dewees , D.J. , and Prager , M. The Master S-N Curve Method An Implementation for Fatigue Evaluation of Welded Components in the ASME B&PV Code, Section VIII, Division 2 and API 579-1/ASME FF-1 Welding Research Council Bulletin 523 Welding Research Council 2010
  7. Dong , P. , Hong , J.K. , and Cao , Z. Structural Stress Based Master S-N Curve for Welded Joints IIW Doc. XIII-1930-02/XV-1119-02 2002
  8. Dong , P. and Hong , J. K. The Master S-N Curve Approach to Fatigue Evaluation of Offshore and Marine Structures OMAE2004-51324 2004
  9. Dong , P. and Hong , J.K. The Master S-N Curve Approach to Fatigue of Piping and Vessel Welds Welding in the World 48 1/2 28 36 2004
  10. Dong , P. , Hong , J. K. , and De Jesus , A. M. P. Analysis of Recent Fatigue Data Using the Structural Stress Procedure in ASME Div 2 Rewrite Trans. ASME Journal of Pressure Vessel Technology 139 3 355 362 2007
  11. 2007 ASME Boiler and Pressure Vessel Code, Section VIII, Div.2 ASME 2007
  12. API Standard 579-1/ASME FFS-1 Fitness for Service API 2007
  13. Dong , P. and Hong , J. CAE Weld Durability Prediction: A Robust Single Damage Parameter Approach SAE Technical Paper 2002-01-0151 2002 10.4271/2002-01-0151
  14. Kyuba , H. , Dong , P. , Hong , J.K. , and Agrawal , H. SAE Weld Challenge Problem SAE Technical Paper 2204-01-1234 2004
  15. Hong , J. The Development of a Simplified Spot Weld Model for Battelle Structural Stress Calculation SAE Int. J. Mater. Manuf. 4 1 602 612 2011 10.4271/2011-01-0479
  16. Hong , J. and Forte , T. Development of Fatigue Evaluation Procedure for Weld-Bonded Joints Using the Battelle Structural Stress Method SAE Technical Paper 2012-01-0477 2012 10.4271/2012-01-0477
  17. Hong , J.K. and Dong , P. Hot Spot Stress and Structural Stress Analysis of FPSO Fatigue Details OMAE-FPSO-023 2004
  18. Hong , J.K. Evaluation of Weld Root Failure using Battelle Structural Stress Method OMAE2010-20387 2010
  19. Grover , H. J. , Bishop , S.M. , and Jackson , L. R. Fatigue Strength of Aircraft Materials: Axial-Load Fatigue Tests on Notched Sheet Specimens of 24S-T3 and 75S-T6 Aluminum Alloys and of SAE 4130 Steel with Stress Concentration Factors of 2.0 and 4.0 National Advisory Committee for Aeronautics, Technical Note 2389 1951
  20. Grover , H. J. , Bishop , S.M. , and Jackson , L. R. Fatigue Strength of Aircraft Materials: Axial-Load Fatigue Tests on Notched Sheet Specimens of 24S-T3 and 75S-T6 Aluminum Alloys and of SAE 4130 Steel with Stress Concentration Factor of 5.0 National Advisory Committee For Aeronautics Technical Note 2390 1951
  21. Grover , H. J. , Hyler , W.S. , and Jackson , L. R. Fatigue Strength of Aircraft Materials: Axial-Load Fatigue Tests on Notched Sheet Specimens of 24S-T3 and 75S-T6 Aluminum Alloys and of SAE 4130 Steel with Stress Concentration Factor of 1.5 National Advisory Committee for Aeronautics Technical Note 2639 1952
  22. Dong , P. , Hong , J.K. , and Cao , Z. Stresses and Stress Intensities at Notches: ‘Anomalous Crack Growth’ Revisited International Journal of Fatigue 25 811 825 2003
  23. Kim , J.-S. , Kim , C. , Jin , T.-E. , and Dong , P. Mean Load Effect on Fatigue on Welded Joints Using Structural Stress and Fracture Mechanics Approach Nuclear Engineering and Technology 38 277 284 2006
  24. Maymon , G. A ‘Unified’ and a (ΔK+ΔK max ) 1/2 Crack Growth Models for Aluminum 2024-T351 International Journal of Fatigue 27 629 638 2005
  25. Lazzarin , P. Tovo , R. , and Meneghetti , G. Fatigue Crack Initiation and Propagation Phases near Notches in Metals with Low Notch Sensitivity International Journal of Fatigue 19 647 657 1997
  26. Draper , J. Modern Metal Fatigue Analysis EMAS Publishing 2008

Cited By