This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Thermomechanical Stress Analysis of Vehicles Gray Cast Brake
Technical Paper
2013-01-0877
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The main purpose of this study is to analyze the thermomechanical behavior of the dry contact between the brake disc and pads during the braking phase. The simulation strategy is based on computer code ANSYS11. The modeling of transient temperature in the disc is actually used to identify the factor of geometric design of the disc to install the ventilation system in vehicles. The thermal-structural analysis is then used with coupling to determine the deformation and the Von Mises stress established in the disk, the contact pressure distribution in pads. The results are satisfactory when compared to those of the specialized literature.
Citation
Belhocine, A. and Mostefa, B., "Thermomechanical Stress Analysis of Vehicles Gray Cast Brake," SAE Technical Paper 2013-01-0877, 2013, https://doi.org/10.4271/2013-01-0877.Also In
References
- Valvano , T. and Lee , K. An Analytical Method to Predict Thermal Distortion of a Brake Rotor SAE Technical Paper 2000-01-0445 2000 10.4271/2000-01-0445
- Anderson A. E. and Knapp R. A. Hot Spotting in Automotive Friction Systems Wear 135 1990 319 337
- Lee , K. and Dinwiddie , R. Conditions of Frictional Contact in Disk Brakes and their Effects on Brake Judder SAE Technical Paper 980598 1998 10.4271/980598
- Bakara,b Abd. Rahim Abu , Ouyangc Huajiang , Khaia,d Lee Chiing , and Abdullaha Mohd Shahrulizam 2010 Thermal Analysis of a Disc Brake Model Considering a Real Brake Pad Surface and Wear Int. J. Vehicle Structures & Systems 2 1 20 27
- Gao C.H. and Lin X.Z. 2002 Transient temperature field analysis of a brake in a non- axisymmetric threedimensional model J. Materials Processing Technology 129 513 517
- Lee S. and Yeo T. 2000 Temperature and coning analysis of brake rotor using an axisymmetric finite element technique Proc. 4th Korea-Russia Int. Symp. On Science & Technology 3 17 22
- Ouyang H. , AbuBakar A.R. , and Li L. 2009 A combined analysis of heat conduction, contact pressure and transient vibration of a disc brake Int. J. Vehicle Design 51 1/2 190 206
- Hassan M.Z. , Brooks P.C. , and Barton D.C. 2009 A predictive tool to evaluate disk brake squeal using a fully coupled thermo-mechanical finite element model Int. J. Vehicle Design 51 1/2 124 142
- Sivarao , M. Amarnath , Rizal M.S. , Kamely A. An Investigation Toward Development Of Economical Brake Lining Wear Alert System International Journal of Engineering & Technology IJET 9 9 251 256
- Kuciej Michal , Grzes Piotr the comparable analysis of temperature distributions assessment in disc brake obtained using analytical method and fe model journal of kones powertrain and transport 18 2 2011
- Cho Chongdu , Ahn Sooick Thermo-elastic analysis for chattering phenomenon of automotive disk brake KSME International Journal May 2001 15 5 569 579
- Zhang Lele , Yang Qiang , Weichert D. , Tan Nanlin Simulation and Analysis of Thermal Fatigue Based on Imperfection Model of Brake Discs Beijing Jiaotong University PAMM · Proc. Appl. Math. Mech. 9 533 534 2009
- Reimpel J. Braking technology Vogel Verlag Würzburg 1998
- Gotowicki , Pier Francesco ; Nigrelli , Vinzenco ; Mariotti , Gabriele Virzi Numerical and experimental analysis of a pegs- wing ventilated disk brake rotor, with pads and cylinders 10th EAEC Eur. Automot. Cong - Paper EAEC05YUAS04- P 5 June 2005
- Dittrich H. and Lang R. Finite-Element Analysis of the Thermal Loads Acting on a Passenger Car Brake Disk Automobiltechnische Zeitschrift 86 6 265 269 1984
- Fukano , A. and Matsui , H. Development of Disc-Brake Design Method Using Computer Simulation of Heat Phenomena SAE Technical Paper 860634 1986 10.4271/860634
- ANSYS v.11 Ansys user manual ANSYS, Inc. Houston, USA 1996
- Galindo-Lopez H. Carlos Evaluating new ways of conducting convective heat dissipation experiments with ventilated brake discs Cranfield University Bedfordshire, MK43 OAL 2001
- Koetniyom S , Brooks P C and Barton D C The development of a material model for cast iron that can be used for brake system analysis Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 2002 216 349
- Nouby M. and Srinivasan K. Parametric Studies of Disc Brake Squeal using Finite Element Approach” Anna University Chennai- 600025 India Jurnal Mekanikal December 2009 29 52 66
- Bakar A.R. Abu and Ouyang H. 2008 Wear prediction of friction material and brake squeal using the finite element method Wear 264 11-12 1069 1076
- Tirovic , M. , and Day , A. J. 1991 Disc brake interface pressure distribution IMechE Journal of Automobile Engineering 205 137 146
- Ouyang , H. , Cao , Q. , Mottershead , J. E. , and Treyde , T. 2003 Vibration and squeal of a disc brake: modelling and experimental results IMechE Journal of Automotive Engineering 217 867 875
- Lee , Y. S. , Brooks , P. C. , Barton , D. C. , and Crolla , D. A. 2003 A predictive tool to evaluate disc brake squeal propensity Part 1: The model philosophy and the contact problem International Journal of Vehicle Design 31 289 308