This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Front Rail Crashworthiness Design for Front Oblique Impact Using a Magic Cube Approach

Journal Article
2013-01-0651
ISSN: 2327-5626, e-ISSN: 2327-5634
Published April 08, 2013 by SAE International in United States
Front Rail Crashworthiness Design for Front Oblique Impact Using a Magic Cube Approach
Sector:
Citation: Hu, S., Ma, Z., Qi, C., and Ding, Y., "Front Rail Crashworthiness Design for Front Oblique Impact Using a Magic Cube Approach," SAE Int. J. Trans. Safety 1(1):100-113, 2013, https://doi.org/10.4271/2013-01-0651.
Language: English

References

  1. Mahmood , H. and Paluszny , A. Design of Thin Walled Columns for Crash Energy Management - Their Strength and Mode of Collapse SAE Technical Paper 811302 1981 10.4271/811302
  2. Abramowicz , W. and Jones , H. Dynamic axial crushing of square tubes Int. J. Impact Eng. 2 2 179 208 1984 10.1016/0734-743X(84)90005-8
  3. Mamalis , A.G. , Manolakos , D.E. , Baldoukas , A.K. , and Viegelahn , G.L. Energy dissipation and associated failure modes when axially loading polygonal thin-walled cylinders Thin-Walled Struct. 12 1 17 34 1991 10.1016/0263-8231(91)90024-D
  4. Mamalis , A.G. , Manolakos , D.E. , Ioannidis , M.B. , Kostazos , P.K. et al. Finite element simulation of the axial collapse of metallic thin-walled tubes with octagonal cross-section Thin-Walled Struct. 41 10 891 900 2003 10.1016/S0263-8231(03)00046-6
  5. Li , W. , Tyan , T. , Chen , G. , Chen , X. et al. Numerical Investigation of Effects of Frame Trigger Hole Location on Crash Behavior SAE Technical Paper 2005-01-0702 2005 10.4271/2005-01-0702
  6. Kitagawa , Y. , Hagiwara , l. , and Tsuda , M. Development of a Collapse Mode Control Method for Side Members in Vehicle Collisions SAE Technical Paper 910809 1991 10.4271/910809
  7. Yamazaki , K. and Han , J. Maximization of the crushing energy absorption of tubes Struct. Optim. 16 1 37 46 1998 10.1007/BF01213998
  8. Han , D.C. and Park , S.H. Collapse behavior of square thin-walled columns subjected to oblique loads Thin-Walled Struct. 35 3 167 184 1999 10.1016/S0263-8231(99)00022-1
  9. Nagel , G.M. and Thambiratnam , D.P. Dynamic simulation and energy absorption of tapered thin-walled tubes under oblique impact loading Int. J. Impact Eng. 32 10 1595 1620 2006 10.1016/j.ijimpeng.2005.01.002
  10. Ahmada , Z. , Thambiratnamb , D.P. and Tan , A.C.C. Dynamic energy absorption characteristics of foam-filled conical tubes under oblique impact loading Int. J. Impact Eng. 37 5 475 488 2010 10.1016/j.ijimpeng.2009.11.010
  11. Qi , C. , Ma , Z. , Kikuchi , N. , Pierre , C. et al. Fundamental Studies on Crashworthiness Design with Uncertainties in the System SAE Technical Paper 2005-01-0613 2005 10.4271/2005-01-0613
  12. Qi , C. , Yang , S. and Dong , F. Crushing analysis and multi objective crashworthiness optimization of tapered square tubes under oblique impact loading Thin-WalledStruct. 59 103 119 2012 10.1016/j.tws.2012.05.008
  13. Qi , C. , Ma , Z. , Kikuchi , N. , Pierre , C. et al. A Magic Cube Approach for Crashworthiness Design SAE Technical Paper 2006-01-0671 2006 10.4271/2006-01-0671
  14. Ma , Z. , Wang , H. , Kikuchi , N. , Pierre , C. et al. Substructure Design Using a Multi-Domain Multi-Step Topology Optimization Approach SAE Technical Paper 2003-01-1303 2003 10.4271/2003-01-1303
  15. Ma , Z.D. , Kikuchi , N. , Pierre , C. , and Raju , B. A Multi-Domain Topology Optimization Approach for Structural and Material Designs J. Appl. Mech. 73 4 565 573 2006 10.1115/1.2164511
  16. Wang , H. , Ma , Z. , Kikuchi , N. , Pierre , C. et al. Multi-Domain Multi-Step Topology Optimization for Vehicle Structure Crashworthiness Design SAE Technical Paper 2004-01-1173 2004 10.4271/2004-01-1173
  17. Wang , X. , Li H. G. , and Zhao , H. Modern Automobile Safety China Communication Press 1998
  18. Cleveland , W.S. Robust Locally Weighted Regression and Smoothing Scatter plots J. Am. Statist.Assoc. 74 368 829 836 1979 10.1080/01621459.1979.10481038

Cited By