Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Virtual Combustion Phasing Target Correction in the Knock Region for Model-Based Control of Multi-Fuel SI Engines

Journal Article
2013-01-0307
ISSN: 1946-3936, e-ISSN: 1946-3944
DOI: https://doi.org/10.4271/2013-01-0307
Published April 08, 2013 by SAE International in United States
Virtual Combustion Phasing Target Correction in the Knock Region for Model-Based Control of Multi-Fuel SI Engines
Sector:
Citation: Xiao, B., Wang, S., and Prucka, R., "Virtual Combustion Phasing Target Correction in the Knock Region for Model-Based Control of Multi-Fuel SI Engines," SAE Int. J. Engines 6(1):228-236, 2013, https://doi.org/10.4271/2013-01-0307.
Language: English

References

  1. Jiang , S. , Nutter , D. , and Gullitti , A. Implementation of Model-Based Calibration for a Gasoline Engine SAE Technical Paper 2012-01-0722 2012 10.4271/2012-01-0722
  2. Guerrier , M. and Cawsey , P. The Development of Model Based Methodologies for Gasoline IC Engine Calibration SAE Technical Paper 2004-01-1466 2004 10.4271/2004-01-1466
  3. Schlosser , A. , Kinoo , B. , Salber , W. , Werner , S. et al. Accelerated Powertrain Development Through Model Based Calibration SAE Technical Paper 2006-01-0858 2006 10.4271/2006-01-0858
  4. Chen , R. , Milovanovic , N. A computational study into the effect of exhaust gas recycling on homogeneous charge compression ignition combustion in internal combustion engines fuelled with methane International Journal of Thermal Sciences 41 2002 805 813
  5. Xiao , B. , Wang , S. , Prucka , R. A Semi-Physical Artificial Neural Network for Feed Forward Ignition Timing Control of Multi-Fuel SI Engines SAE Technical Paper 2013-01-0324 2013 10.4271/2013-01-0324
  6. Aceves , S. , Flowers , D. , Westbrook , C. , Smith , J. et al. A Multi-Zone Model for Prediction of HCCI Combustion and Emissions SAE Technical Paper 2000-01-0327 2000 10.4271/2000-01-0327
  7. Fiveland , S. and Assanis , D. Development and Validation of a Quasi-Dimensional Model for HCCI Engine Performance and Emissions Studies Under Turbocharged Conditions SAE Technical Paper 2002-01-1757 2002 10.4271/2002-01-1757
  8. Yates , A. and Viljoen , C. An Improved Empirical Model for Describing Auto-ignition SAE 2008-01-1629 2008 10.4271/2008-01-1629
  9. Tabaczynski , R. , Ferguson , C. , and Radhakrishnan , K. A Turbulent Entrainment Model for Spark-Ignition Engine Combustion SAE Technical Paper 770647 1977 10.4271/770647
  10. Tabaczynski , R. , Trinker , F. , Shannon , B. Further Refinement and Validation of a Turbulent Flame Propagation Model for Spark Ignition Engines Combustion and Flame 39 111 121 1980
  11. Prucka , R. An Experimental Characterization of a High Degree of Freedom Spark-Ignition Engine to Achieve Optimized Ignition Timing Control PhD Dissertation University of Michigan 2008
  12. Priesching , P. , Wanker , R. , Tatschl , R. Detailed and Reduced Chemistry CFD Modeling of Premixed Charge Compression Ignition Engine Combustion International Multidimensional Engine Modeling User's Group Meeting 2003
  13. Kong , S. , Marriott , C. , Rutland , C. , and Reitz , R. Experiments and CFD Modeling of Direct Injection Gasoline HCCI Engine Combustion SAE 2002-01-1925 2002 10.4271/2002-01-1925
  14. Kiencke U. , Nielsen L. Automotive Control Systems Springer Verlag Berlin 2000
  15. Zhu , G. , Haskara , I. , and Winkelman , J. Stochastic Limit Control and Its Application to Knock Limit Control Using Ionization Feedback SAE Technical Paper 2005-01-0018 2005 10.4271/2005-01-0018
  16. Kawamura , Y. , Shinshi , M. , Sato , H. , Takahashi , N. et al. MBT Control through Individual Cylinder Pressure Detection SAE Technical Paper 881779 1988 10.4271/881779
  17. Westbrook , C.K. , Warnatz , J. , and Pitz , W.J. A detailed chemical kinetic reaction mechanism for the oxidation of iso-octane and n-heptane over an extended temperature range and its application to analysis of engine knock Twenty-second Symposium (Int.) on Combustion The Combustion Institute 893 901 1988
  18. Livengood , J. C. , Wu , P. C. Correlation Of Autoignition Phenomena In Internal Combustion Engines And Rapid Compression Machines 5th Symp. (Int.) on Combustion 347 Reinhold Publishing Corp. 1955
  19. Glassman , I. Combustion Academic Press 1977
  20. Kasseris , E. Knock Limits in Spark Ignited Direct Injected Engines Using Gasoline/Ethanol Blends PhD dissertation Massachusetts Institute of Technology 2011
  21. Patterson , G. and Davis , R. Geometric and Topological Considerations to Maximize Remotely Mounted Cylinder Pressure Transducer Data Quality SAE Int. J. Engines 2 1 414 420 2009 10.4271/2009-01-0644
  22. Xiao , B. , Prucka , R. Non-Linear Observer of Laminar Flame Speed for Multi-Fuel Adaptive Spark-Ignited Engines International Journal of Powertrains No. 36399
  23. Assanis D. N. , Filipi Z. S. , Fiveland S. B. , Syrimis M. A predictive ignition delay correlation under steady-state and transient operation of a direct injection diesel engine J. Engng Gas Turbines Power 125 2003 450 457
  24. Douaud , A. and Eyzat , P. Four-Octane-Number Method for Predicting the Anti-Knock Behavior of Fuels and Engines SAE Technical Paper 780080 1978 10.4271/780080
  25. Westbrook , C. K. , Curran , H. J. , Pitz , W. J. , Griffiths Mohamed , J. , and Wo , S. K. The Effects of Pressure, Temperature and Concentration on the Reactivity of Alkanes: Experiments and Modeling in a Rapid Compression Machine 27th International Symposium on Combustion University of Colorado Boulder September 2 7 1998
  26. Kee , R. J. ; Rupley , F. M. ; Miller , J. A. CHEMKIN-II: A Fortran Chemical Kinetics Package for the Analysis of Gas Phase Chemical Kinetics Sandia Report no. SAND 89-8009B; Sandia National Laboratories 1989
  27. Viljoen , C. , Yates , A. , Swarts , A. , Balfour , G. et al. An Investigation of the Ignition Delay Character of Different Fuel Components and an Assessment of Various Autoignition Modelling Approaches SAE Technical Paper 2005-01-2084 2005 10.4271/2005-01-2084
  28. Yates , A. , Swarts , A. , and Viljoen , C. Correlating Auto-Ignition Delays And Knock-Limited Spark-Advance Data For Different Types Of Fuel SAE Technical Paper 2005-01-2083 2005 10.4271/2005-01-2083
  29. Blizard , N. and Keck , J. Experimental and Theoretical Investigation of Turbulent Burning Model for Internal Combustion Engines SAE Technical Paper 740191 1974 10.4271/740191
  30. Hillion , M. , Chauvin , J. , Petit , N. Open-Loop Combustion Timing Control of a Spark-Ignited Engine Proceedings of the 47th IEEE Conference on Decision and Control 5635 5642 2008
  31. Prucka , R. , Lee , T. , Filipi , Z. , and Assanis , D. Turbulence Intensity Calculation from Cylinder Pressure Data in a High Degree of Freedom Spark-Ignition Engine SAE Technical Paper 2010-01-0175 2010 10.4271/2010-01-0175
  32. Woschni , G. A Universally Applicable Equation for the Instantaneous Heat Transfer Coefficient in the Internal Combustion Engine SAE Technical Paper 670931 1967 10.4271/670931
  33. Bonatesta , F. , Waters , B. , Shayler , P. 2010 Burn Angles and Form Factors for Wiebe Function Fits to Mass Fraction Burned Curves of a Spark Ignition Engine with Variable Valve Timing IMechE, Int. Journal of Engine Research 11
  34. Hinze P.C. 1997 Cycle-to-cycle combustion variations in a spark-ignition engine operating at idle Ph.D thesis M.I.T. Massachusetts, United States
  35. Pischinger , S. 1989 Effects of Spark Plug Design Parameters on Ignition and Flame Development in an SI-Engine Ph. D. thesis M.I.T. Massachusetts, United States
  36. Syed , I. , Yeliana , Y. , Mukherjee , A. , Naber , J. et al. Numerical Investigation of Laminar Flame Speed of Gasoline - Ethanol/Air Mixtures with Varying Pressure, Temperature and Dilution SAE Int. J. Engines 3 1 517 528 2010 10.4271/2010-01-0620
  37. Heywood J.B. 1998 Internal Combustion Engines Fundamentals McGraw-Hill. Inc New York
  38. Brunt , M. , Pond , C. , and Biundo , J. Gasoline Engine Knock Analysis using Cylinder Pressure Data SAE Technical Paper 980896 1998 10.4271/980896

Cited By

Recommended Content

Technical Paper Modelling and Simulation of the Combustion of Ethanol blended Fuels in a SI Engine using a 0D Coherent Flame Model
Technical Paper On the Use of System Simulation to Explore the Potential of Innovative Combustion Systems: Methodology and Application to Highly Downsized SI Engines Running with Ethanol-Gasoline Blends
Technical Paper A Study on Combustion Characteristics of a High Compression Ratio SI Engine with High Pressure Gasoline Injection