This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Development and Economic Analysis of a Two Stroke Compounded Engine Concept - the BETE-Max
Technical Paper
2013-01-0286
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Forthcoming transportation carbon dioxide and environment emission regulations favor solutions with the lowest cost of ownership in the open market. Light duty vehicles and especially those used in urban areas benefit the most from increasing electrification, but medium and heavy duty vehicles - including truck, marine, rail and aircraft - have high continuous power requirements that benefit little from electrification until energy storage costs drop significantly. This paper explores energy storage costs whose alternatives will be weighed against increasing payload fraction costs. A conceptual solution is presented that provides low cost of ownership: an engine that operates as a spark-ignited two stroke engine with compounding and light electrification. This engine (named BETE-Max) has a high thermal efficiency across its operating range and is able to meet tailpipe emissions standards with low aftertreatment costs using known technology.
Recommended Content
Authors
Citation
Bucknell, J., "Development and Economic Analysis of a Two Stroke Compounded Engine Concept - the BETE-Max," SAE Technical Paper 2013-01-0286, 2013, https://doi.org/10.4271/2013-01-0286.Also In
References
- Updated Capital Cost Estimates for Electricity Generation Plants U.S. Energy Information Administration, U.S. Department of Energy November 2010
- Aluminum Association Fuel Efficiency Impact of Vehicle Weight Reduction in Class 8 Trucks May 2010 http://www.drivealurninum.org/research-resources/documents
- Warren , C. Lower Cost Carbon Fiber in High Volumes for 21st-century Industries - The Obstacles to Getting There Field Technical Manager Transportation Materials Research Oak Ridge National Laboratory P.O. Box 2009, M/S 8050 Oak Ridge, Tennessee 37831-8050
- http://www.michelintruck.com/michelintruck/tires-retreads/xone/xOne-fuel-savings.jsp
- Light Duty Technology Cost Analysis, Power-Split and P2 HEV Case Studies Prepared for EPA by FEV, Inc., EPA Contract No. EP-C-07-069 U.S. Environmental Protection Agency
- Dickson , J. and Wellington , R. D. Loop Scavenging Used in New 3000-Rpm Diesel SAE Journal 48 55 June 1953
- Tamamidis , P. and Assanis , D. Optimization of Inlet Port Design in a Uniflow-Scavenged Engine Using a 3-D Turbulent Flow Code SAE Technical Paper 931181 1993 10.4271/931181
- Thornhill , D. and Fleck , R. Design of a Blower-Scavenged, Piston-Ported, V6, Two-Stroke Automotive Engine SAE Technical Paper 930980 1993 10.4271/930980
- Duret , P. , Dabadie , J. , Lavy , J. , Allen , J. et al. The Air Assisted Direct Injection ELEVATE Automotive Engine Combustion System SAE Technical Paper 2000-01-1899 2000 10.4271/2000-01-1899
- Blundell , D. , Turner , J. , Duret , P. , Lavy , J. et al. Design and Evaluation of the ELEVATE Two-stroke Automotive Engine SAE Technical Paper 2003-01-0403 2003 10.4271/2003-01-0403
- Blundell , D. and Sandford , M. Two Stroke Engines - The Lotus Approach SAE Technical Paper 920779 1992 10.4271/920779
- Blundell , D. , Turner , J. , Pearson , R. , Patel , R. et al. The Omnivore Wide-range Auto-Ignition Engine: Results to Date using 98RON Unleaded Gasoline and E85 Fuels SAE Technical Paper 2010-01-0846 2010 10.4271/2010-01-0846
- Turner , J. , Blundell , D. , Pearson , R. , Patel , R. et al. Project Omnivore: A Variable Compression Ratio ATAC 2-Stroke Engine for Ultra-Wide-Range HCCI Operation on a Variety of Fuels SAE Int. J. Engines 3 1 938 955 2010 10.4271/2010-01-1249
- Franke , M. , Huang , H. , Liu , J. , Geistert , A. et al. Opposed Piston Opposed Cylinder (opoc™) 450 hp Engine: Performance Development by CAE Simulations and Testing SAE Technical Paper 2006-01-0277 2006 10.4271/2006-01-0277
- Hofbauer , P. Opposed Piston Opposed Cylinder (opoc) Engine for Military Ground Vehicles SAE Technical Paper 2005-01-1548 2005 10.4271/2005-01-1548
- Walker , F. , Ross , M. , and Harris , R. A New Look at Two-Stroke Engines for Passenger Cars in Light of PNGV Goals for the Coming Decade SAE Technical Paper 1999-01-1251 1999 10.4271/1999-01-1251
- Knoll , R. AVL Two-Stroke Diesel Engine SAE Technical Paper 981038 1998 10.4271/981038
- Kim , C. , Perry , K. , Li , W. , Narayanaswamy , K. , Viola , M. Catalyst Design for Urea-less Passive Ammonia SCR Lean-Burn SIDI Aftertreatment System 2010 Directions in Engine-Efficiency and Emissions Research (DEER) Conference Sept. 27 30 Detroit, MI
- Berger , A. and Chenoweth , O. The Turbo Supercharger SAE Technical Paper 310042 1931 10.4271/310042
- Nahum , Andrew The Rolls-Royce Crecy Rolls-Royce Heritage Trust 1994 1872922058
- Pierce , E. and Welsh , H. Engine Compounding For Power And Efficiency SAE Technical Paper 480198 1948 10.4271/480198
- Gerdan , D. and Wetzler , J. Allison V-1710 Compounded Engine SAE Technical Paper 480199 1948 10.4271/480199
- Wiegand , F. and Rowe , M. Compounding The Piston Engine SAE Technical Paper 490088 1949 10.4271/490088
- Schweitzer , P. and Salisbury , J. Compound Powerplants SAE Technical Paper 490226 1949 10.4271/490226
- Wiegand , F. and Eichberg , W. Development of the Turbo Compound Engine SAE Technical Paper 540239 1954 10.4271/540239
- Sammons , H. and Chatterton , E. Napier Nomad Aircraft Diesel Engine SAE Technical Paper 550239 1955 10.4271/550239
- Witzky , J. , Meriwether , R. , and Lux , F. Piston-Turbine-Compound Engine - A Design and Performance Analysis SAE Technical Paper 650632 1965 10.4271/650632
- Vincent , E. The Modern Compound Engine SAE Technical Paper 660131 1966 10.4271/660131
- Dooley , J. and Whittlesey , J. A Highly Compounded Two-Cycle Radial Light-Plane Engine SAE Technical Paper 660173 1966 10.4271/660173
- Wallace , F. The Differential Compound Engine SAE Technical Paper 670110 1967 10.4271/670110
- Wurm , J. , Kinast , J. , and Bulicz , T. Assessment of Positive Displacement Supercharging and Compounding of Adiabatic Diesel SAE Technical Paper 840430 1984 10.4271/840430
- Wilsted , H. Preliminary Survey of Possible Use of the Compound Adiabatic Diesel Engine for Helicopters SAE Technical Paper 820432 1982 10.4271/820432
- Castor , J. , Martin , J. , Bradley , C. Compound Cycle Engine for Helicopter Application NASA CR-180824 September 30 1987
- Chen , S. and Lin , R. A Review of Engine Advanced Cycle and Rankine Bottoming Cycle and Their Loss Evaluations SAE Technical Paper 830124 1983 10.4271/830124
- Bradley , C. Harnessing the Neglected Potential of Rankine Compounding SAE Technical Paper 860536 1986 10.4271/860536
- Endo , T. , Kawajiri , S. , Kojima , Y. , Takahashi , K. et al. Study on Maximizing Exergy in Automotive Engines SAE Technical Paper 2007-01-0257 2007 10.4271/2007-01-0257
- Ringler , J. , Seifert , M. , Guyotot , V. , and Hübner , W. Rankine Cycle for Waste Heat Recovery of IC Engines SAE Int. J. Engines 2 1 67 76 2009 10.4271/2009-01-0174
- Edwards , K. , Wagner , R. , and Briggs , T. Investigating Potential Light-duty Efficiency Improvements through Simulation of Turbo-compounding and Waste-heat Recovery Systems SAE Technical Paper 2010-01-2209 2010 10.4271/2010-01-2209
- Internal Combustion Engine With Integrated Waste Heat Recovery System US Patent Application US 2010/0083919
- Pfahl , U. , Schatz , A. , and Konieczny , R. Advanced Exhaust Gas Thermal Management for Lowest Tailpipe Emissions - Combining Low Emission Engine and Electrically Heated Catalyst SAE Technical Paper 2012-01-1090 2012 10.4271/2012-01-1090
- Hoepke , B. , Jannsen , S. , Kasseris , E. , and Cheng , W. EGR Effects on Boosted SI Engine Operation and Knock Integral Correlation SAE Technical Paper 2012-01-0707 2012 10.4271/2012-01-0707
- Parks , J. , Prikhodko , V. , Partridge , W. , Choi , J. et al. Lean Gasoline Engine Reductant Chemistry During Lean NOx Trap Regeneration SAE Int. J. Fuels Lubr. 3 2 956 962 2010 10.4271/2010-01-2267
- Alger , T. , Mangold , B. , Roberts , C. , and Gingrich , J. The Interaction of Fuel Anti-Knock Index and Cooled EGR on Engine Performance and Efficiency SAE Technical Paper 2012-01-1149 2012 10.4271/2012-01-1149
- Alger , T. , Chauvet , T. , and Dimitrova , Z. Synergies between High EGR Operation and GDI Systems SAE Int. J. Engines 1 1 101 114 2009 10.4271/2008-01-0134
- Kasseris , E. and Heywood , J. Charge Cooling Effects on Knock Limits in SI DI Engines Using Gasoline/Ethanol Blends: Part 1-Quantifying Charge Cooling SAE Technical Paper 2012-01-1275 2012 10.4271/2012-01-1275
- Kasseris , E. and Heywood , J. Charge Cooling Effects on Knock Limits in SI DI Engines Using Gasoline/Ethanol Blends: Part 2-Effective Octane Numbers SAE Technical Paper 2012-01-1284 2012 10.4271/2012-01-1284
- Cruff , L. , Kaiser , M. , Krause , S. , Harris , R. et al. EBDI® - Application of a Fully Flexible High BMEP Downsized Spark Ignited Engine SAE Technical Paper 2010-01-0587 2010 10.4271/2010-01-0587
- Grandin , B. , Ångström , H. , Stålhammar , P. , and Olofsson , E. Knock Suppression in a Turbocharged SI Engine by Using Cooled EGR SAE Technical Paper 982476 1998 10.4271/982476
- Amann , M. , Alger , T. , and Mehta , D. The Effect of EGR on Low-Speed Pre-Ignition in Boosted SI Engines SAE Int. J. Engines 4 1 235 245 2011 10.4271/2011-01-0339
- Cairns , A. , Fraser , N. , and Blaxill , H. Pre Versus Post Compressor Supply of Cooled EGR for Full Load Fuel Economy in Turbocharged Gasoline Engines SAE Technical Paper 2008-01-0425 2008 10.4271/2008-01-0425
- Kirwan , J. , Shost , M. , Roth , G. , and Zizelman , J. 3-Cylinder Turbocharged Gasoline Direct Injection: A High Value Solution for Low CO2 and NOx Emissions SAE Int. J. Engines 3 1 355 371 2010 10.4271/2010-01-0590
- Hancock , D. , Fraser , N. , Jeremy , M. , Sykes , R. et al. A New 3 Cylinder 1.2l Advanced Downsizing Technology Demonstrator Engine SAE Technical Paper 2008-01-0611 2008 10.4271/2008-01-0611
- Goto , T. , Hatamura , K. , Takizawa , S. , Hayama , N. et al. Development of V6 Miller Cycle Gasoline Engine SAE Technical Paper 940198 1994 10.4271/940198
- Anderson , M. , Assanis , D. , and Filipi , Z. First and Second Law Analyses of a Naturally-Aspirated, Miller Cycle, SI Engine with Late Intake Valve Closure SAE Technical Paper 980889 1998 10.4271/980889
- Noma , K. , Iwamoto , Y. , Murakami , N. , Iida , K. et al. Optimized Gasoline Direct Injection Engine for the European Market SAE Technical Paper 980150 1998 10.4271/980150
- Borland , M. , Zhao , F. Exhaust Manifold Design for Lower Converter-In HC Emisions and Faster Catalyst Light-Off via Secondary Air Injection Global Powertrain Congress September 23 25 2003 Ann Arbor, Michigan, USA
- Litke , B. The Influence of Inlet Angles in Inlet Ports on the Scavenging Process in Two-Stroke Uniflow-Scavenged Engine Transactions on the Built Environment 45 1999 10.2495/MT990261
- Richardson , J. A Practical Treatise on the Theory, Design, Construction and Use of the The Modern Steam Engine 139 147 D. Van Nostrand Company New York 1908
- Bucknell , J. Cylinder Head For Improved Fluid Flow Performance US Patent 8,251,037
- Arnold , S. , Calta , D. , Dullack , K. , Judd , C. et al. Development of an Ultra-High Pressure Ratio Turbocharger SAE Technical Paper 2005-01-1546 2005 10.4271/2005-01-1546
- Buri , S. , Kubach , H. and Spicher , U. Effects of increased injection pressures of up to 1000 bar - opportunities in stratified operation in a direct-injection spark-ignition engine International Journal of Engine Research December 2010 11 6 473 484 10.1243/14680874JER608
- Schumann , F. The Influence of Injection Pressures of up to 800 bar on Catalyst Heating Operation in Gasoline Direct Injection Engines Comodia 2012 July 23 26 Fukuoka, Japan
- Häntsche , J. , Krause , G. , Velji , A. , and Spicher , U. High Pressure Fuel Pump for Gasoline Direct Injection based on Ceramic Components SAE Technical Paper 2005-01-2103 2005 10.4271/2005-01-2103
- Pfister , C. Use of ceramic sliding systems in a prototype gasoline pump with operating pressures of up to 80 MPa 36th International conference and exposition on advanced ceramics and composites 22 27 01 2012 Daytona Beach, USA
- Pfister , C. Experimental investigations on a high pressure gasoline pump with ceramic sliding systems operating at up to 80 MPa. SIA Spark Ignition International Conference 2011 Strasbourg, France
- Pfister , C. Increasing the operating pressure of gasoline injection pumps via ceramic sliding systems 35th International conference and exposition on advanced ceramics and composites 23 28 01 2011 Daytona Beach, USA
- Javaherian , H. Fuel Volatility Detection and Compensation During Cold Engine Start US Patent 6,360,726
- Javaherian , H. Method and Apparatus for Engine Torque Sensing US Patent 7,389,682
- Javaherian , H. , Brown , A. and Nolan , M. Method and Apparatus for Controlling Combustion Phasing in an Internal Combustion Engine US Patent Application US 2010/0212632
- Javaherian , H. , Haskara , I. and Dagel , O. High Accuracy IMEP Computational Technique using a Low-Resolution Encoder and an Indirect Integration Process US Patent Application US 2011/0208407
- Matsuno Masataka 2002 Ignition Device For Internal Combustion Engine Hanshin Electric Co Ltd
- Attard , W. and Blaxill , H. A Gasoline Fueled Pre-Chamber Jet Ignition Combustion System at Unthrottled Conditions SAE Technical Paper 2012-01-0386 2012 10.4271/2012-01-0386
- Shiraishi , T. , Kakuho , A. , Urushihara , T. , Cathey , C. et al. A Study of Volumetric Ignition Using High-Speed Plasma for Improving Lean Combustion Performance in Internal Combustion Engines SAE Int. J. Engines 1 1 399 408 2009 10.4271/2008-01-0466
- Vehicle Waste Heat Recovery System And Method Of Operation US Patent Application US 2011/0220729
- Hensley , R. , Newman , J. , Rogers , M. Battery Technology Charges Ahead McKinsey Quarterly, McKinsey & Company July 2012
- Franzese , Oscar Effect of Weight and Roadway Grade on the Fuel Economy of Class-8 Freight Trucks Oak Ridge National Laboratory October 2011
- 2010 Winnebago Sightseer, Retail Price List - August 3, 2009 Winnebago Industries, Inc. Forest City, IA 40436