This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
A Design Guide for Wet Multiple Plate Clutches on Forklift Truck Transmissions Considering Strength Balance between Friction Material and Mating Plate
Technical Paper
2013-01-0231
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
Wet multiple plate clutches consist of friction plates, on which a friction material is bonded, and mating plates that are plain metal plates. Since the frequency and the range of load in the field of forklift trucks vary widely and are more severe than those for passenger cars, the wet multiple plate clutches on forklift trucks are often damaged. Damaged clutches that were returned from the field typically had 3 types of symptoms: 1.Only the friction material was damaged, 2.Only the mating plates were deformed, 3.Both symptoms were observed. It was clear that the cause of these symptoms depended on the difference of the operating application and the strength criteria of each part. This showed that a design guide for wet multiple plate clutches considering the strength balance between the two parts according to the work application was required. The relevant flow chart of this design process was proposed.
Recommended Content
Technical Paper | The Allison AT-540 Automatic Transmission for Trucks |
Technical Paper | Model Based Design Accelerates the Development of Mechanical Locomotive Controls |
Ground Vehicle Standard | Park Standard for Automatic Transmissions |
Authors
Citation
Okabe, K. and Houjoh, H., "A Design Guide for Wet Multiple Plate Clutches on Forklift Truck Transmissions Considering Strength Balance between Friction Material and Mating Plate," SAE Technical Paper 2013-01-0231, 2013, https://doi.org/10.4271/2013-01-0231.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 | ||
Unnamed Dataset 2 | ||
Unnamed Dataset 3 |
Also In
References
- Ito , H. , Yamamoto , T. , and Yamagishi , N. Effect of Oil Viscosity on the Friction Characteristics of a Paper-Based Facing for a Wet Clutch Journal of Japanese Society of Tribologists. 34 9 662 668 1989
- Eguchi , M. , Takesue , M. , and Yamamoto , T. Friction Characteristic of a Paper-Based Facing for a Wet Clutch Journal of Japanese Society of Tribologists. 36 7 535 542 1991
- Eguchi , M. and Yamamoto , T. Breaking-Away Behavior of a Paper-Based Facing for a Wet Clutch Journal of Japanese Society of Tribologists. 37 12 1011 1017 1992
- Eguchi , M. , Kuwahara , Y. , and Yamamoto , T. Effect of Surface Temerature on Steady-State Friction Characteristics of a Paper-Based Facing For a Wet Clutch Journal of Japanese Society of Tribologists. 38 7 649 655 1993
- Eguchi , M. , Kuwahara , Y. , and Yamamoto , T. Study on Origin of Friction of a Paper-Based Facing for a Wet Clutch Journal of Japanese Society of Tribologists. 39 12 1081 1088 1994
- Miyoshi , T. Friction Characteristics and Porosity of Friction Plate NSK Technical Journal. 655 25 31 1993
- Natsumeda , S. On the Engagement Mechanism of a Friction Plate NSK Technical Journal. 655 32 38 1993
- Dasai , M. Noise and Vibration in Wet Brake and Wet Clutch Journal of Japanese Society of Tribologists. 35 5 326 330 1990
- Miura , T. , Sekine , N. , Azegami , T. , and Murakami , Y. Friction Property of Segment Bonded Type Wet Clutches for Automatic Transmission Honda R & D Technical Review. 10 142 149 1998
- Miyoshi , T. Wet Clutch Journal of Japanese Society of Tribologists. 47 9 699 704 2002
- Gu , X. and Miyoshi , T. Thermal Issues and Their Countermeasures on Wet Clutch Friction Materials Journal of Japanese Society of Tribologists. 50 1 33 38 2005
- Kato , Y. , Akasaka , R. , Yamazaki , T. , and Mori , Y. Measurements of Surface Temperature Distributions of Clutch Discs and a Band Drum of an Automatic Transmission Journal of Japanese Society of Tribologists. 41 4 340 347 1996
- Saito , T. , Kotegawa , T. , Matsuura , Y. , Tanaka , S. , and Ohtsuki , K. Study of Durability Prediction Considering Wear Properties for Multiple Plate Clutches Honda R & D Technical Review. 18 2 155 162 2006
- Okabe , K. , Fujimoto , A. , and Mukai , K. Proposition of Field Life Design Method for Wet Multiple Plate Clutches (First Report) Transactions of Society of Automotive Engineering of Japan. 38 6 145 150 2007
- Okabe , K. , Harasawa , T. , and Fujimo , A. Proposal of Field Life Design Method for Wet Multiple Plate Clutches (Second Report) Transactions of Society of Automotive Engineering of Japan. 39 2 305 310 2008
- Okabe , K. , Fujimo , A. , and Harasawa , T. Proposal of Field Life Design Method for Wet Multiple Plate Clutches (Third Report) Transactions of Society of Automotive Engineering of Japan. 40 4 1071 1075 2009
- Osanai , H. , Ohnuma , H. , and Kato , K. Measurement of Temperature of Frictional Surface and Durability of Paper-Based Wet Clutch Facing Journal of Japanese Society of Tribologists. 39 12 1032 1036 1994
- Morita , T. and Satumarin , K. Bulldozer Sangyou-tosyo, ltd. 96 100 1969
- Takeuchi , Y. Analysis of Thermal Stress Nissin-syuppan 96 100 1969
- National Institute for Material Science NRIM Creep Date Sheet No. 17B 1994