This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Operational Modal Analysis Techniques used for Global Modes Identification of Vehicle Body Excited from a Vehicle in Idle Engine
Technical Paper
2012-36-0639
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
With the purpose to identify the root cause of increased levels of vibration felt at idle speed in a popular vehicle prototype a study was conducted using techniques for analysis of vibration transmission between components of a vehicle, using Mechanical Vibrations Analysis and Operational Modal Analysis, for the analysis of the operational modes was used ODS - Operational Deflection Shape technique which is possible only see the shapes related to probable modes. The experimental results were compared with results for the modal analysis by Finite Element Method (FEM). The vehicles used are identical prototypes, but with different levels of vibration. Therefore, to study there is a vehicle with satisfactory levels and a second with unsatisfactory levels. This study demonstrates the methodology used to identify the cause of the different behaviors between cars and also discuss the improvements made in the body according to the results of the numerical experimental confrontation.
Authors
Citation
Abreu, R. and Moura, F., "Operational Modal Analysis Techniques used for Global Modes Identification of Vehicle Body Excited from a Vehicle in Idle Engine," SAE Technical Paper 2012-36-0639, 2012, https://doi.org/10.4271/2012-36-0639.Also In
References
- Isomura, A. Hara, T Kmiya, K. 1995 Human Factors on driver's steering wheel operation: three parameters evaluating characteristics of driver's steering wheel operations JSAE Review 16 388 410
- Pak, C.H. Lee, U.S. Hong, S.C. Song, S.K. Kim, J.H Kim, K.S 1991 A study on the tangential vibration of the steering wheel of passenger car SAE paper 912565 961 968
- Pottinger, M.G. Marshall, K.D. Lawther, J.M. Thrasher, D.B. 1986 A Review of Tire / Pavement Interaction Induced Noise and Vibration; The Tire Pavement Interface, ASTP STP 929 Pottinger, M.G. Yager, T.J. American Society for Testing and Materials Philadelphia 183 287
- Renault Michelin 2000 Road Vibration Signal Database Human Dynamics Group, Department of Mechanical Engineering, the University of Sheffield
- Ajovalasit, M. Giacomin, J. “Human subjective response to steering wheel vibration caused by diesel engine idle” 2004 Department of Mechanical Engineering, The University of Sheffield Sheffield, UK
- Abreu, R. D. A. Brito, J. N. Filho, P. C. M. L. “Comparative Study Between the Techniques of Wavelet Decomposition and Envelope Detection for Bearing Damage Diagnosis” 2007 19th International Congress of Mechanical Engineering Brasília - DF
- Ajovalasit, M. Giacomin, J. “Analysis of variations in diesel engine idle vibration” Proc. Instn. Mech. Engrs Part D 2003 217 921 933
- Gescheider, G.A. Hoffman, K.E. Harrison, M.A. Travis, M.L. Bolanowski, S.J. “The effects of masking on vibrotactile temporal summation in the detection of sinusoidal and noise signals” J. Acoust. Soc. Am 1994 95 2 1006 1016
- Miwa, T. “Evaluation methods for vibration effect. Part 7. The vibration greatness of the pulses” Industrial Health 1968 7 143 164