Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Time and Spatially Resolved Measurements of the Interaction of Combusting Diesel Spray and Walls with Elevated Temperatures

Journal Article
2012-01-1726
ISSN: 1946-3936, e-ISSN: 1946-3944
DOI: https://doi.org/10.4271/2012-01-1726
Published September 10, 2012 by SAE International in United States
Time and Spatially Resolved Measurements of the Interaction of Combusting Diesel Spray and Walls with Elevated Temperatures
Sector:
Citation: Held, F., Werblinski, T., Vogel, T., and Wensing, M., "Time and Spatially Resolved Measurements of the Interaction of Combusting Diesel Spray and Walls with Elevated Temperatures," SAE Int. J. Engines 5(4):1709-1716, 2012, https://doi.org/10.4271/2012-01-1726.
Language: English

References

  1. Yao, M. Zheng, Z. Liu, H. “Progress and recent trends in homogeneous charge compression ignition (HCCI) engines” Progress in Energy and Combustion Science 35 398 437 2009
  2. Ochoterena, R. Andersson, S. “Time and Spatially Resolved Temperature Measurements of a Combusting Diesel Spray Impinging on a Wall,” SAE Int. J. Fuels Lubr. 1 1 970 983 2009 10.4271/2008-01-1608
  3. Naber, J. Farrell, P. “Hydrodynamics of Droplet Impingement on a Heated Surface,” SAE Technical Paper 930919 1993 10.4271/930919
  4. Allocca, L. Andreassi, L. Ubertini, S. “Evaluation of Splash Models with High-Pressure Diesel Spray,” SAE Technical Paper 2006-01-1117 2006 10.4271/2006-01-1117
  5. Baumgarten, C. “Mixture Formation in internal Combustion Engines, Heat and Mass Transfer” Springer New York 2006
  6. Meingast, U. Staudt, M. Reichelt, L. Renz, U. et al. “Analysis of Spray/Wall Interaction Under Diesel Engine Conditions,” SAE Technical Paper 2000-01-0272 2000 10.4271/2000-01-0272
  7. Yusmady, M.A. Masataka, A. “Deposition characteristics of diesel and bio-diesel fuels” Fuel 88 November 2009
  8. Stanglmaier, R. Roberts, C. Moses, C. “Vaporization of Individual Fuel Drops on a Heated Surface: A Study of Fuel-Wall Interactions within Direct-Injected Gasoline (DIG) Engines,” SAE Technical Paper 2002-01-0838 2002 10.4271/2002-01-0838
  9. Huang, Y. Matthews, R. Ellzey, J. Dai, W. “Effects of Fuel Volatility, Load, and Speed on HC Emissions Due to Piston Wetting,” SAE Technical Paper 2001-01-2024 2001 10.4271/2001-01-2024
  10. Puschmann, F. “Experimentelle Untersuchung der Spraykühlung zu Qualitätsverbesserung durch definierte Einstellung des Wärmeübergangs” Dissertation Otto-von- Guericke-Universität Magdeburg Magdeburg 2003
  11. Schünemann, E. “Experimentelle Untersuchungen zur Interaktion zwischen Einspritzstrahl und Brennraumwand bei der dieselmotorischen Einspritzung” Dissertation Lehrstuhl für Technische Thermodynamik, Friedrich-Alexander-Universität Erlangen-Nürnberg Leipertz, Dr.-Ing. A. Prof. Berichte zur Energie- und Verfahrenstechnik, Heft 99.4 Erlangen 1999
  12. Schünemann, E. Fedrow, S. Leipertz, A. “Droplet Size and Velocity Measurements for the Characterization of a DI-Diesel Spray Impinging on a Flat Wall,” SAE Technical Paper 982545 1998 10.4271/982545
  13. Egermann, J. Taschek, M. Leipertz, A. “Spray/Wall Interaction Influenes on the Diesel Engine Mixture Formation Process Investigated by Spontaneous Raman Scattering” Proceedings of the Combustion Institute 29 617 623 2002
  14. Popiolek, G. “Sprühstrahl-Wand-Wechselwirkung bei der Benzindirekteinspritzung” Dissertation Otto-von-Guericke-Universität Magdeburg Magdeburg 2007
  15. Andreassi, L. Ubertini, S. Allocca, L. “Experimental and numerical analysis of high pressure diesel spray-wall interaction” International Journal of Multiphase Flow 33 2007 742 765
  16. Vogel, T. Wensing, M. Leipertz, A. “Influence of the fuel quantity on the spray formation and ignition under current engine relevant conditions” JSAE 201149199
  17. DIN EN 590 2009 “Automotive fuels - Diesel - Requirements and test methods” 2009
  18. Tree, D. R. Svensson, K. I. “Soot processes in compression ignition engines” Progress in Energy and Combustion Science 33 272 309 2007

Cited By

Recommended Content

Journal Article Equivalence Ratio Distributions in a Light-Duty Diesel Engine Operating under Partially Premixed Conditions
Technical Paper The Performance Improvement of Aluminium Alloy Diesel Engine Pistons by Squeeze Casting
Technical Paper The Effect of Ceramic Thermal Barrier Combustion Chamber Coatings on the Performance and Efficiency of a Small Diesel Engine