This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
A Comparison of Combustion and Emissions of Diesel Fuels and Oxygenated Fuels in a Modern DI Diesel Engine
Journal Article
2012-01-1695
ISSN: 1946-3952, e-ISSN: 1946-3960
Sector:
Topic:
Citation:
Kurtz, E., Kuhel, D., Anderson, J., and Mueller, S., "A Comparison of Combustion and Emissions of Diesel Fuels and Oxygenated Fuels in a Modern DI Diesel Engine," SAE Int. J. Fuels Lubr. 5(3):1199-1215, 2012, https://doi.org/10.4271/2012-01-1695.
Language:
English
References
- Knothe, G. “‘Designer’ Biodiesel: Optimizing Fatty Ester Composition to Improve Fuel Properties” Energy & Fuels 22 1358 1364 2008
- Broch, A. Hoekman, S. Gertler, A. Robbins, C. et al. “Biodistillate Transportation Fuels 3 - Life Cycle Impacts,” SAE Int. J. Fuels Lubr. 2 2 233 261 2010 10.4271/2009-01-2768
- Lapuerta, M. Armas, O. Rodríguez-Fernández, J. “Effect of Biodiesel Fuels on Diesel Engine Emissions,” Progress in Energy and Combustion Science 34 198 223 2008
- Mueller, C. Boehman, A. Martin, G. “An Experimental Investigation of the Origin of Increased NOx Emissions When Fueling a Heavy-Duty Compression-Ignition Engine with Soy Biodiesel,” SAE Int. J. Fuels Lubr. 2 1 789 816 2009 10.4271/2009-01-1792
- Hoekman, S. Kent Robbins, Curtis “Review of the Effects of Biodiesel on NOx Emissions” Fuel Processing Technology 96 237 249 2012
- Wadumesthrige, K. Ara, M. Salley, S. O. Ng, K. Y. S. “Investigation of Lubricity Characteristics of Biodiesel in Petroleum and Synthetic Fuel” Energy & Fuels 23 2229 2234 2009
- Dunn, R. O. “Crystallization Behavior of Fatty Acid Methyl Esters” Journal of the American Oil Chemists Society 85 961 72 2008
- Knothe, G. “Some aspects of biodiesel oxidative stability” Fuel Processing Technology 88 669 677 2007
- Tang, H. Salley, S. O. Ng, K. Y. S. “Fuel properties and precipitate formation at low temperature in soy-, cottonseed-, and poultry fat-based biodiesel blends” Fuel 87 3006 3017 2008
- Dunn, R. O. “Effects of Minor Constituents on Cold Flow Properties and Performance of Biodiesel” Progress in Energy and Combustion Science 35 481 489 2009
- Ezeji, T. C. Qureshi, N. Blaschek, H.P. “Bioproduction of butanol from biomass: from genes to bioreactors” Current Opinion in Biotechnology 18 220 227 2007
- Cheng, K.K. Zhao, X.B. Zeng, J. Zhang, J.A. “Biotechnological production of succinic acid: current state and perspectives” Biofuels, Bioproducts and Biorefining 6 302 318 2012
- Mase, Y. Kawashima, J. Sato, T. Eguchi, M. “Nissan's New Multivalve DI Diesel Engine Series,” SAE Technical Paper 981039 1998 10.4271/981039
- Kimura, S. Aoki, O. Ogawa, H. Muranaka, S. et al. “New Combustion Concept for Ultra-Clean and High-Efficiency Small DI Diesel Engines,” SAE Technical Paper 1999-01-3681 1999 10.4271/1999-01-3681
- Kimura, S. Aoki, O. Kitahara, Y. Aiyoshizawa, E. “Ultra-Clean Combustion Technology Combining a Low-Temperature and Premixed Combustion Concept for Meeting Future Emission Standards,” SAE Technical Paper 2001-01-0200 2001 10.4271/2001-01-0200
- Akihama, K. Takatori, Y. Inagaki, K. Sasaki, S. et al. “Mechanism of the Smokeless Rich Diesel Combustion by Reducing Temperature,” SAE Technical Paper 2001-01-0655 2001 10.4271/2001-01-0655
- Iwabuchi, Y. Kawai, K. Shoji, T. Takeda, Y. “Trial of New Concept Diesel Combustion System - Premixed Compression-Ignited Combustion -,” SAE Technical Paper 1999-01-0185 1999 10.4271/1999-01-0185
- Petersen, B. Ekoto, I. Miles, P. “An Investigation into the Effects of Fuel Properties and Engine Load on UHC and CO Emissions from a Light-Duty Optical Diesel Engine Operating in a Partially Premixed Combustion Regime,” SAE Int. J. Engines 3 2 38 55 2010 10.4271/2010-01-1470
- Bunting, B. Eaton, S. Crawford, R. Xu, Y. et al. “Performance of Biodiesel Blends of Different FAME Distributions in HCCI Combustion,” SAE Technical Paper 2009-01-1342 2009 10.4271/2009-01-1342
- Tompkins, B. Song, H. Bittle, J. Jacobs, T. “Biodiesel Later-Phased Low Temperature Combustion Ignition and Burn Rate Behavior on Engine Torque,” SAE Technical Paper 2012-01-1305 2012 10.4271/2012-01-1305
- Northrop, W. Bohac, S. Assanis, D. “Premixed Low Temperature Combustion of Biodiesel and Blends in a High Speed Compression Ignition Engine,” SAE Int. J. Fuels Lubr. 2 1 28 40 2009 10.4271/2009-01-0133
- ASTM D2500-05 Standard Test Method for Cloud Point of Petroleum Products ASTM International 2005
- ASTM 6371-05 Standard Test Method for Cold Filter Plugging Point of Diesel and Heating Fuels ASTM International 2005
- ASTM 975-07 Standard Specification for Cloud Diesel Fuel Oils ASTM International 2007
- Deraad, S. Fulton, B. Gryglak, A. Hallgren, B. et al. “The New Ford 6.7L V-8 Turbocharged Diesel Engine,” SAE Technical Paper 2010-01-1101 2010 10.4271/2010-01-1101
- Styron, J. Baldwin, B. Fulton, B. Ives, D. et al. “Ford 2011 6.7L Power Stroke® Diesel Engine Combustion System Development,” SAE Technical Paper 2011-01-0415 2011 10.4271/2011-01-0415
- Röttger, Daniel Vigild, Christian Tumelaire, Charles Karvounis, Evangelos Calendini, Pierre Olivier “A model based approach for diesel combustion control,” Aachener Kolloquium Fahrzeug- und Motorentechnik 2006 2006
- Dodd, A. Holubecki, Z. “The Measurement of Diesel Exhaust Smoke,” MIRA Research Report 1965/10 1965
- Spindt, R. “Air-Fuel Ratios from Exhaust Gas Analysis,” SAE Technical Paper 650507 1965 10.4271/650507
- Röpke, S. Schweimer, G. Strauss, T. “NOx Formation in Diesel Engines for Various Fuels and Intake Gases,” SAE Technical Paper 950213 1995 10.4271/950213
- Tsunemoto, H. Ishitani, H. “The Role of Oxygen in Intake and Exhaust on NO Emission, Smoke and BMEP of a Diesel Engine with EGR System,” SAE Technical Paper 800030 1980 10.4271/800030
- Mitchell, D. Pinson, J. Litzinger, T. “The Effects of Simulated EGR via Intake Air Dilution on Combustion in an Optically Accessible DI Diesel Engine,” SAE Technical Paper 932798 1993 10.4271/932798
- Ruona, William Ford Technical Leader, Personal Communication
- Su, T. Chang, C. Reitz, R. Farrell, P. et al. “Effects of Injection Pressure and Nozzle Geometry on Spray SMD and D.I. Emissions,” SAE Technical Paper 952360 1995 10.4271/952360
- Eckerle, W. Lyford-Pike, E. Stanton, D. LaPointe, L. et al. “Effects of Methyl Ester Biodiesel Blends on NOx Emissions,” SAE Int. J. Fuels Lubr. 1 1 102 118 2009 10.4271/2008-01-0078
- Musculus, M. Lachaux, T. Pickett, L. Idicheria, C. “End-of-Injection Over-Mixing and Unburned Hydrocarbon Emissions in Low-Temperature-Combustion Diesel Engines,” SAE Technical Paper 2007-01-0907 2007 10.4271/2007-01-0907
- Musculus, M. Kattke, K. “Entrainment Waves in Diesel Jets,” SAE Int. J. Engines 2 1 1170 1193 2009 10.4271/2009-01-1355
- Siebers, D.L. Higgins, B.S. “Effects of Injector Conditions on the Flame Lift-Off Length of DI Diesel Sprays,” Conference on Thermalfluidynamic Processes in Diesel Engines Sept. 14 15 2000
- Higgins, B. Siebers, D. “Measurement of the Flame Lift-Off Location on DI Diesel Sprays Using OH Chemiluminescence,” SAE Technical Paper 2001-01-0918 2001 10.4271/2001-01-0918
- Dec, J. “A Conceptual Model of DI Diesel Combustion Based on Laser-Sheet Imaging,” SAE Technical Paper 970873 1997 10.4271/970873
- Pickett, L. Siebers, D. “Fuel Effects on Soot Processes of Fuel Jets at DI Diesel Conditions,” SAE Technical Paper 2003-01-3080 2003 10.4271/2003-01-3080
- Mueller, C. “The Quantification of Mixture Stoichiometry When Fuel Molecules Contain Oxidizer Elements or Oxidizer Molecules Contain Fuel Elements,” SAE Technical Paper 2005-01-3705 2005 10.4271/2005-01-3705
- Pickett, L. Siebers, D. Idicheria, C. “Relationship Between Ignition Processes and the Lift-Off Length of Diesel Fuel Jets,” SAE Technical Paper 2005-01-3843 2005 10.4271/2005-01-3843
- Hochhauser, A. M. “Review of prior studies of fuel effects on vehicle emissions” CRC Report No. E-84 Coordinating Research Council Alpharetta, Georgia 2008