This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Mileage Influence on Conversion Efficiency of Catalytic Converter from In-Use Vehicles

Journal Article
2012-01-1672
ISSN: 1946-3936, e-ISSN: 1946-3944
Published September 10, 2012 by SAE International in United States
Mileage Influence on Conversion Efficiency of Catalytic Converter from In-Use Vehicles
Sector:
Citation: Tartakovsky, L., Baibikov, V., Veinblat, M., Popescu, D. et al., "Mileage Influence on Conversion Efficiency of Catalytic Converter from In-Use Vehicles," SAE Int. J. Engines 5(4):1617-1623, 2012, https://doi.org/10.4271/2012-01-1672.
Language: English

References

  1. Müller-Haas, K. Rice, M. Dean, R. Olsen, R. et al. “Development of Advanced Metallic Substrate Design for Close Coupled Converter Application,” SAE Technical Paper 2007-01-1262 2007 10.4271/2007-01-1262
  2. Inaguma, T. Konya, S. Sakamoto, H. Yamauchi, T. et al. “New Type of Metal Substrates for Catalytic Converters Durability for Elevated Temperature,” SAE Technical Paper 2007-01-1264 2007 10.4271/2007-01-1264
  3. Watson, M. González, J. “Engineered Mat Technology for High Temperature Close Coupled Applications,” SAE Technical Paper 2007-01-1077 2007 10.4271/2007-01-1077
  4. Nagel, T. Diringer, J. “Minimum Test Requirements for High Cell-Density, Ultra-Thin Wall Catalyst Supports; Part I,” SAE Technical Paper 2000-01-0495 2000 10.4271/2000-01-0495
  5. Arnold, L. Collins, N. Cooper, J. Eyre, D. et al. “Development and Application of New Low Rhodium Three-Way Catalyst Technology,” SAE Technical Paper 2007-01-0046 2007 10.4271/2007-01-0046
  6. Bonnefoy, F. De Meyer, J. Steenackers, P. “High Flexibility in Converter Design by Using Modular Block Metallic Substrates,” SAE Technical Paper 2000-01-0497 2000 10.4271/2000-01-0497
  7. Brisley, R. Collins, N. French, C. Morris, D. et al. “Development of Advanced Platinum-Rhodium Catalyst for Future Emissions Requirements,” SAE Technical Paper 1999-01-3627 1999 10.4271/1999-01-3627
  8. Williamson, W. Denison, G. Starin, G. Robota, H. “Palladium-Rhodium Catalyst Strategies for LEV Emission Applications,” SAE Technical Paper 972844 1997 10.4271/972844
  9. Williamson, W. Dou, D. Robota, H. “Dual-Catalyst Underfloor LEV/ULEV Strategies for Effective Precious Metal Management,” SAE Technical Paper 1999-01-0776 1999 10.4271/1999-01-0776
  10. Lee, S. Bae, C. Lee, Y. Han, T. “Effects of Engine Operating Conditions on Catalytic Converter Temperature in an SI Engine,” SAE Technical Paper 2002-01-1677 2002 10.4271/2002-01-1677
  11. Wang, Q. Zhao, B. Li, B. Zhou, R. “Application or rare earth modified Zr-based Ceria-Zirconia solid solution in three way catalyst for automotive emission control.” Environ. Sci. Technol. 2010 44 3870 3875 10.1021/es903957e
  12. Rohart, E. Verdier, S. Takemori, H. Suda, E. et al. “High OSC CeO2/ZrO2 Mixed Oxides Used as Preferred Metal Carriers for Advanced Catalysts,” SAE Technical Paper 2007-01-1057 2007 10.4271/2007-01-1057
  13. Lloyd, S. M. Lave, L.B. Matthews, H. S. “Life cycle benefits of using nanotechnology to stabilize platinum-group metal particles in automotive catalysts.” Environ. Sci. Technol. 2005 39 1384 1392 10.1021/es049325w
  14. More, K. Kenik, E. Coffey, D. Geer, T. et al. “Thermally-Induced Microstructural Changes in a Three-Way Automotive Catalyst,” SAE Technical Paper 972905 1997 10.4271/972905
  15. Bomback, J. L. Wheeler, M. A. Tabock, J. Janowsky, J. D. “Distribution of contaminants in used automotive emission catalysts.” Environ. Sci. Technol. 1975 9 2 139 143
  16. Fishel, N. A. Lee, R. K. Wilhelm, F. C. “Poisoning of vehicle control catlysts by sulfur compounds.” Environ. Sci. Technol. 1974 8 3 260 267
  17. Arapatsakos, C.I. Sparis, P.D. “Catalyst regeneration via chemical treatment and emission tests at idle speeds.” Proc. Instn. Mech. Engrs. 1999 213 359 364 10.1177/095440709921300405
  18. Ball, D. Mohammed, A. Schmidt, W. “Application of Accelerated Rapid Aging Test (RAT) Schedules with Poisons: The Effects of Oil Derived Poisons, Thermal Degradation and Catalyst Volume on FTP Emissions,” SAE Technical Paper 972846 1997 10.4271/972846
  19. Beck, D. Sommers, J. DiMaggio, C. Monroe, D. et al. “Impact of Oil-Derived Catalyst Poisons on FTP Performance of LEV Catalyst Systems,” SAE Technical Paper 972842 1997 10.4271/972842

Cited By