This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Comparison of In-Cylinder Soot Evolution in an Optically Accessible Engine Fueled with JP-8 and ULSD

Journal Article
2012-01-1315
ISSN: 1946-3952, e-ISSN: 1946-3960
Published April 16, 2012 by SAE International in United States
Comparison of In-Cylinder Soot Evolution in an Optically Accessible Engine Fueled with JP-8 and ULSD
Sector:
Citation: Yu, X., Zha, K., Florea, R., and Jansons, M., "Comparison of In-Cylinder Soot Evolution in an Optically Accessible Engine Fueled with JP-8 and ULSD," SAE Int. J. Fuels Lubr. 5(2):875-891, 2012, https://doi.org/10.4271/2012-01-1315.
Language: English

References

  1. Tree, D.R. Svensson, K.I. Soot processes in compression ignition engines Progress in Energy and Combustion Science 2007 33 272 309
  2. Hofeldt, D. Chen, G. “Transient Particulate Emissions from Diesel Buses During the Central Business District Cycle,” SAE Technical Paper 960251 1996 10.4271/960251
  3. Papagiannakis, R. Kotsiopoulos, P. Hountalas, D. Yfantis, E. “Single Fuel Research Program Comparative Results of the Use of JP-8 Aviation Fuel versus Diesel Fuel on a Direct Injection and Indirect Injection Diesel Engine,” SAE Technical Paper 2006-01-1673 2006 10.4271/2006-01-1673
  4. Nargunde, J. Jayakumar, C. Sinha, A. Acharya, K. et al. “Comparison between Combustion, Performance and Emission Characteristics of JP-8 and Ultra Low Sulfur Diesel Fuel in a Single Cylinder Diesel Engine,” SAE Technical Paper 2010-01-1123 2010 10.4271/2010-01-1123
  5. Fernandes, G. et al. Impact of military JP-8 fuel on heavy-duty diesel engine performance and emissions Journal of the Automobile Engineering 2007 221 957 70
  6. Zha, K. Florea, R.-C. Jansons, M. Comparison of Soot Evolution Using High-speed CMOS Color Camera and Two-color Thermometry in An Optical Diesel Engine Fueled with B20 Biodiesel Blend and Ultra-low Sulfur Diesel Proceeding of the 2011 Fall Conference of the ASME Internal Combustion Engine Division 2011 Morgantown, West Virginia, USA
  7. Singh, S. Reitz, R. Musculus, M. “2-Color Thermometry Experiments and High-Speed Imaging of Multi-Mode Diesel Engine Combustion,” SAE Technical Paper 2005-01-3842 2005 10.4271/2005-01-3842
  8. Ciatti, S. Blobaum, E. Foster, D. “Determination of Diesel Injector Nozzle Characteristics Using Two-Color Optical Pyrometry,” SAE Technical Paper 2002-01-0746 2002 10.4271/2002-01-0746
  9. Musculus, M. “Measurements of the Influence of Soot Radiation on In-Cylinder Temperatures and Exhaust NOx in a Heavy-Duty DI Diesel Engine,” SAE Technical Paper 2005-01-0925 2005 10.4271/2005-01-0925
  10. Murphy, L. Rothamer, D. “Effects of Cetane Number on Jet Fuel Combustion in a Heavy-Duty Compression Ignition Engine at High Load,” SAE Technical Paper 2011-01-0335 2011 10.4271/2011-01-0335
  11. Tsujimura, T. Goto, S. “Study on Improvement of Combustion and Effect of Fuel Property in Advanced Diesel Engine,” SAE Technical Paper 2010-01-1117 2010 10.4271/2010-01-1117
  12. B, H.J. Internal Combustion Engine Fundamentals 1988
  13. Jansons, M. Florea, R. Zha, K. Gingrich, E. “The Effect of HCHO Addition on Combustion in an Optically Accessible Diesel Engine Fueled with JP-8,” SAE Int. J. Fuels Lubr. 3 2 671 690 2010 10.4271/2010-01-2136
  14. Jansons, M. Zha, K. Florea, R. Taraza, D. et al. “Effect of Swirl Ratio and Wall Temperature on Pre-lnjection Chemiluminescence During Starting of an Optical Diesel Engine,” SAE Int. J. Engines 2 2 173 185 2010 10.4271/2009-01-2712
  15. Namazian, M. Heywood, J. “Flow in the Piston-Cylinder-Ring Crevices of a Spark-Ignition Engine: Effect on Hydrocarbon Emissions, Efficiency and Power,” SAE Technical Paper 820088 1982 10.4271/820088
  16. Patel, A. Kong, S. Reitz, R. “Development and Validation of a Reduced Reaction Mechanism for HCCI Engine Simulations,” SAE Technical Paper 2004-01-0558 2004 10.4271/2004-01-0558
  17. Genzale, C. Reitz, R. Musculus, M. “Optical Diagnostics and Multi-Dimensional Modeling of Spray Targeting Effects in Late-Injection Low-Temperature Diesel Combustion,” SAE Int. J. Engines 2 2 150 172 2010 10.4271/2009-01-2699
  18. Müller, E. Zillmer, M. “Modeling of Nitric Oxide and Soot Formation in Diesel Engine Combustion,” SAE Technical Paper 982457 1998 10.4271/982457
  19. Walls, J.R. Strickland-Constable, R.F. Oxidation of carbon between 1000-2400°C Carbon 1964 1 3 333 338 10.1016/0008-6223(64)90288-x
  20. Hottel, H.C. Broughton, F.P. Determination of True Temperature and Total Radiation from Luminous Gas Flames Industrial & Engineering Chemistry Analytical Edition 1932 4 2 166 175 10.1021/ac50078a004
  21. Yan, J. Borman, G.L. Analysis and in-cylinder measurement of particulate radiant emissions and temperature in a direct-injection diesel engine 1988 25
  22. Kamimoto, T. Murayama, Y. Re-examination of the emissivity of diesel flames International Journal of Engine Research 2011 10.1177/1468087411418170
  23. Dalzell, W.H. Sarofim, A.F. Optical constants of soot and their application to heat-flux calculations Transactions of the ASME. Series C, Journal of Heat Transfer 1969 91 100 4
  24. Zhao, H. Ladammatos, N. Engine Combustion Instrumentation and Diagnostics 2001
  25. Zha, K. Yu, X. Florea, R. Jansons, M. “Impact of Biodiesel Blends on In-cylinder Soot Temperature and Concentrations in A Small-Bore Optical Diesel Engine,” SAE Technical Paper 2012-01-1311 2012

Cited By