This content is not included in your SAE MOBILUS subscription, or you are not logged in.

xD+1D Catalyst Simulation-A Numerical Study on the Impact of Pore Diffusion

Journal Article
2012-01-1296
ISSN: 1946-3936, e-ISSN: 1946-3944
Published April 16, 2012 by SAE International in United States
xD+1D Catalyst Simulation-A Numerical Study on the Impact of Pore Diffusion
Sector:
Citation: Edelbauer, W., Kutschi, S., and Wurzenberger, J., "xD+1D Catalyst Simulation-A Numerical Study on the Impact of Pore Diffusion," SAE Int. J. Engines 5(3):1459-1476, 2012, https://doi.org/10.4271/2012-01-1296.
Language: English

References

  1. Konstandopoulos, A. Kostoglou, M. Vlachos, N. Kladopoulou, E. “Progress in Diesel Particulate Filter Simulation,” SAE Technical Paper 2005-01-0946 2005 10.4271/2005-01-0946
  2. Pfeifer, M. Votsmeier, M. Kögel, M. Spurk, P. et al. “The Second Generation of Catalyzed Diesel Particulate Filter Systems for Passenger Cars - Particulate Filters with Integrated Oxidation Catalyst Function-,” SAE Technical Paper 2005-01-1756 2005 10.4271/2005-01-1756
  3. Mizuno, T. Suzuki, J. “Development of a New DPNR Catalyst,” SAE Technical Paper 2004-01-0578 2004 10.4271/2004-01-0578
  4. He, Y. Brown, D. Lu, S. Paratore, M. et al. “Opportunities and Challenges for Blended 2-Way SCR/DPF Aftertreatment Technologies,” SAE Technical Paper 2009-01-0274 2009 10.4271/2009-01-0274
  5. Chandler, G. Cooper, B. Harris, J. Thoss, J. et al. “An Integrated SCR and Continuously Regenerating Trap System to Meet Future NOx and PM Legislation,” SAE Technical Paper 2000-01-0188 2000 10.4271/2000-01-0188
  6. Votsmaier, M. “Simulation of NH3-Slip Catalysts” CLEERS DOE Crosscut Workshop on Lean Emissions Reduction Simulation UofM 2011
  7. Ottaviani, E. Jean, E. Albert, H. Amon, B. et al. “Dual Line Exhaust Design Optimisation to Maximize SCR Catalyst Efficiency thru Improved Ammonia Distribution,” SAE Technical Paper 2009-01-0914 2009 10.4271/2009-01-0914
  8. Henrichsen, Lars “Expanding Use of AVL BOOST for Aftertreatment Modeling at Cummins” AVL Advanced Simulation Technologies International Users Conference 2011 Graz, Austria June 28 th 30 th 2011
  9. Wurzenberger, J. Bardubitzki, S. Bartsch, P. Katrasnik, T. “Real Time Capable Pollutant Formation and Exhaust Aftertreatment Modeling-HSDI Diesel Engine Simulation,” SAE Technical Paper 2011-01-1438 2011 10.4271/2011-01-1438
  10. Depcik, C. Assanis, D. “One-dimensional automotive catalyst modeling” Progress in Energy and Combustion Science 31 4 308 369 2005
  11. Froment, G. F. Bishoff, K. B. “Chemical Reactor Analysis and Design” John Wiley & Sons Inc. New York, London, Sydney 1990
  12. Tavera, E. M. “Analytical expression of the non-isothermal effectiveness factor: the n'th order reaction in a slab geometry” Chemical Engineering Science 60 2005 907 916 2005
  13. Dadvar, M. Sahimi, M. “The effectiveness diffusivities in porous media with and without nonlinear reactions” Chemical Engineering Science 62 2007 1466 1476 2007
  14. Kim, D. H. Lee, J. “A robust iterative method of computing effectiveness factors in porous catalysts” Chemical Engineering Science 59 2004 2253 2263 2004
  15. Hayes, R.E. Kolackowski, S. T. “Mass and Heat Transfer Effects in Catalytic Monolith Reactions” Chemical Engineering Science 49 1994 3587 3599 1994
  16. Papadias, D. Edsberg, L. Björnbom, P. “Simplified method for effectiveness factor calculation in irregular geometries of washcoats” Chemical Engineering Science 55 2000 1447 1459 2000
  17. Hayes, R. E. Liu, B. Votsmeier, M. “Calculating effectiveness factors in non-uniform washcoat shapes” Chemical Engineering Science 60 2005 2037 2050 2005
  18. Dieterich, E. E. “Systematische Bilanzierung und modulare Simulation verfahrenstechnischer Apparate” Ph.D. thesis, Wissenschaftsverlag Aachen, Ph.D. thesis The University of Stuttgart 1998
  19. Massing, E. Brilhac, J.F. Brillard, A. Gilot, P. Prado, G. “Modelling of the behavior of a three way catalytic converter at steady state. Influence of the propene diffusion inside the catalytic layer” Chemical Engineering Science 55 2000 1707 1716 2000
  20. Wurzenberger, J. C. Wallner, S. Raupenstrauch, K. Khinast, J. “Biomass Gasification - Comprehensive Reactor and Particle Modelling” AIChE Journal 48 2002 10 2398 2411 2002
  21. AVL List GmbH “BOOST Aftertreatment Manual v2011” AVL List GmbH Graz 2011
  22. AVL List GmbH “FIRE Aftertreatment Manual v2011” AVL List GmbH Graz 2011
  23. Hayes, R.E. Kolackowski, S. T. “Introduction to Catalytic Combustion” Gordon and Breach Science Publishers Amsterdam 1997
  24. Wendland, D. W. “The Segmented Oxidizing Monolith Catalytic Converter, Theory and Performance” Transactions to ASME 12 1980 194 198 1980
  25. Wanker, R. Raupenstauch, H. Staudinger, G. “A fully distributed model for the simulation of a catalytic combustor” Chemical Engineering Science 55 2000 4709 4718 2000
  26. Wurzenberger, J. Wanker, R. Schüßler, M. “Simulation of Exhaust Gas Aftertreatment Systems - Thermal Behavior During Different Operating Conditions,” SAE Technical Paper 2008-01-0865 2008 10.4271/2008-01-0865
  27. Dubien, C. Schweich, D. Mabilon, G. Martin, B. Prigent, M. “Three-way catalytic converter modelling: fast and slow-oxidizing hydrocarbons, inhibition species, and steam reforming reactions” Chemical Engineering Science 53 1998 471 481 1998
  28. Koltsakis, G. Stamatelos, A. M. “Modeling dynamic phenomena in 3-way catalytic converters” Chemical Engineering Science 54 1999 4567 4578 1999
  29. Khinast, J. “Kinetik, Reaktionsmechanismus und Simulation eines trockenen Rauchgasentschwefelungsverfahren” PhD-thesis Graz University of Technology 1995
  30. Wheeler, A. Emmett, P.H. Catalysis Reinhold New York II 105 1955
  31. Wakao, W. Smith, J.M. “Diffusion in catalyst pellets” Chemical Engineering Science 17 1962 825 834 1962
  32. Hayes, R.E. Kolackowski, S.T. Li, P.K.C. Awdry, S. “Evaluating the effective diffusivity of methane in the washcoat of a honeycomb monolith” Applied Catalysis B: Environmental 25 2000 93 104 2000
  33. Zill, D. G. Cullen, M. R. “Advanced Engineering Mathematics” 2 nd Jones and Bartlett Publishers 0-7637-1357-0 697 699 2000
  34. Baehr, H. D. Stephan, K. “Wärme- und Stoffübertragung” Springer-Verlag Berlin Heidelberg 3-540-55086-0 246 251 1994
  35. Voltz, S. E. Morgan, C. R. Liederman, D. Jacob, S. M. “Kinetic Study of Carbon Monoxide and Propylene Oxidation on Platinum Catalysts” Industrial and Engineering Chemistry Product Research and Development 12 4 294 301 1973
  36. AVL List GmbH “FIRE Main Solver Manual v2011” AVL List GmbH Graz 2011

Cited By