Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

The Interaction of Fuel Anti-Knock Index and Cooled EGR on Engine Performance and Efficiency

Journal Article
2012-01-1149
ISSN: 1946-3936, e-ISSN: 1946-3944
DOI: https://doi.org/10.4271/2012-01-1149
Published April 16, 2012 by SAE International in United States
The Interaction of Fuel Anti-Knock Index and Cooled EGR on Engine Performance and Efficiency
Sector:
Citation: Alger, T., Mangold, B., Roberts, C., and Gingrich, J., "The Interaction of Fuel Anti-Knock Index and Cooled EGR on Engine Performance and Efficiency," SAE Int. J. Engines 5(3):1229-1241, 2012, https://doi.org/10.4271/2012-01-1149.
Language: English

References

  1. Matthews, R.D. Internal Combustion Engines 2000
  2. Dahl, D. Denbratt, I. Koopmans, L. “An Evaluation of Different Combustion Strategies for SI Engines in a Multi-Mode Combustion Engine,” SAE Int. J. Engines 1 1 324 335 2009 10.4271/2008-01-0426
  3. Cleary, D. Silvas, G. “Unthrottled Engine Operation with Variable Intake Valve Lift, Duration, and Timing,” SAE Technical Paper 2007-01-1282 2007 10.4271/2007-01-1282
  4. Miura, H. Matsuura, T. Murata, T. Ikematsu, K. “Development of a New Generation V8 Engine with Variable Valve Event and Lift,” SAE Technical Paper 2008-01-1526 2008 10.4271/2008-01-1526
  5. Leone, T. Christenson, E. Stein, R. “Comparison of Variable Camshaft Timing Strategies at Part Load,” SAE Technical Paper 960584 1996 10.4271/960584
  6. Stein, R. Galietti, K. Leone, T. “Dual Equal VCT - A Variable Camshaft Timing Strategy for Improved Fuel Economy and Emissions,” SAE Technical Paper 950975 1995 10.4271/950975
  7. Lake, T. Stokes, J. Murphy, R. Osborne, R. et al. “Turbocharging Concepts for Downsized DI Gasoline Engines,” SAE Technical Paper 2004-01-0036 2004 10.4271/2004-01-0036
  8. December 2004 “Petrol Engines in the BMW Group / PSA Peugeot Citroën Cooperation”
  9. Coltman, D. Turner, J. Curtis, R. Blake, D. et al. “Project Sabre: A Close-Spaced Direct Injection 3-Cylinder Engine with Synergistic Technologies to Achieve Low CO2 Output,” SAE Int. J. Engines 1 1 129 146 2009 10.4271/2008-01-0138
  10. Schwarz, C. Schünemann, E. Durst, B. Fischer, J. et al. “Potentials of the Spray-Guided BMW DI Combustion System,” SAE Technical Paper 2006-01-1265 2006 10.4271/2006-01-1265
  11. Cairns, A. Blaxill, H. Irlam, G. “Exhaust Gas Recirculation for Improved Part and Full Load Fuel Economy in a Turbocharged Gasoline Engine,” SAE Technical Paper 2006-01-0047 2006 10.4271/2006-01-0047
  12. Duchaussoy, Y. Lefebvre, A. Bonetto, R. “Dilution Interest on Turbocharged SI Engine Combustion,” SAE Technical Paper 2003-01-0629 2003 10.4271/2003-01-0629
  13. Alger, T. Chauvet, T. Dimitrova, Z. “Synergies between High EGR Operation and GDI Systems,” SAE Int. J. Engines 1 1 101 114 2009 10.4271/2008-01-0134
  14. Grandin, B. Olofsson, E. “Knock Suppression in a Turbocharged SI Engine by Using Cooled EGR,” SAE Technical Paper 982476 1998 10.4271/982476
  15. Alger, T. Hanhe, S. Roberts, C. Ryan, T. “The Heavy Duty Gasoline Engine - A Multi-Cylinder Study of a High Efficiency, Low Emission Technology,” SAE Technical Paper 2005-01-1135 2005 10.4271/2005-01-1135
  16. Roberts, C. Snyder, J. Stovell, C. Dodge, L. et al. “The Heavy-Duty Gasoline Engine - An Alternative to Meet Emissions Standards of Tomorrow,” SAE Technical Paper 2004-01-0984 2004 10.4271/2004-01-0984
  17. Heywood, J.B. Internal Combustion Engine Fundamentals 1988 New York, NY McGraw-Hill, Inc.
  18. Anderson, R. “The Effect of Ignition System Power on Fast Burn Engine Combustion,” SAE Technical Paper 870549 1987 10.4271/870549
  19. Weinrotter, M. Ast, G. Kopecek, H. Wintner, E. “An Extensive Comparison of Laser-Induced Plasma Ignition and Conventional Spark Plug Ignition of Lean Methane-Air Mixtures under Engine-Like Conditions,” SAE Technical Paper 2005-01-0248 2005 10.4271/2005-01-0248
  20. Kettner, M. Nauwerck, A. Spicher, U. Seidel, J. et al. Microwave-based Ignition Principle for Gasoline Engines with Direct Injection and Spray Guided Combustion System MTZ
  21. Alger, T. Gingrich, J. Mangold, B. “The Effect of Hydrogen Enrichment on EGR Tolerance in Spark Ignited Engines,” SAE Technical Paper 2007-01-0475 2007 10.4271/2007-01-0475
  22. D'Andrea, T. Henshaw, P.F. Ting, D.S.-K. The addition of hydrogen to a gasoline-fuelled SI engine International Journal of Hydrogen Energy 14
  23. Goldwitz, J. Heywood, J. “Combustion Optimization in a Hydrogen-Enhanced Lean-Burn SI Engine,” SAE Technical Paper 2005-01-0251 2005 10.4271/2005-01-0251
  24. Ivanič, Ž. Ayala, F. Goldwitz, J. Heywood, J. “Effects of Hydrogen Enhancement on Efficiency and NOx Emissions of Lean and EGR-Diluted Mixtures in a SI Engine,” SAE Technical Paper 2005-01-0253 2005 10.4271/2005-01-0253
  25. Jamal, Y. Wagner, T. Wyszynski, M. Exhaust gas reforming of gasoline at moderate temperatures International Journal of Hydrogen Energy 6
  26. Tully, E. Heywood, J. “Lean-Burn Characteristics of a Gasoline Engine Enriched with Hydrogen Plasmatron Fuel Reformer,” SAE Technical Paper 2003-01-0630 2003 10.4271/2003-01-0630
  27. Ayala, F. Gerty, M. Heywood, J. “Effects of Combustion Phasing, Relative Air-fuel Ratio, Compression Ratio, and Load on SI Engine Efficiency,” SAE Technical Paper 2006-01-0229 2006 10.4271/2006-01-0229
  28. Gerty, M. Heywood, J. “An Investigation of Gasoline Engine Knock Limited Performance and the Effects of Hydrogen Enhancement,” SAE Technical Paper 2006-01-0228 2006 10.4271/2006-01-0228
  29. Topinka, J. Gerty, M. Heywood, J. Keck, J. “Knock Behavior of a Lean-Burn, H2 and CO Enhanced, SI Gasoline Engine Concept,” SAE Technical Paper 2004-01-0975 2004 10.4271/2004-01-0975
  30. “High Speed Data Acquisition System (HSDACS)” Scientific Research Laboratories, Ford Motor Company
  31. Alger, T. Mangold, B. “Dedicated EGR: A New Concept in High Efficiency Engines,” SAE Int. J. Engines 2 1 620 631 2009 10.4271/2009-01-0694
  32. Alger, T. Gingrich, J. Khalek, I. Mangold, B. “The Role of EGR in PM Emissions from Gasoline Engines,” SAE Int. J. Fuels Lubr. 3 1 85 98 2010 10.4271/2010-01-0353
  33. Alger, T. Gingrich, J. Mangold, B. Roberts, C. “A Continuous Discharge Ignition System for EGR Limit Extension in SI Engines,” SAE Int. J. Engines 4 1 677 692 2011 10.4271/2011-01-0661
  34. Chadwell, C. Alger, T. Roberts, C. Arnold, S. “Boosting Simulation of High Efficiency Alternative Combustion Mode Engines,” SAE Int. J. Engines 4 1 375 393 2011 10.4271/2011-01-0358
  35. Alger, T. Gingrich, J. Mangold, B. Roberts, C. 2010 “Cooled EGR for Fuel Economy and Emissions Improvement in Gasoline Engines” JSAE Paper 447-20105013
  36. Alger, T. Mehta, D. Neely, G. Chadwell, C. 2008 “Comparison of Low-Temperature Combustion Techniques Across Engine Platforms” 8th International Symposium on Internal Combustion Diagnostics
  37. Glassman, I. Combustion 1996 San Diego Academic Press, Inc.
  38. Kuo, K. Principles of Combustion 1986 New York John Wiley & Sons, Inc.
  39. Matthews, R.D. Internal Combustion Engines 2009
  40. Konigstein, A. Larsson, P. Grebe, U. Wu, K. 2007 “Differentiated Analysis of Downsizing Concepts” Vienna Motor Symposium

Cited By

Recommended Content

Technical Paper A Lean Burn Gasoline Fueled Pre-Chamber Jet Ignition Combustion System Achieving High Efficiency and Low NOx at Part Load
Technical Paper Correlation between Spark Ignition Characteristics and Flame Development in a Constant-Volume Combustion Chamber
Technical Paper Experimental Studies of Gasoline Auxiliary Fueled Turbulent Jet Igniter at Different Speeds in Single Cylinder Engine