Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Boosted HCCI Combustion Using Low-Octane Gasoline with Fully Premixed and Partially Stratified Charges

Journal Article
2012-01-1120
ISSN: 1946-3936, e-ISSN: 1946-3944
DOI: https://doi.org/10.4271/2012-01-1120
Published April 16, 2012 by SAE International in United States
Boosted HCCI Combustion Using Low-Octane Gasoline with Fully Premixed and Partially Stratified Charges
Sector:
Citation: Yang, Y., Dec, J., Dronniou, N., and Cannella, W., "Boosted HCCI Combustion Using Low-Octane Gasoline with Fully Premixed and Partially Stratified Charges," SAE Int. J. Engines 5(3):1075-1088, 2012, https://doi.org/10.4271/2012-01-1120.
Language: English

References

  1. Olsson, J. Tunestål, P. Johansson, B. Fiveland, S. et al. “Compression Ratio Influence on Maximum Load of a Natural Gas Fueled HCCI Engine,” SAE Technical Paper 2002-01-0111 2002 10.4271/2002-01-0111
  2. Sjöberg, M. Dec, J. Babajimopoulos, A. Assanis, D. “Comparing Enhanced Natural Thermal Stratification Against Retarded Combustion Phasing for Smoothing of HCCI Heat-Release Rates,” SAE Technical Paper 2004-01-2994 2004 10.4271/2004-01-2994
  3. Sjöberg, M. Dec, J.E. “Comparing Late-Cycle Autoignition Stability for Single-and Two-Stage Ignition Fuels in HCCI Engines” Proceedings of the Combustion Institute 2007 31 2895 2902
  4. Dahl, D. Andersson, M. Berntsson, A. Denbratt, I. et al. “Reducing Pressure Fluctuations at High Loads by Means of Charge Stratification in HCCI Combustion with Negative Valve Overlap,” SAE Technical Paper 2009-01-1785 2009 10.4271/2009-01-1785
  5. Sjöberg, M. Dec, J. “Smoothing HCCI Heat-Release Rates Using Partial Fuel Stratification with Two-Stage Ignition Fuels,” SAE Technical Paper 2006-01-0629 2006 10.4271/2006-01-0629
  6. Wada, Y. Senda, J. “Demonstrating the Potential of Mixture Distribution Control for Controlled Combustion and Emissions Reduction in Premixed Charge Compression Ignition Engines,” SAE Technical Paper 2009-01-0498 2009 10.4271/2009-01-0498
  7. Yang, Y. Dec, J.E. Dronniou, N. Sjöberg, M. “Tailoring HCCI Heat Release Rates with Partial Fuel Stratification: Comparison of Two-Stage and Single-Stage Ignition Fuels” Proceedings of the Combustion Institute 2011 33 2 3047 3055
  8. Berntsson, A. Denbratt, I. “HCCI Combustion Using Charge Stratification for Combustion Control,” SAE Technical Paper 2007-01-0210 2007 10.4271/2007-01-0210
  9. Dec, J. Sjöberg, M. “Isolating the Effects of Fuel Chemistry on Combustion Phasing in an HCCI Engine and the Potential of Fuel Stratification for Ignition Control,” SAE Technical Paper 2004-01-0557 2004 10.4271/2004-01-0557
  10. Dec, J. Yang, Y. Dronniou, N. “Boosted HCCI - Controlling Pressure-Rise Rates for Performance Improvements using Partial Fuel Stratification with Conventional Gasoline,” SAE Int. J. Engines 4 1 1169 1189 2011 10.4271/2011-01-0897
  11. Yang, Y. Dec, J. Dronniou, N. Sjöberg, M. et al. “Partial Fuel Stratification to Control HCCI Heat Release Rates: Fuel Composition and Other Factors Affecting Pre-Ignition Reactions of Two-Stage Ignition Fuels,” SAE Int. J. Engines 4 1 1903 1920 2011 10.4271/2011-01-1359
  12. Kokjohn, S. Hanson, R. Splitter, D. Reitz, R. “Experiments and Modeling of Dual-Fuel HCCI and PCCI Combustion Using In-Cylinder Fuel Blending,” SAE Int. J. Engines 2 2 24 39 2010 10.4271/2009-01-2647
  13. Splitter, D. Hanson, R. Kokjohn, S. Reitz, R. “Reactivity Controlled Compression Ignition (RCCI) Heavy-Duty Engine Operation at Mid-and High-Loads with Conventional and Alternative Fuels,” SAE Technical Paper 2011-01-0363 2011 10.4271/2011-01-0363
  14. Kokjohn, S. Hanson, R. Splitter, D. Kaddatz, J. et al. “Fuel Reactivity Controlled Compression Ignition (RCCI) Combustion in Light- and Heavy-Duty Engines,” SAE Int. J. Engines 4 1 360 374 2011 10.4271/2011-01-0357
  15. Hanson, R. Kokjohn, S. Splitter, D. Reitz, R. “An Experimental Investigation of Fuel Reactivity Controlled PCCI Combustion in a Heavy-Duty Engine,” SAE Int. J. Engines 3 1 700 716 2010 10.4271/2010-01-0864
  16. Dec, J. Yang, Y. “Boosted HCCI for High Power without Engine Knock and with Ultra-Low NOx Emissions - using Conventional Gasoline,” SAE Int. J. Engines 3 1 750 767 2010 10.4271/2010-01-1086
  17. Wang, M. Lee, H. Molburg, J. “Allocation of energy use in petroleum refineries to petroleum products - Implications for life-cycle energy use and emission inventory of petroleum transportation fuels” International Journal of Life Cycle Assessment 2004 9 1 34 44
  18. Yao, M. Zheng, Z. Zhang, B. Chen, Z. “The Effect of PRF Fuel Octane Number on HCCI Operation,” SAE Technical Paper 2004-01-2992 2004 10.4271/2004-01-2992
  19. Szybist, J. Bunting, B. “The Effects of Fuel Composition and Compression Ratio on Thermal Efficiency in an HCCI Engine,” SAE Technical Paper 2007-01-4076 2007 10.4271/2007-01-4076
  20. Sjöberg, M. Dec, J. “Influence of Fuel Autoignition Reactivity on the High-Load Limits of HCCI Engines,” SAE Int. J. Engines 1 1 39 58 2009 10.4271/2008-01-0054
  21. Shibata, G. Urushihara, T. “Auto-Ignition Characteristics of Hydrocarbons and Development of HCCI Fuel Index,” SAE Technical Paper 2007-01-0220 2007 10.4271/2007-01-0220
  22. Akihama, K. Kosaka, H. Hotta, Y. Nishikawa, K. et al. “An Investigation of High Load (Compression Ignition) Operation of the “Naphtha Engine” - a Combustion Strategy for Low Well-to-Wheel CO 2 Emissions,” SAE Int. J. Fuels Lubr. 1 1 920 932 2009 10.4271/2008-01-1599
  23. Lu, X.C. Chen, W. Huang, Z. “A fundamental study on the control of the HCCI combustion and emissions by fuel design concept combined with controllable EGR. Part 1. The basic characteristics of HCCI combustion” Fuel 2005 84 9 1074 1083
  24. Lu, X.C. Chen, W. Huang, Z. “A fundamental study on the control of the HCCI combustion and emissions by fuel design concept combined with controllable EGR. Part 2. Effect of operating conditions and EGR on HCCI combustion” Fuel 2005 84 9 1084 1092
  25. Bessonette, P. Schleyer, C. Duffy, K. Hardy, W. et al. “Effects of Fuel Property Changes on Heavy-Duty HCCI Combustion,” SAE Technical Paper 2007-01-0191 2007 10.4271/2007-01-0191
  26. Dec, J. Sjöberg, M. “A Parametric Study of HCCI Combustion - the Sources of Emissions at Low Loads and the Effects of GDI Fuel Injection,” SAE Technical Paper 2003-01-0752 2003 10.4271/2003-01-0752
  27. Heywood, J.B. Internal Combustion Engine Fundamentals 1988 New York McGraw-Hill
  28. Eng, J. “Characterization of Pressure Waves in HCCI Combustion,” SAE Technical Paper 2002-01-2859 2002 10.4271/2002-01-2859
  29. Sjoberg, M. Dec, J. “Ethanol Autoignition Characteristics and HCCI Performance for Wide Ranges of Engine Speed, Load and Boost,” SAE Int. J. Engines 3 1 84 106 2010 10.4271/2010-01-0338
  30. Dec, J. Yang, Y. Dronniou, N. “Improving Efficiency and using E10 for Higher Loads in Boosted HCCI Engines,” SAE Int. J. Engines 5 3 1009 1032 2012 10.4271/2012-01-1107

Cited By

Recommended Content

Technical Paper Isolating the Effects of Fuel Chemistry on Combustion Phasing in an HCCI Engine and the Potential of Fuel Stratification for Ignition Control
Technical Paper Effects of Variations in Market Gasoline Properties on HCCI Load Limits
Technical Paper HCCI Octane Number Scale in a Pressure-Temperature Diagram