This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Analysis of Combustion and Emissions in a EURO V Diesel Engine by Means of a Refined Quasi-Dimensional Multizone Diagnostic Model

Journal Article
2012-01-1066
ISSN: 1946-3936, e-ISSN: 1946-3944
Published April 16, 2012 by SAE International in United States
Analysis of Combustion and Emissions in a EURO V Diesel Engine by Means of a Refined Quasi-Dimensional Multizone Diagnostic Model
Sector:
Citation: Finesso, R. and Spessa, E., "Analysis of Combustion and Emissions in a EURO V Diesel Engine by Means of a Refined Quasi-Dimensional Multizone Diagnostic Model," SAE Int. J. Engines 5(3):886-908, 2012, https://doi.org/10.4271/2012-01-1066.
Language: English

References

  1. Catania, A. d'Ambrosio, S. Ferrari, A. Finesso, R. et al. “Experimental Analysis of Combustion Processes and Emissions in a 2.0L Multi-Cylinder Diesel Engine Featuring a New Generation Piezo-Driven Injector,” SAE Technical Paper 2009-24-0040 2009 10.4271/2009-24-0040
  2. Catania, A. Finesso, R. Spessa, E. “Diagnostics of Mixing Process Dynamics, Combustion and Emissions in a Euro V Diesel Engine,” SAE Technical Paper 2011-24-0018 2011 10.4271/2011-24-0018
  3. Musculus, M. Kattke, K. “Entrainment Waves in Diesel Jets,” SAE Int. J. Engines 2 1 1170 1193 2009 10.4271/2009-01-1355
  4. Pickett, L. Manin, J. Genzale, C. Siebers, D. et al. “Relationship Between Diesel Fuel Spray Vapor Penetration/Dispersion and Local Fuel Mixture Fraction,” SAE Int. J. Engines 4 1 764 799 2011 10.4271/2011-01-0686
  5. Baratta, M. Catania, A.E. Ferrari, A. Finesso, R. Spessa, E. “Premixed-Diffusive Multizone Model for Combustion Diagnostics in Conventional and PCCI Diesel Engines” ‘Journal of Engineering for Gas Turbines and Power’, ASME Transactions 133 10 102801-1 102801-13 0742-4795 2011
  6. Dec, J. “A Conceptual Model of DI Diesel Combustion Based on Laser-Sheet Imaging*,” SAE Technical Paper 970873 1997 10.4271/970873
  7. Kitamura, T. Ito, T. Senda, J. Fujimoto, H. “Mechanism of smokeless diesel combustion with oxygenated fuels based on the dependence of the equivalence ratio and temperature on soot particle formation” International Journal of Engine Research 2002 223 248
  8. Westlund, A. Ångström, H. Lindström, M. “Validation of a Simplified Model for Combustion and Emission Formation in Diesel Engines Based on Correlations for Spray Penetration and Dispersion, Gas Entrainment into Sprays and Flame Lift-off,” SAE Technical Paper 2010-01-1494 2010 10.4271/2010-01-1494
  9. Seykens, X. Baert, R. Somers, L. Willems, F. “Experimental Validation of Extended NO and Soot Model for Advanced HD Diesel Engine Combustion,” SAE Int. J. Engines 2 1 606 619 2009 10.4271/2009-01-0683
  10. Naber, J. Siebers, D. “Effects of Gas Density and Vaporization on Penetration and Dispersion of Diesel Sprays,” SAE Technical Paper 960034 1996 10.4271/960034
  11. Siebers, D. “Scaling Liquid-Phase Fuel Penetration in Diesel Sprays Based on Mixing-Limited Vaporization,” SAE Technical Paper 1999-01-0528 1999 10.4271/1999-01-0528
  12. Siebers, D. Higgins, B. Pickett, L. “Flame Lift-Off on Direct-Injection Diesel Fuel Jets: Oxygen Concentration Effects,” SAE Technical Paper 2002-01-0890 2002 10.4271/2002-01-0890
  13. Musculus, M. “Multiple Simultaneous Optical Diagnostic Imaging of Early-Injection Low-Temperature Combustion in a Heavy-Duty Diesel Engine,” SAE Technical Paper 2006-01-0079 2006 10.4271/2006-01-0079
  14. Bobba, M. Genzale, C. Musculus, M. “Effect of Ignition Delay on In-Cylinder Soot Characteristics of a Heavy Duty Diesel Engine Operating at Low Temperature Conditions,” SAE Int. J. Engines 2 1 911 924 2009 10.4271/2009-01-0946
  15. D'Ambrosio, S. Finesso, R. Spessa, E. “Calculation Of Mass Emissions, Oxygen Mass Fraction And Thermal Capacity Of The Inducted Charge In SI And Diesel Engines From Exhaust And Intake Gas Analysis” Fuel 90 1 152 166 2011 Elsevier 0016-2361 10.1016/j.fuel.2010.08.025
  16. Dec, J. Espey, C. “Ignition and Early Soot Formation in a DI Diesel Engine Using Multiple 2-D Imaging Diagnostics*,” SAE Technical Paper 950456 1995 10.4271/950456
  17. Westlund, A. Ångström, H. “Fast Physical Prediction of NO and Soot in Diesel Engines,” SAE Technical Paper 2009-01-1121 2009 10.4271/2009-01-1121
  18. Lapuerta, M. Hernández, J. Armas, O. “Kinetic Modelling of Gaseous Emissions in a Diesel Engine,” SAE Technical Paper 2000-01-2939 2000 10.4271/2000-01-2939
  19. Woschni, G. “A Universally Applicable Equation for the Instantaneous Heat Transfer Coefficient in the Internal Combustion Engine,” SAE Technical Paper 670931 1967 10.4271/670931
  20. Woschni, G. Spinder, W. “Heat Transfer with Insulated Combustion Chamber Walls and Its Influence on the Performance of Diesel Engines” ASME Trans., Journal of Engineering for Gas Turbines and Power 110 482 502 1988
  21. Huber, K. Woschni, G. Zeilinger, K. “Investigations on Heat Transfer Internal Combustion Engines under Low Load and Motoring Conditions” Proceedings, XXIII FISITA Congress Torino ATA I 151 159 1990
  22. Miller, R. Davis, G. Lavoie, G. Newman, C. et al. “A Super-Extended Zel'dovich Mechanism for Nox Modeling and Engine Calibration,” SAE Technical Paper 980781 1998 10.4271/980781
  23. Kaario, O. Antila, E. Larmi, M. “Applying Soot Phi-T Maps for Engineering CFD Applications in Diesel Engines,” SAE Technical Paper 2005-01-3856 2005 10.4271/2005-01-3856
  24. Assanis, D.N. Jung, D. “Quasidimensional Modeling of Direct Injection Diesel Engine Nitric Oxide, Soot, and Unburned Hydrocarbon Emissions” Transactions of the ASME 128 288 396 April 2006
  25. Perini, F. Mattarelli, E. Paltrinieri, F. “Development and Validation of Predictive Emissions Schemes for Quasi-Dimensional Combustion Models,” SAE Technical Paper 2010-01-0148 2010 10.4271/2010-01-0148
  26. Catania, A. d'Ambrosio, S. Finesso, R. Spessa, E. “Effects of Rail Pressure, Pilot Scheduling and EGR Rate on Combustion and Emissions in Conventional and PCCI Diesel Engines,” SAE Int. J. Engines 3 1 773 787 2010 10.4271/2010-01-1109
  27. Aoyagi, Y. Kamimoto, T. Matsui, Y. Matsuoka, S. “A Gas Sampling Study on the Formation Processes of Soot and NO in a DI Diesel Engine,” SAE Technical Paper 800254 1980 10.4271/800254
  28. Catania, A.E. Ferrari, A. Spessa, E. “Numerical-Experimental Study and Solutions to Reduce the Dwell Time Threshold for Fusion-Free Consecutive Injections in a Multijet Solenoid-Type C.R. System” Journal of Engineering for Gas Turbines and Power 2009 131 022804-1 022804-14 0742-4795 10.1115/1.2938394

Cited By