Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Zero-Dimensional Modeling of Combustion and Heat Release Rate in DI Diesel Engines

Journal Article
2012-01-1065
ISSN: 1946-3936, e-ISSN: 1946-3944
DOI: https://doi.org/10.4271/2012-01-1065
Published April 16, 2012 by SAE International in United States
Zero-Dimensional Modeling of Combustion and Heat Release Rate in DI Diesel Engines
Sector:
Citation: Rezaei, R., Eckert, P., Seebode, J., and Behnk, K., "Zero-Dimensional Modeling of Combustion and Heat Release Rate in DI Diesel Engines," SAE Int. J. Engines 5(3):874-885, 2012, https://doi.org/10.4271/2012-01-1065.
Language: English

References

  1. Eckert, P. Henning, L. Rezaei, R. Seebode, J. et al. “Management of Energy Flow in Complex Commercial Vehicle Powertrains,” SAE Technical Paper 2012-01-0724 2012
  2. Vibe, I. I. “Brennverlauf und Kreisprozess von Verbrennungsmotoren” VEB Verlag Technik Berlin 1970
  3. Rezaei, R. “Numerical Investigation of the Effect of In-Cylinder Flow on Combustion and Emissions of a Direct Injection Diesel Engine” PhD thesis Institute for Combustion Engines (VKA), RWTH Aachen University 2011
  4. Chmela, F. Pirker, G. Wimmer, A. “Zero-dimensional ROHR simulation for DI diesel engines - A generic approach” Journal of energy conversion and Management 48 2942 2950 2007
  5. Chmela, F. Pirker, G. Losonczi, B. Wimmer, A. Desantes, J.M. García-Oliver, J.M. “A New Burn Rate Simulation Model for Improved Prediction of Multiple Injection Effects on Large Diesel Engines” Thiesel Conference 2010
  6. Stiesch, G. “Modeling Engine Spray and Combustion Processes” Springer-Verlag 2003
  7. Barba, C. “Erarbeitung von Verbrennungskennwerten aus Indizierdaten zur verbesserten Prognose und rechnerischen Simulation des Verbrennungsablaufes bei Pkw-DE-Dieselmotoren mit Common-Rail-Einspritzung” PhD Thesis Eidgenoessischen Technischen Hochschule Zuerich 2001
  8. Constien, M. Woschni, G. “Vorausberechnung des Brennverlaufes aus dem Einspritzverlauf für einen direkteinspritzenden Dieselmotor” MTZ 53 7/8 1992
  9. Hiroyasu, H. Kadota, T. Arai, M. “Development and Use of a Spray Combustion Modeling to Predict Diesel Engine Efficiency and Pollutant Emission, Part 1: Combustion Modeling” Bulletin of the JSME 26 214 1983
  10. Hiroyasu, H. Kadota, T. Arai, M. “Development and Use of a Spray Combustion Modeling to Predict Diesel Engine Efficiency and Pollutant Emission, Part 2: Computational Procedure and Parametric Study” Bulletin of the JSME 26 214 1983
  11. Gao, Z. Schreiber, W. “The Effects of EGR and Split Fuel Injections on Diesel Engine Emissions Int. J. Automotive Technol. 2 4 2001
  12. Morel, T. Wahiduzzaman, S. “Modeling of Diesel Combustion and Emissions,” FISITA 1996
  13. Stiesch, G. Merker, G. “A Phenomenological Model for Accurate and Time Efficient Prediction of Heat Release and Exhaust Emissions in Direct-Injection Diesel Engines,” SAE Technical Paper 1999-01-1535 1999 10.4271/1999-01-1535
  14. Thoma, M. Stiesch, G. Merker, G.P. “A Phenomenological Spray and Combustion Model for Diesel Engines with Pre-Injection” 5th Int Symp Internal Combustion Diagnostics Baden-Baden 2002
  15. Rether, D. Grill, M. Schmid, A. Bargende, M. “Quasi-Dimensional Modeling of CI-Combustion with Multiple Pilot- and Post Injections,” SAE Int. J. Engines 3 1 12 27 2010 10.4271/2010-01-0150
  16. Grill, M. “Zylindermodul” project no. 869, Research Association for Combustion Engines (Forschungsvereinigung Verbrennungskraftmaschinen e.V.), Abschlussbericht 2008
  17. Modeling of turbulence for Quasi-Dimensional Working Process Calculation project no. 1067, Research Association for Combustion Engines (Forschungsvereinigung Verbrennungskraftmaschinen e.V.) http://www.fvv-net.de 2011
  18. von Kuensberg Sarre, C. Kong, S. Reitz, R. “Modeling the Effects of Injector Nozzle Geometry on Diesel Sprays,” SAE Technical Paper 1999-01-0912 1999 10.4271/1999-01-0912
  19. Spalding, D. “Mathematical models of turbulent flames: A review” Combustion Science and Technology, Mathematical models of turbulent flames, Mathematical models of turbulent flames 13 3 25 1976
  20. Kong, S. Han, Z. Reitz, R. “The Development and Application of a Diesel Ignition and Combustion Model for Multidimensional Engine Simulation,” SAE Technical Paper 950278 1995 10.4271/950278
  21. Bergeron, C. A. Hallet, W. L. H. “Ignition characteristics of liquid hydrocarbon fuels as single droplets” Canadian Journal of Chemical Engineering 67 142 149 1989
  22. Heywood, J.B. “Internal Combustion Engine Fundamentals” McGraw-Hill 1988
  23. Magnussen, B. F. Hjertager, B. H. “On mathematical modeling of turbulent combustion with special emphasis on soot formation and combustion” 16th Symposium (International) on Combustion 719 729 1976
  24. Launder, B. E. Spalding, D. B. “The numerical computation of turbulent flows” Computer methods in applied mechanics and engineering 3 269 289 1974
  25. Seebode, J. Stegemann, J. Sommer, A. Stoelting, E. Buschmann, G. “Extreme Injection Pressure and Rate Shaping at a HD Single Cylinder Research Engine” 15 th Aachen Colloquium Automotive and Engine Technology 2006

Cited By

Recommended Content

Technical Paper LES of Flow Processes in an SI Engine Using Two Approaches: OpenFoam and PsiPhi
Technical Paper Development of a Quasi-Dimensional Spray Evaporation and Mixture Formation Model for Direct-Injection Spark-Ignition Engines
Technical Paper Tuning of the Engine Control Variables of an Automotive Turbocharged Diesel Engine via Model Based Optimization