Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Correlation between Scatter in Fatigue Life and Fatigue Crack Initiation Sites in Cast Aluminum Alloys

Journal Article
2012-01-0920
ISSN: 1946-3979, e-ISSN: 1946-3987
DOI: https://doi.org/10.4271/2012-01-0920
Published April 16, 2012 by SAE International in United States
Correlation between Scatter in Fatigue Life and Fatigue Crack Initiation Sites in Cast Aluminum Alloys
Sector:
Citation: Zheng, X., Engler-Pinto, C., Su, X., Cui, H. et al., "Correlation between Scatter in Fatigue Life and Fatigue Crack Initiation Sites in Cast Aluminum Alloys," SAE Int. J. Mater. Manf. 5(1):270-276, 2012, https://doi.org/10.4271/2012-01-0920.
Language: English

References

  1. Seniw, M. E. Fine, M. E. Chen, E. Y. Meshii, M. Gray, J. 1998 “Relation of defect size and location to fatigue failure in Al alloy A 356 cast specimens” Proc. from High Cycle Fatigue of Structural Materials: Paul Paris Symposium Materials Week '97 Indianapolis, IN September 14 18 1997 TMS Warrendale, PA
  2. Boileau, J. M. Allison, J. E. “The Effect of Solidification Time and Heat Treatment on the Fatigue Properties of a Cast 319 Aluminum Alloy” METALLURGICAL AND MATERIALS TRANSACTIONS A 34A SEPTEMBER 2003 1807
  3. Couper, M. J. Neeson, A. E. Griffiths, J. R. 1990 “Casting defects and the fatigue behaviour of an aluminium casting alloy” Fatigue Fract. Engng Mater. Struct. 13 3 213 227
  4. JANG, YOUNGHWAN JIN, SANGUK JEONG, YOUIN KIM, SANGSHIK “Fatigue Crack Initiation Mechanism for Cast 319-T7 Aluminum Alloy” METALLURGICAL AND MATERIALS TRANSACTIONS A 40A JULY 2009 1579
  5. ZHANG, B. POIRIER, D.R. CHEN, W. “Microstructural effects on high-cycle fatigue-crack initiation in A356.2 casting alloy” METALLURGICAL AND MATERIALS TRANSACTIONS A 30A OCTOBER 1999 2659
  6. Wang, Q.G. Apelian, D. Lados, D.A. “Fatigue behavior of A356-T6 aluminum cast alloys. Part I. Effect of casting defects” Journal of Light Metals 1 2001 73 84
  7. Nisitani, H. Goto, M. Kawagoishi, N. “A Small-crack Growth Law and its Related Phenomena” Eng. Fract. Mech. 1992 41 4 499 513
  8. CATON, M.J. JONES, J.W. BOILEAU, J.M. ALLISON, J.E. “The Effect of Solidification Rate on the Growth of Small Fatigue Cracks in a Cast 319-Type Aluminum Alloy” METALLURGICAL AND MATERIALS TRANSACTIONS A 30A DECEMBER 1999 3055
  9. Shyam, A. Allison, J. E. Szczepanski, C. J. Pollock, T. M. Jones, J. W. “Small fatigue crack growth in metallic materials: A model and its application to engineering alloys” 2007 Acta Materialia 55 6606 6616
  10. Engler-Pinto, C. Lasecki, J. Frisch, R. DeJack, M. et al. “Statistical Approaches Applied to Fatigue Test Data Analysis,” SAE Technical Paper 2005-01-0802 2005 10.4271/2005-01-0802
  11. Pascual, F.G. Meeker, W.Q. “Estimating fatigue curves with the random fatigue-limit model” Technometrics 41 4 Nov. 1999
  12. Engler-Pinto, C. Lasecki, J. Boileau, J. Allison, J. “A Comparative Investigation on the High Temperature Fatigue of Three Cast Aluminum Alloys,” SAE Technical Paper 2004-01-1029 2004 10.4271/2004-01-1029
  13. Nyahumwa, C. Green, N.R. Campbell, J. “Influence of casting technique and hot isostatic pressing on the fatigue of an Al-7Si-Mg alloy” Metall. Mater. Trans. 2001 32A 349 58
  14. WANG, Q.G. DAVIDSON, C.J. GRIFFITHS, J.R. CREPEAU, P.N. “Oxide films, pores and the fatigue lives of cast aluminum alloys” METALLURGICAL AND MATERIALS TRANSACTIONS B 37B DECEMBER 2006 887
  15. YI, J.Z. GAO, Y.X. LEE, P.D. FLOWER, H.M. LINDLEY, T.C. “Scatter in fatigue life due to effects of porosity in cast A356-T6 aluminum-silicon alloys” METALLURGICAL AND MATERIALS TRANSACTIONS A 34A SEPTEMBER 2003 1879
  16. Abdel-Raouf, H. Topper, T.H. Plumtree, A. “A short fatigue crack model based on the nature of the free surface and its microstructure” Scripta Metallurgica et. Materialia 25 597 602 1991
  17. GALL, KEN HORSTEMEYER, MARK F. DEGNER, BRETT W. MCDOWELL, DAVID L. FAN, JINGHONG “On the driving force for fatigue crack formation from inclusions and voids in a cast A356 aluminum alloy” International Journal of Fracture 108 207 233 2001
  18. Murakami, Y. Endo, M. “Effects of defects, inclusions and inhomogeneities on fatigue strength” International Journal of Fatigue 1994 16 163 82

Cited By

Recommended Content

Journal Article Internal Residual Stress Measurement of Aluminum Alloy Castings Using Neutron Diffraction
Journal Article Fatigue Behavior and Life Prediction for Aluminum Castings in the Absence of Casting Flaws
Technical Paper Low Cycle Fatigue of A356-T6 Cast Aluminum Alloy - A Round-Robin Test Program